The titles and contact authors of submitted papers that have been reviewed and accepted (or accepted with minor revisions) for WCE 2010 are listed here:

titles_A_D, titles_E_N, titles_O_Others.

 

Titles (A_D)

Contact Authors
A Bacteria Foraging Algorithm Based Cell Formation Considering Operation Time Dr. H. Nouri
A Border-Based Approach for Hiding Fuzzy Weighted Sensitive Itemsets Dr. Mridula Verma  
A Buffer Stocks Model for Stabilizing Price of Staple Food with Considering the Expectation of Non Speculative Wholesaler Dr. W. Sutopo
A CMOS CHARGE-PUMP CIRCUIT FOR A WIRELESS ACCESS NETWORK POWER MODULE Dr. Krit Salahddine
A COMBINED PRACTICAL APPROACH TO CONDITION MONITORING OF RECIPROCATING COMPRESSORS USING IAS AND DYNAMIC PRESSUR Dr. M. Elhaj
A Comparative Analysis of Various Control Strategies Implemented on Heat Exchanger System: A Case Study Mr. Subhransu Padhee
A Comparative Framework for Evaluating Classification Algorithms Dr. Neslihan Dogan
A Comparative study of Load Capacity and Pressure Distribution of Infinitely wide Parabolic and Inclined Slider Bearings Dr. John A. Akpobi
A Comparison of Ulexite Mineral and Borax Decahydrate to Synthesize Zinc Borate DR. MEHMET BURCIN PISKIN
A Computational Fluid Dynamic Modeling Study of Slag Fuming in Top Submerged Lance Smelting Furnace Dr. Nazmul Huda
A Control Structure for Intelligent Emotion-Oriented eCommerce Systems Dr. Simone Leon 
A Direct BEM with Higher Order Boundary Elements for the Compressible Fluid Flow around Smooth Obstacles Dr. Grecu Luminita
A Fixed Point Approach to Ulam Stability Problem for Cubic and Quartic Mappings in Non-Archimedean Fuzzy Normed Spaces Dr. Renu Chugh and Dr. Sushma
A Gang SPWM Control for Six-phase Induction Motor Mr. Meng Cai 
A Geom/G/1/n Queueing System with LIFO Discipline, Service Interruptions and Resumption, and Restrictions on the Total Volume of Demands Dr. Sergey Shorgin
A Hybrid Algorithm for Simultaneous Retrieval of Thermal Conductivity and Time-Dependent Heat Flux Dr. Kourosh Amiraslani
A Hybrid Grouping Genetic Algorithm for Integrating Cell Formation and Cell Layout in Cellular Manufacturing System Dr. Payam Chiniforooshan
A HYBRID NEURAL NETWORK- META HEURISTICS APPROACH FOR PERMUTATION FLOW SHOP SCHEDULING PROBLEMS Dr. T. Radha Ramanan
A Local Search Method Using Histogram Features for Fast Retrieval of DNA Sequences Dr.  Qiu Chen
A Location Within Distribution Network Design Problem With Flexible Demand Dr. Faraz Ramtin
A Low Power and High Bandwidth Gm-C Anti Aliasing Filter for DAB Receivers Dr. M.M.Farhad
A Mathematical Approach for 2nd tier Supplier Selection when Considering Tolerance Design Dr. Jirarat Teeravaraprug
A Method For Fitting A pRARMAX Model: An Application To Financial Data Dr. Marta Ferreira
A Method for Linking Business Process Models and System Models Dr. Faisal Abu Rub
A Method for Testing AQM Controllers with Probability Guaranteed Properties Dr. Teresa Alvarez
A Method To Determine The Margin Of Safety For Microneedles Arrays Dr. Elena Forvi
A Methodology for Evaluating Mixed-mode (I + II) SIF, Combining Experimental Data Acquired by ESPI with Westergaard Type Solution Mr. Armin Hadadian
A Model-Based Taxonomy of Knowledge Development Scenarios Dr. Eckhard Ammann
A MODIFIED APPROACH TO INDUCTION MOTOR STATOR VOLTAGE AND FREQUENCY CONTROL Dr. C.U. Ogbuka
A Multistage Approach to the Design of Prototype Filters for Modulated Filter Banks Dr. Neela Rayavarapu
A New Approach for Removal of Caffeine from Coffee using Sunflower Oil Dr. Md Monwar Hossain
A New Approach to the Divergence of a Tensor and Application to the Curvature Tensor in the General Theory of Relativity Dr. Andrei Nicolaide
A New Hybrid Genetic and Simulated Annealing Algorithm to Solve the Traveling Salesman Problem Dr. Younis  Haddda
A New Proposed Location Registration Procedure in Next Generation Cellular Networks (NGCN) Dr. Azita Laily Yusof
A Non Parametric Analysis of Asymptomatic Hazard Rates in a Brewing Plant Using the Probability Failure Functions Dr J. I. Achebo
A Nonparametric Analysis of Asymptomatic Hazard Rates in a Brewing Plant Using the Probability Failure Functions Dr Joseph Achebo
A Note on Chromaticity of Certain 6-Partite Graphs Dr Roslan Hasni
A Novel Hybrid Simplex-Genetic Algorithm For The Optimum Design Of Truss Structures Dr. M. Aslani
A Practical Optimization Techniques for M X/D/1 Queuing Model Dr. pradeep k. joshi
A Push-Pull Manufacturing Strategy: Analytical Model in the Screw Cutting Sector Dr. Barbara Lyonnet
A Simulation-Based Decision Making Tool for Key Warehouse Resources Selections Dr. Safwan A. Altarazi
A STRONG CONVERGENCE THEOREM FOR TWO ASYMPTOTICALLY NONEXPANSIVE MAPPINGS IN A STRICTLY CONVEX BANACH SPACE Dr. Mujahid Abbas
A STUDY ON BIOCOMPATIBILITY OF BIOMATERIALS FOR BIOENGINEERING Dr. Sujeet kumar
A Study on the Blended Wax Patterns in Investment Casting Process Dr. D. Benny Karunakar
A Survey of E-Learning Platforms in Mauritius Dr. Sameerchand Pudaruth
A Survey of TQM Practices in North Karnataka Manufacturing SMEs: an Empirical Evaluation Dr. S B MALLUR
A Sustainable Engineering Infrastructure Model for the 21st Century Dr. Sunday Ekpo
A System Dynamics Approach to Reduce Total Inventory Cost in an Airline Fueling System Dr. Abbas Al-Refaie
A Ternary Arithmetic and Logic Dr. Ion Profeanu
A Traditional Logistics Problem Dr. Muhammad Latif
A Two-level Structural Equation Model for Analyzing Longitudinal Responses Prof. Sik-Yum Lee
A Unified Model between the OWA Operator and the Weighted Average in Decision Making with Dempster-Shafer Theory Dr. Jose M. Merigo
Accidents in Pressure Vessels: Hazard Awareness Dr. Temilade Ladokun
Acoustic Emission of a Single Bubble Activities Dr. Shuib Husin
Advancement in Insulcagon Pump Simulating as an Artificial Pancreas for the Treatment of Diabetes Engr.SYED GHUFRAN KHALID
Aero-Optic Effects in Turbulent Wall-Bounded and Free Shear Flows Dr K Volkov
Aerospace-Academia: ERP-Communication Framework Strategy Dr. M Asif Rashid
Agent Coordination and Disaster Prediction in Persia 2007, A RoboCup Rescue Simulation Team based on Learning Automata Dr. Mohammad Reza Khojasteh
Agile Methodology in Software Development (SMEs) of Pakistan Software Industry for Successful Software Projects (CMM Framework) Dr. Muhammad Ishfaq Khan
Air Pressure Dependence of Natural-Convection Heat Transfer Mr. Maysam Saidi
An Analytical Investigation of the Physical Dimensions of Natural Convection Flow on a Vertical Heated Plate Dr Manosh C Paul
An Application of Neural Networks for Forecasting Container Throughput at Bangkok Port Dr. Watcharavee Chandraprakaikul
An Approach to control the diabetes Mrs. Surekha Kamath
An Assessment of Machine Tools Utilisation Effectiveness in the Developing Economy Dr. B. Kareem
An Assessment Of The Performance Of Bluetooth As A Broadcasting Channel Dr. Sameerchand Pudaruth
An Axisymmetric Inverse Approach for Cold Forging Modeling Dr. Boussad Abbes
An Effective Intelligent Educational Model Using Agent with Personality and Emotional Filters Dr. S. Fatahi
An Efficient Algorithm for Integer Pixel Motion Estimation Based on H.264/AVC Dr. ZHOU WEI
An Efficient Parallel Algorithm for Longest Common Subsequence Problem on GPUs Dr. Jiaoyun Yang
An Efficient Recognition Method for Arabic OCR Dr. Haidar Almohri
An Evaluation and a Comparison of 3D-OSEM with Resolution Recovery (HOSEM) Versus Flash 3D Dr. Khalid Alzimami
An Evidence Model to Enable Constraint-Based Runtime Monitoring in SOA Dr. Dr. Philip Miseldine
An Evolutionary Solution to a Multi-objective Scheduling Problem Dr. Sumeyye Samur
An Experimental Investigation of Optimized Bore/Stroke ratio of SI Engines - A Case Study Dr. Harish Kumar
An Image compression algorithm using Frequency division multiplexing Dr. Ahmed M. Alaa
An Instance of Failure for the MATLAB Explicit ODE45 Solver Dr. Riccardo Fazio
An Intelligent Face Recognition System using wavelet fusion of PCA, LDA Dr. Jyostna Devi B
AN INTELLIGENT IMAGE ANALYTICS MODULE FOR FACE RECOGNITION FROM ONE CAMERA Dr. Sangavi.S
An inverse micromechanical approach to predict the Young's modulus of carbon nanotube/polymer interphase Dr. A. Parsa
An Investigation into Dimensional Accuracy Achievable in Wire-cut Electrical Discharge Machining Dr. M. N. Islam
An Investigation into Protection Integrity of Distribution Transformers - A Case Study Dr. george eduful
An Iteration Process For Two Finite Families Of Mappings Dr. Safeer H Khan
An M/G/1 Retrial Queue with Negative Arrivals and Unreliable Server Dr. Amar Aissani
An Ontology Approach to Construction of Identification Subsystem for Intrusion Handling Systems in Wireless LANs Dr. Shahram Salek Zamankhani
An OOP w/ Java Course Using an Inductive Approach Dr. Duygu CAKIR
An Optimization Technique for the Full and Efficient Removal of Copper from Wastewater Dr. B. A. Olufemi
An Optimized Classification Model for Time-Interval Sequences Dr. C. Y. Tsai
Analysis of a Semi-trailer for Transportation of Vertically Positioned Hydrogen Cylinders: Safety Against Rollover Phenomenon Mr. Luis Tello
ANALYSIS OF DIFFERENT NACA 4 SERIES AIRFOILS Dr. S.Rajakumar
Analysis of Effective Parameters in Design of CNG Pressure Vessels Dr. I. Rostamsowlat
Analysis of Power and Forces in the Making of Long Tubes in Hard-to-Work Materials Dr. Sukhwinder Singh Jolly
Analysis of the Acceptable Deviation for the Measurement Process Established by the MSA and the VDA Manuals Dr. Sueli Fischer Beckert
Analysis of the Architecture and Mechanical Properties of Cancellous Bone Using 2D Voronoi Cell Based Models Dr. Rafael Schouwenaars
Analysis of the Sustainable Supply Chain Structure with Incomplete Preferences Dr. Gulcin Buyukozkan
Analytical and Experimental Investigation of a Tuned Undamped Dynamic Vibration Absorber in Torsion Dr. Patel Nikunjkumar G
Analytical Investigation of Peristaltic Transport of Power Law Fluid through a Tube Dr. H.Jalali Talab
Analytical Solution of Motion Differential Equation for Steady Plane-Couette Flow Under Pressure Gradient by Oldroyd-B Fluid Model Dr. Kazem Masoodi
Analytical Solution of Pressurized Rotating Composite Disk under Thermal Loading Mr. Armin Hadadian and Dr. Farough Mohammadi
Analytical Treatment of System of Linear and Nonlinear PDEs by Homotopy-Perturbation Method Dr. Md. Sazzad Hossien Chowdhury 
Analyzing of CPFR Supporting Factors in Retail Sector Dr. Gulcin Buyukozkan
Ant Colony Optimization for Buyer Coalition with Bundle of Items Dr. Anon Sukstrienwong
Application of Dynamic Voltage Restorers  in Low Voltage Distribution System for Voltage Swells Mitigation Dr. Rosli Omar 
Application of Genetic Algorithms to The Optimal Design of Vehicle's Driver-Seat Suspension Model Dr. wael mohamed 
Application of Lead Rubber Isolation Systems in the Offshore Structures Dr. HABIB SAEED MONIR
Application of Variable Metric Method Coupled with Adjoint Problem to Inverse Heat Conduction Problems Dr. Kourosh Amiraslani
Applying a Global Optimisation Algorithm to Fund of Hedge Funds Portfolio Optimisation Dr. Rishi Thapar
Applying a Two-Stage Simulated Annealing Algorithm for Shelf Space Allocation Problems Dr. C. Y. Tsai
Applying Harmony Search to the Bulky Waste Recycling Network Design Problem Dr. Mei-Shiang Chang
Approximate Earthquake Analysis for Regular Base Isolated Buildings Subjected to Near Fault Ground Motions Dr. LEBLOUBA Moussa
Approximate Solution for N-Diffusion Equations with Free Boundary Dr. Liancun Zheng
Artificial Neural Networks as Logical Software Module Test Oracle Dr. Seyed Reza Shahamiri
Asia's Largest Lignite Based Power Plant's Success Story: Efficient Removal of SO2 Through A Manmade Forest Canopy Professor S. Ghosh
Assessing the Number of Clusters From a Mixture of Von Mises-Fisher Mrs Wafia Parr Bouberima
Assessment of Entropy Based Method of Variable Choice in Cluster Analysis Dr.  Jerzy Korzeniewski
Asymptotic Expansion for Thermal Flow through a Pipe Dr. Eduard Marusic-Paloka and Dr. Sanja Marusic
Asymptotic Solutions and Estimations of Some Three-dimensional Problems for Bodies Weakened by Plane Crack Systems Prof. Boris Sobol
Auditory-based Subband Blind Source Separation using Sample-by-Sample and Infomax Algorithms Dr. Sid-Ahmed Selouani
Automated Monitoring System for Small Scale Dual-Tariff Solar PV plant in UiTM Pulau Pinang Dr. Nor Azlan Othman
AUTOMATIC DETECTION OF STEADY-STATE IN ON-LINE OPTIMIZATION Dr. M. Mansour
Automatic Incubator Control for a Poultry Farm Using Fuzzy Logic Controller Mr. Sukanto Mondal
Automatic Seamless Image Mosaicing: An Approach Based on Quad-tree Technique Dr.Ramesh Babu D R
Automation and Control Engineering Laboratory: Students Perspectives Dr. Celina Maria Godinho Silva Pinto Leao
Autonomous Underwater Vehicle Mr. Ammar Jilani
Balancing of Unbalanced Load and Power Factor Correction in Multi-phase (4-phase) Load Circuits using DSTATCOM Dr. Zakir Husain
Bandwidth/Fault tolerance/Contention Aware Application-Specific NoC Using PSO as a Mapping Generator Dr. Atena Roshan Fekr
Bidirectional Optical Flow Inter-Frame Technique for Ultrasound Video Enhancement Dr. Balza Achmad
Biharmonic Computation of the Flow Past an Impulsively Started Circular Cylinder at Re = 200 Dr. Jiten C Kalita
Binary Solution of Ax=b Dr. Subhendu Das
BIODIESEL FROM SEABUCKTHORN OIL Dr. s.s.varun shankar
Biomechanical Analyzes of Human Body Stability and Equilibrium Dr. Diana Cotoros
Bivariate Degradation Modeling Based on Gamma Process Dr. Zhengqiang Pan
Body Area Network (BAN) with OFDM Enhances Data Transmission in Wireless Health Monitoring Systems (WHMS) Dr. R.P. Chatterjee
Boiling Heat Transfer on the Outside of A Miniature Diameter Compact Tube Bundle Dr Ebenezer Adom
Business Performance Evaluation Model for the Taiwan Electronic Industry based on Factor Analysis and AHP Method Dr. W. Wen
Cam Mechanism Kinematic Analysis Used in a Human Ankle Prosthesis Structure Dr. Cristian COPILUSI
Capturing the Process Efficiency and Congestion of Supply Chains Mr. Mithun J Sharma
Carbon Emission Reduction in developing Countries: Feasibility of Household Heating and Cooling by PV Cells in N. Cyprus Dr. O.PHILLIPS AGBOOLA
CELL FORMATION WITH CELL LOAD VARIATIONS IN CELLULAR MANUFACTURING SYSTEM USING BACTERIA FORAGING ALGORITHM Dr. H. Nouri
Cetane Number and Thermal Properties of Croton Oil, Biodiesel, 1-Butanol, and Diesel Blends Dr. Makame Mbarawa
CFD Analysis of the Steady Flow across a Tapered Trapezoidal Cylinder Dr. Amit Dhiman
CFD Study of Flow Over Parallel Ridges with Varying Height and Spacing Dr. Salim M Salim
Chaotic Oscillations in a Hodgkin-Huxley Neuron - Quantifying Similarity Estimation of Neural Responses Mr. Mayur Sarangdhar
China Stock Market Regimes Prediction with Artificial Neural Network and Markov Regime Switching Dr David Liu
Chi-squared and Associations in Tabular Audiology Data Dr. Muhammad Naveed Anwar
Circular Microstrip Patch Antenna Strain Sensor for Wireless Structural Health Monitoring Mr. Ali Daliri
Clauses Representation Comparison in Neuro-Symbolic Integration Dr. Saratha Sathasivam
Cloud Data Storage for Group Collaborations Dr. Jyh-Shyan Lin
CLUSTERING OF CATEGORICAL DATA USING GEOMETRIC DATA TRANSFORMATION - PRIVACY PRESERVING Dr. Malathi Shankar
CNT-MOSFET Modeling based on Artificial Neural Network: Application to simulation of Nanoscale Circuits Dr. Er Subham Gandhi
Coevolution of Technical Trading Rules for High Frequency Trading Dr. Kamal Adamu
Colour Number Coding for Three-Dimensional Data Sets Dr. Johan Mohamad Sharif 
Common mode Voltage Reduction of Three-Level Inverter with Balanced Neutral Point Voltage Davood Mazhary
Communication in Technical Organizations: A Designed Experiment Approach Dr. Gana Natarajan
Compact Analytical Circuit Level modeling of MWCNT-based Interconnects for Future GSI CAD tools Dr. A. qodratnam
Comparative Analysis of Automatic Exudate Detection Algorithms Dr. Akara Sopharak
Comparative Study of Complexities of Breadth-First Search and Depth-First Search Algorithms using Software Complexity Measures Dr. Olabiyisi S. O.
Comparative Study of Low and High-Grade Crumb Rubber Processing Energy Dr. Tanto Pratondo UTOMO
Comparative Study of Rectifier Circuits For Motor Drives Applied to Aircraft Dr Hussein A
Comparative Study of Robust Controllers for Vibration Control of Flexible Structures by Combining Pre-Compressed Layer Damping and ACLD Treatment Dr  Rajiv Kumar
Comparing Ontology Development Tools Based on an Online Survey Dr. M. Rahamatullah Khondoker
Comparing the Behaviour of Drape Simulation Process with Real Life Layup Dr. Adegbola Taoreed Adesola
COMPARISON IN ABRASION RESISTANCE BETWEEN HARDENED 8620 STEEL AND COATED BY Ti/TiN Dr. Isaias Hilerio
Comparison of Dry and Flood Turning in Terms of Quality of Turned Parts M. N. Islam
Comparison of Proposed Six Stroke Internal Combustion Engine with Four Stroke Engine using Ideal cycle Mr. Amit Bhatia 
Computation of Mixed Electroosmotic/Pressure Driven Flow of Power-Law Fluids in Slit Microchannels Dr. Mohammad Hadigol
Computational Analysis of the Scavenging of a two-stroke Opposed Piston Diesel Engine Dr. Francisco Brojo
Computational Fluid Dynamics Modelling of Pipe-Soil Interaction in Current Dr. Ibiye Iyalla
Computer Aided Kinematic and Dynamic Analysis of Cam and Follower Dr. Vimal Patel
Computer Modeling and Control System for X-ray Radiometrical Well-Logging Unit Dr. A.K.Tuleshov
Computer-Aided Design Of Brakes Dr. John A. Akpobi
Conflict between Chainsaw Rigid and Vibration Acceleration based on Conversion Bridge Dr. HONG Huan-huan
Contribution to Incomplete and Noisy Information Problem Solving by Artificial Intelligence Principles Applying Dr. Stefania Gallova
Control and Integrability on SO (3) Dr. CC Remsing
Controlling Chaotic Forced Brusselator Chemical Reaction Mr. Ali Sanayei
Coordinated Control of Waste Water Treatment Process Prof. Magdi S Mahmoud
Correlation Between Aggregate Marks And Number of Seat Availability In Counseling Session Mr. D.Rajesh
Corrosion and Wear Behavior of ZrN Thin Films Dr. Jyoti V. Menghani
Corrosion Behaviour of Dissimilar A319 and A356 Cast Aluminum Alloys Joined By Friction Stir Welding (FSW) Dr. T. A. Khalifa
CRB and Maximum Likelihood Estimation of Passive Synthetic Array Dr. Baohua Sun
Criteria for Developing a System to Measure the Response to Stress Dr. Robinson Huamani Pumatanca
Curved Beams with Elastic Supports Transfer and Stiffness Matrices Dr. Lazaro Gimena
Customer Knowledge Co-creation Process in New Product Development Dr. Tanika D Sofianti
Data mining Aided Proficient Approach for Optimal Inventory Control in Supply Chain Management Mr. Chitriki Thotappa 
Deformation Evaluation of Embedded Antennas in Vehicular Components Dr. Sabu John
Design and Analysis of a Class D Amplifier with high-efficiency and low-distortion Dr. Krit Salahddine
Design and development of an efficient power factor controller software and hardware using PIC 18f452 Dr. Yaduvir Singh
DESIGN AND FABRICATION OF A MINIATURE AUTONOMOUS UNDERWATER VEHICLE (MAUV) Dr. Mansour Ataei
Design and Implementation of Airline Reservation Web Services Using Service-oriented Architecture Dr. Fang-Fang Chua
Design and Implementation of Artificially Intelligent Microcontroller based Chess Opponent Dr. Gurjit kaur
Design and Implementation of the Expert System for Balancing Team Formation on the Basis of Belbin Team Role Dr. S.Fatahi
Design and Optimization of Cages for the Transport of Hydrogen Cylinders Dr. Ramon Miralbes
DESIGN LQG/LTR CONTROLLER FOR DECREASING VIBRATIONS IN THIN AND THICK PLATES BY THE FINITE ELEMET MODEL USING HETEROSIS ELEMENT AND COMPARISON OF LAGRANGE AND HETEROSIS ELEMENTS Dr. mahmood alfooneh
Design of a high fill-factor micromachined bolometer for thermal imaging applications Dr. mohammed mousa
Design of a Learning Environment for Embedded System Dr. Antonio Espirito Santo
Design of a Target Tracking Guidance System for an Autonomous Underwater Vehicle Dr. Mansour Ataei
Design of an Electrophysiological Signal Acquisition System: A Technological Aid for Research, Teaching and Clinical Application Dr. Emilo Alexander Villavicencio Chamorro
Design of an Integrated Active Front Steering and Active Rear Differential Controller using Fuzzy Logic Control Mr. Mohammad Behroozi
Design Optimization of a Cost-Effective Micro Wind Turbine Dr. Dennis Leung
DESIGN OPTIMIZATION OF CUTTING PARAMETERS FOR TURNING OPERATIONS BASED ON THE TAGUCHI METHOD Dr. ARVIND JAYANT
Design, Finite Element Analysis and Optimization of HRC Trays used in Heat Treatment Process Mr. Dinkar Nandwana
Detecting & Locating Leaks in Water Distribution Polyethylene Pipes Dr Maninder Pal
Detection of Denial of Service Attacks against Domain Name System Using Machine Learning Classifiers Dr. M. IQBAL SARIPAN
Determination of Non-uniform Residual Stresses in Laminated Composite Materials Dr. Ahmad R. Ghasemi
Developing Slip-Flow and Heat Transfer in Annular Microchannels with Constant Heat Flux Dr. Hossein Shokouhmand
Development of a New Optimal Method for Solution of Transportation Problems Dr. Chandra Putcha
Development of a Numerical Technique for Bus Rollover Test Simulation by the F.E.M. Dr. David Valladares Hernando
Development of an Innovative Fatigue Tests Profile for Three Axle Semi-trailers Mr. Luis Tello
Development of Computer Program to Estimate the Performance of the Hydraulic Brake System for Automotives Dr. Won Sun Chung
Digital Forensic Investigation model in Indian Scenario Dr. Amit Sharma
Digital Signal Processing for the Detection and Location of Acoustic and Electric Signals from Partial Discharges Dr. Jesus Rubio
Direct Deposition of a Crystallized Si Thin Film on a YSZ/Glass Substrate at 430 Degree Celsius Dr. Sukreen Hana
Direct-Search Penalty/Barrier Methods Dr. Aldina Correia
Discount Pricing Model to Coordinate a Supply Chain under Stochastic Demand Environment Dr S P Sarmah
Discovery of Approximate Functional Dependencies: An Efficient Approach to Mining Minimal Dependencies Dr. S.M. Fakhrahmad
Dispersal Curves for Optimal Collision Avoidance in a Close Proximity Encounter: a Case of Participants with Unequal Turn Rates Dr. Tanya Tarnopolskaya
Distributed Memory Implementation of the False Nearest Neighbors Method: Kd-tree approach versus Box-assisted approach Dr. Enrique Arias
Distribution Planning in Supply Chain Management Dr. T. Radha Ramanan
Dynamic  Routing In An  Mb/M/I Queuing System Dr. pradeep k. joshi
Dynamic Analysis Program Development for a Wiper Linkage Dr. Wook Hyeon Kim
Dynamic Answer and Experimental Research concerning the Mechanisms of Mowers Machine Dr. Ionut Geonea
Dynamic Fuzzy String-Matching Model for Information Retrieval Based on Incongruous User Queries Dr. Olufade F. W. ONIFADE
Dynamic Response of an Electro-rheological Sandwich Beam with different Elastic Layers Subjected to Simultaneous Impact Loads Dr. M. Sepehri Noor
Dynamics of Machine-automaton Jointly with Cyclegram Dr. JOMARTOV  Assylbek
Dynamics of Nonlinear Beam on Elastic Foundation Dr. Salih N Akour
Dynamics of Transtropic Elastic Continuums with Non-Homogeneities Dr. Lyazzat Atymtayeva