The 2011 International Conference of Applied and Engineering Mathematics ( ICAEM ) | |
ICAEM I [ Day One ( 9:15 - 10:45 ) at Seminar Room D ] |
Session Chair: Prof. Ignacio Porras |
| Behavior of Axial Dual-spin Spacecraft |
| Prof. Vladimir Aslanov |
| A Generalized Stochastic Model for Number of Events in Equilibrium Renewal Process (ERP) |
| Prof. V. K. SINGH |
| Multicriteria Sustainability Evaluation of Transport Networks for Selected European Countries |
| Prof. Orhan Feyzioglu, and Mr. Orhan Ilker Kolak |
| Robust Cross-Layer Network Optimization for Diverse QoS Requirements: Work in Progress |
| Dr. Vladimir Marbukh |
| Maximizing Power Generation in Chemical Systems and Fuel Cells |
| Prof. Stanislaw Sieniutycz |
ICAEM II [ Day One ( 12:15 - 13:00 ) at Seminar Room A ] |
Session Chair: Prof. Abdul Rahim Khan |
| Combined Eigenfunction Expansion and Convergence Accelerator Approach to the Rapid Numerical Evaluation of Hilbert Transforms |
| Prof. Ignacio Porras |
| Spatial Disorder of Soliton Solutions for 2D Nonlinear Schrodinger Lattices |
| Dr. Shih-Feng Shieh |
| Inclusions Between the Spaces of Strongly Almost Convergent Sequences Defined by An Orlicz Function in A Seminormed Space |
| Dr. VINOD KUMAR BHARDWAJ |
ICAEM III [ Day One ( 14:00 - 15:30 ) at Seminar Room A ] |
Session Chair: Prof. M.Manuela Rodrigues |
| Distribution of Terminal Cost Functional in Discrete-Time Controlled System with Noise-Corrupted State Information |
| Prof. Vladimir Turetsky |
| Reliability Measures in Circulant Network |
| Mr. Ramanathan Sundara Rajan |
| On the Heat Conduction in Natural Porous and Anisotropic Materials |
| Dr. Adam Marlewski |
| Enhanced Advancing Front Technique with Extension Cases for Initial Triangular Mesh Generation |
| Mrs. Zuraida Abal Abas |
| Random Ishikawa Iteration Scheme of Two Random Operators |
| Prof. Abdul Rahim Khan |
ICAEM IV [ Day One ( 16:00 - 18:00 ) at Seminar Room A ] |
Session Chair: Prof. Vladimir Turetsky |
| Gradient-based Sharpness Function |
| Mrs. Maria E. Rudnaya |
| Determining the Inventory Policy for Slow-Moving Items: A Case Study |
| Dr. UMAY ZEYNEP UZUNOGLU Kocer |
| Enumeration of a Class of Cyclic Number Fields of Degree 10 |
| Dr. Schehrazad SELMANE |
| On the Nonlinear Estimation of GARCH Models Using an Extended Kalman Filter |
| Dr. SEBASTIAN OSSANDON |
| Study of Solutions of a Nonlinear Fractional Partial Differential Equation |
| Prof. M.Manuela Rodrigues |
| On Fuzzy *mu - Irresolute Maps and Fuzzy *mu -Homeomorphism Mappings in Fuzzy Topological Spaces |
| Dr. Sadanand Patil |
| Mixed Block Multistep Method for Solving Second-Order Differential Equations |
| Dr. Zarina Bibi Ibrahim |
| Numerical solution by Partitioning differential systems modelling a Tumor-immnune interaction |
| Dr. Khairil Iskandar Othman |
| Analytical and Numerical Solution for Collapse Load in Oil Pipelines under Compressive Load |
| Mr. RAMON SILVA |
ICAEM V [ Day Two ( 14:00 - 15:30 ) at Seminar Room H ] |
Session Chair: Prof. Raffaello Seri |
| Solution of a Singular BVP of Reaction-diffusion in a Biocatalyst by OHAM |
| Prof. Surendra Kumar |
| Reduced Differential Transform Method for Solving Klein Gordon Equations |
| Dr. Galip Oturanc |
| Nonparametric Identification of the Production Functions |
| Prof. Gennady Koshkin |
| Artificial Neural Network Modeling & Standardization of HPTLC Method for the Estimation of Cholesterol in Edible Oils |
| Dr. JYOTI KUMAR ARORA |
| A Web-based Tool to Evaluate the Iterative Processes of Direct Search Methods |
| Prof. Pedro Mestre |
| Discriminant Functions for Multidimensional Normal Distribution |
| Dr. Iuliana Iatan |
ICAEM VI [ Day Two ( 16:00 - 18:00 ) at Seminar Room H ] |
| Fixed Points of Quasi-Contractive Type Operators in Normed Spaces by a Three-step Iteration Process |
| Dr. Safeer Khan |
| State Feedback Based Linear Slip Control Formulation for Vehicular Antilock Braking System |
| Mr. Otis Tichatonga Nyandoro |
| Differentials of Eigenvalues and Eigenvectors in Undamped Discrete Systems under Alternative Normalizations |
| Prof. Raffaello Seri |
| Mathematical Modelling of Bubble Nucleation in Stout Beers and Experimental Verification |
| Mr. Michael Devereux |
| Fuzzy TOPSIS Method in the Selection of Investment Boards by Incorporating Operational Risks |
| Mrs. ELISSA NADIA MADI |
| Uncertainty in a Mixed Duopoly with Quadratic Costs |
| Prof. Fernanda Ferreira |
| Searching Most Likely DNA Sequence Using HMM |
| Dr. Shivakumar Madagi |
ICAEM VII [ Day Three ( 9:00 - 10:45 ) at Seminar Room H ] |
Session Chair: Prof. Luis Antonio Fernandes de Oliveira |
| First Order Method for Optimal Control using Parmetric Optimization |
| Mr. Amr Radwan |
| Computational Modelling on the Contact Interface with Boundary-layer Approach |
| Prof. Lei Hou |
| On Riemann-Liouville and Caputo Impulsive Fractional Calculus |
| Dr. Manuel de la Sen |
| On Partial Fraction Decomposition of Rational Functions with Irreducible Quadratic Factors in the Denominators |
| Dr. Yiu-Kwong MAN |
| Three-fluid System Short-wave Instability and Gap-solitons |
| Dr. Paul Christodoulides, and Dr. Chrystalla Demetriades |
| Optimization of Prediction Intervals for Order Statistics Based on Censored Data |
| Prof. Nicholas A. Nechval |
| A Better Approximation to the Solution of Burger-Fisher Equation |
| Dr. AYDIN KURNAZ |
ICAEM VIII [ Day Three ( 11:15 - 13:00 ) at Seminar Room H ] |
Session Chair: Dr. Paul Christodoulides |
| Generalization of the Takacs' Formula for GI/M/n/0 Queuing System with Heterogeneous Servers |
| Mr. HANIFI OKAN ISGUDER |
| Regulated Functions with values in the Banach Algebra of Quaternions |
| Prof. Luis Antonio Fernandes de Oliveira |
| Semi-infinite Model of Emissions Limits of Firms in the Areas with Mixture Landscapes |
| Dr. Alina Fedossova |
| Unsteady MHD Laminar Boundary Layer Flow due to an Impulsively Stretching Surface |
| Dr. ESWARA A.T. |
| On the Pagerank Algorithm for the Articles Ranking |
| Mr. Hakim HARIK |
ICAEM IX [ Day Three ( 14:00 - 15:30 ) at Seminar Room H ] |
Session Chair: Dr. Novriana Sumarti |
| Common Solution of Nonlinear Functional Equations via Iterations |
| Dr. Arshad Muhammad |
| Maximum-revenue Tariff with Different Roles in a Price-setting Competition |
| Prof. Flavio Ferreira |
| Efficiency of the Strain Based Approach Compared to the Displacement Formulation for the Analysis of Structures |
| Dr. Djamal HAMADI |
| A General Approach to the Formulae Used in the Conjugate Directions Method for Solving Linear Systems of Algebraic Equations |
| Prof. Andrei Nicolaide |
| An Embedded Analysis Method for Complexities of Problems |
| Dr. Daxin Zhu |
| On Solvability of the Nonlinear Optimal Control Problem for Processes Described by the Semi-linear Parabolic Equations |
| Prof. Akylbek Kerimbekov, and Ms. Nurjan Sartbekova |
ICAEM X [ Day Three ( 16:00 - 18:00 ) at Seminar Room H ] |
Session Chair: Dr. Arshad Muhammad |
| A Risk Model on the Weekend's Returns of the U.S. Movie Industry |
| Dr. Novriana Sumarti |
| Control and Stability on the Euclidean Group SE (2) |
| Dr. Claudiu Remsing |
| Analysis of Least Stable Mode of Buoyancy Assisted Mixed Convective Flow in Vertical Pipe Filled with Porous Medium |
| Dr. Premananda Bera |
| Numerical Solution of Sine-Gordon Equation by Reduced Differential Transform Method |
| Dr. Yildiray Keskin |
| A Study of Numerical Modeling of Heat Transfer in Wall-Adjacent Turbulent Flows |
| Dr. ARUP BORAH |
| On Adjacency Matrix of One Type of Graph and Pell Numbers |
| Mr. Fatih Yilmaz |
| On Dynamic Cumulative Residual Inaccuracy Measure |
| Prof. H.C. TANEJA |
Poster Session |
| Further Results on the Game of Cutblock |
| Dr. Alessandro Cincotti |
| Imbibition Phenomenon arising in Double Phase Flow through Porous Medium with Capillary Pressure |
| Dr. Ramakanta Meher |
| Symplectic Numerical Methods for a Linear Stochastic Oscillator with Two Additive Noises |
| Dr. Lijin Wang |
| Solving Heat Equation by the Adomian Decomposition Method |
| Dr. Ahmed Cheniguel |
| Application of the General Variational Iteration Method to a Nonlinear System |
| Dr. Amir Lotfavar |
The 2011 International Conference of Electrical and Electronics Engineering ( ICEEE ) | |
ICEEE I [ Day One ( 11:15 - 13:00 ) at Seminar Room B ] |
Session Chair: Ms. Nina Korlina Madzhi |
| Robust and Intelligent Control Methods to Improve the Performance of a Unified Power Flow Controller |
| Dr. Chellali Benachaiba |
| Comparison by Simulation of Various Strategies of Three Level Induction Motor Torque Control Schemes for Electrical Vehicle Application |
| Dr. LAMIA YOUB |
| Simulation and Design of Broad-Band Slot Antenna for Wireless Applications |
| Prof. Amar Partap Singh Pharwaha |
| External Memory System Optimization for FPGABasedImplementation of Speech Signal Processing |
| Dr. Jakkree Srinonchat |
| Detection of Rotor Bar Faults by Using Stator Current Envelope |
| Dr. Osman Bilgin |
| Designing Vivaldi Antenna with Various Sizes using CST Software |
| Miss Norhayati Hamzah |
| Calculation of Optical Parameters of Titanium Nano-layers with Different Deposition Angles |
| Mrs. Haleh Kangarlou |
ICEEE II [ Day One ( 14:00 - 15:45 ) at Seminar Room B ] |
Session Chair: Dr. Osman Bilgin, and Dr. LAMIA YOUB |
| All Digital Time-to-Digital Converter with High Resolution and Wide Detect Range |
| Prof. Hong-Yi Huang |
| Measuring the Quality Indicators of the Electric Energy Service |
| Prof. Cesar Augusto Hernandez Suarez |
| Grounding Electrode Calculations Using the Matrix Method |
| Mr. Antonio Martins |
| Alternative Electric Energy Source Selection in Construction Projects: A Case Study in Turkey |
| Mr. Farrokh Rostami Kia |
| Interfacial Reactions between the Sn-9Zn Solder and Au/Ni/SUS304 Multi-layer Substrate |
| Prof. Yee-wen Yen |
ICEEE III [ Day Two ( 11:15 - 13:00 ) at Seminar Room B ] |
Session Chair: Prof. Yan-Fei Liu |
| A Remote Microprocessor-Based Monitoring and Control System via Internet in Case Study of Pet Care |
| Prof. Hsiung Lin |
| Design and Simulation of Diminished-One Modulo 2n+1 Adder Using Circular Carry Selection |
| Dr. RAM AWADH MISHRA |
| An Adaptive Radar Design for Small Satellite Missions |
| Mr. Sunday Ekpo |
| Energy Function Analysis of a Single-Machine Infinite-Bus Power System |
| Dr. Yilmaz Uyaroglu |
| Diaphragm Design for MEMS Pressure Sensors using a Data Mining Tool |
| Dr. Andhe Dharani |
| Solar Tracker of Two Degrees of Freedom for Photovoltaic Solar Cell Using Fuzzy Logic |
| Prof. GUSTAVO OZUNA |
| Design of Switching Control Systems Using Control Performance Assessment Index |
| Miss Shabnam Armaghan |
ICEEE IV [ Day Two ( 14:00 - 15:30 ) at Seminar Room B ] |
Session Chair: Prof. Lucian Mandache |
| Design of an UWB Quasi Rhomboid Shaped Element Bowtie Antenna for MIMO Applications |
| Dr. Chanchai Thongsopa |
| Robust Actuator Fault Detection and Isolation in a Multi-Area Interconnected Power System |
| Dr. Fikret Caliskan |
| Preparation of MnOX Nano-supercapacitor with Silver Addition by Electrochemical Deposition |
| Prof. Yi Hu |
| Energy Saving in DC/AC Drive Compressors & Pumps Using ZCTF PWM Inverter: A Study |
| Mr. Saeed Jahdi |
| Fuzzy Logic Control for DVR to Counter Voltage Sag on a Distribution Network |
| Mrs. Puneet Chawla |
| Resource Efficient Design and Implementation of Standard and Truncated Multipliers using FPGAs |
| Dr. Muhammad Rais |
ICEEE V [ Day Two ( 16:00 - 18:00 ) at Seminar Room B ] |
Session Chair: Dr. RAM AWADH MISHRA |
| Harmonics and Interharmonics Measurement using Group-harmonic Power Minimizing Algorithm |
| Prof. Hsiung Lin |
| Digital Control for Dynamic Performance Enhancement of DC-DC Switching Converters |
| Prof. Yan-Fei Liu |
| An Efficient Hybrid Neuro-fuzzy Control Scheme of Synchronous Generator: A Case Study |
| Mrs. Gagandeep Kaur |
| Hysteresis Modeling in a Piezoelectric Nanopositioner Stage |
| Dr. Ahmed Telba |
| Accurate Time-Domain Simulation of Nonlinear Inductors Including Hysteresis and Eddy-Current Effects |
| Prof. Lucian Mandache |
| Tomography Analysis of Compacted Soil Using Electrical Conductivity |
| Prof. Zamri Chik |
| Study the Influence of Thermal Oxidation on the Structures of Titanium Very Thin Layers |
| Mr. Saeid Rafizadeh |
ICEEE VI [ Day Three ( 11:15 - 13:00 ) at Seminar Room B ] |
Session Chair: Dr. Raheel Shah |
| Optimal Placement of Wind Farm on the Power System Using Multiobjective Bees Algorithm |
| Mr. Prakornchai Phonrattanasak |
| Resistance Switching Properties in Cu/Cu-SiO2/TaN Device |
| Prof. Bohr-Ran Huang, and Prof. Shyankay Jou |
| Deposition of Doped TiO2 Thin Film by Sol Gel Technique and its Characterization: A Review |
| Mr. A M Gaur |
| Modeling and Control of the PFC Stage for a 50KW EV Fast Battery Charger |
| Dr. Alon Kuperman |
ICEEE VII [ Day Three ( 14:00 - 15:30 ) at Seminar Room B ] |
Session Chair: Mr. A M Gaur |
| Analysis of a Comb Type Microactuator Used in Micro Thermal Switches |
| Dr. Promod K. Patowari |
| Modeling of BLDC Motor with Ideal Back-EMF for Automotive Applications |
| Mr. Alireza Tashakori Abkenar |
| Current Component Index Algorithm for Voltage Sag Source Localization |
| Dr. Noraliza Hamzah |
| Temperature Dependent Mobility in Strained Graphene |
| Dr. Raheel Shah |
| Embedding a Low Power Test Set for Deterministic BIST using a Gray Counter |
| Dr. Santanu Chattopadhyay |
| Optical Properties of Four Phase Systems |
| Mr. Saeid Rafizadeh |
ICEEE VIII [ Day One ( 9:15 - 10:45 ) at Seminar Room B ] |
Session Chair: Prof. Amar Partap Singh Pharwaha |
| Design Simulation and Analysis of Polysilicon-based CMOS Micromachined Piezoresistive Microcantilever for Glucose Sensing |
| Ms. Nina Korlina Madzhi |
| Q-Factor Evaluation of Spiral Inductor for 5.8GHz WiMAX Application |
| Ms. Kama Azura Othman |
| A Hybrid Gas Sensor based on Infrared Absorption for Indoor Air Quality Monitoring |
| Miss Marianah Masrie |
Poster Session |
| Growth of Carbon Nanotube Using Microwave Plasma Chemical Vapor Deposition and Its Application to Thermal Dissipation of High-Brightness Light Emitting Diode |
| Prof. Kwang-Jow Gan |
| Design and Implementation of 8-Bit Read-Write Memory Using FIFO Algorithm |
| Prof. Ranjan Chakraborty |
| Teaching Control System Principles Using Remote Laboratories over the Internet |
| Dr. Lutfi Al-Sharif |
| Proposal for Low Cost GSM based Electric Meter for Efficient and Automated Meter Reading for Developing Countries |
| Mr. Muhammad Saadi |
The 2011 International Conference of Mechanical Engineering ( ICME ) | |
ICME I [ Day One ( 10:15 - 10:55 ) at Seminar Room A ] |
Session Chair: Dr. FRANCESCO RIPAMONTI |
| Contribution of Brownian Motion in Thermal Conductivity of Nanofluids |
| Dr. S M Sohel Murshed |
| Buckling Analysis of Nonuniform Nanowires under Axial Compression |
| Prof. Haw-Long LEE |
ICME II [ Day One ( 11:15 - 13:00 ) at Seminar Room D ] |
Session Chair: Dr. Vipul Ranatunga |
| The Active Modal Tuned Mass Damper (AMTMD) for Vibration Suppression in Flexible Structures |
| Dr. FRANCESCO RIPAMONTI |
| Study on Energy Consumption in Turning Motion of Hexapod Walking Robots |
| Mr. Shibendu Shekhar Roy |
| Study Velocities Distribution of Unsteady Turbulent Flows in an Open Channel |
| Miss Farida Merrouchi |
| The Truck Mounted Concrete Boom Pump: A Dynamic Numerical Model |
| Dr. GABRIELE CAZZULANI |
| Design of a Switching PID Controller for a Magnetically Actuated Mass Spring Damper |
| Miss Shabnam Armaghan |
ICME III [ Day One ( 11:15 - 13:00 ) at Seminar Room E ] |
Session Chair: Prof. Akram Muhammad |
| Model Reduction for a Variable Geometry Fluid Thermal Problem |
| Mr. Elliott Bache |
| Development of Energy Efficient R-134a Automotive Air Conditioning System Using Internal Heat Exchanger |
| Prof. Shivalingalingappa N. Sapali |
| Performance and Modeling of a Direct Methanol Fuel Cell |
| Dr. S. O. Bade Shrestha |
| Acoustic Emission based Tool Condition Monitoring System in Drilling |
| Dr. KARALI PATRA |
| Multi-Objective Optimization Of Cyclogram Mechanisms Machine-Automaton |
| Dr. Assylbek Jomartov |
| A Portable Gait Monitoring System for Lower Limb Prosthetic Alignment |
| Mr. Kian Sek Tee |
ICME IV [ Day One ( 14:00 - 15:30 ) at Seminar Room D ] |
Session Chair: Dr. Julaluk Carmai |
| Modeling and Identification of Building's Construction Defects |
| Dr. Kazimieras Petkevicius |
| Studies on Increasing Conductivity of Polyurethane Films and Nanofibers |
| Prof. Hale Karakas |
| Efficient Technique of Air-Conditioning |
| Dr. Sanjeev Suryawanshi |
| Finite Element Modeling of Delamination Crack Propagation in Laminated Composites |
| Dr. Vipul Ranatunga |
| Studies on Delaminating Effects on Stress Development in Composite Structures |
| Dr. Mohamed Haneef |
ICME V [ Day One ( 14:00 - 15:30 ) at Seminar Room E ] |
Session Chair: Dr. ALFAYO ANYIKA Alugongo |
| About the Simulation of Stochastically Excited Elastic Systems and Their Stability |
| Mr. Vadim Potapov |
| Shape Optimization of Electrostatically Actuated Micro Cantilever Beam with Extended Travel Range Using Simulated Annealing |
| Dr. Dnyanesh Pawaskar |
| Use of Cold Air Velocity Test (CAVT) to Locate Erosion Prone Zones in Pulverized Coal Fired Utility Boiler |
| Mr. PRADYUMNA DHAMANGAONKAR |
| Experimental Investigation of Convective Heat Transfer Coefficient of CNTs Nanofluid under Constant Heat Flux |
| Miss Nastaran Mosavari Nezamabad |
| A Balance for Measurement of Yaw, Lift and Drag on a Model in a Hypersonic Shock Tunnel |
| Mr. Sharad Trivedi, and Prof. Viren Menezes |
| Statistical Linear Dynamic Control of Automatic Devices |
| Prof. Akram Muhammad |
ICME VI [ Day One ( 16:00 - 18:00 ) at Seminar Room D ] |
Session Chair: Mr. PRADYUMNA DHAMANGAONKAR |
| Testing of the Shear Strength of Compressed Material at Increased Temperature |
| Dr. Krzysztof Talaska |
| Finite Element Modelling of Titanium Foam Behaviour for Dental Application |
| Dr. Julaluk Carmai |
| CFD Analysis of Multi-jet Air Impingement on Flat Plate |
| Prof. Nagesh Chougule |
| Contact Force Optimization For Stable Grasp Of Multifingire Robotic Grippers |
| Dr. MOHD SUHAIB |
| Triaxial Accelerometer Static Calibration |
| Mr. Kian Sek Tee |
| Effect of Interfacial Contact Forces in Lateral Contact Wire Strand |
| Prof. GNANAVEL KANNAIYAN B |
| A New Non-traditional Machining Method Using Cavitation Process |
| Mr. Mehdi Hadi |
ICME VII [ Day One ( 16:00 - 18:00 ) at Seminar Room E ] |
Session Chair: Dr. S. O. Bade Shrestha |
| Design of a Hip Joint Simulator According to the ISO 14242 |
| Dr. Nikolaos Galanis |
| Experimental Investigation of the Effect of Esterified Karanja Oil Biodiesel on Performance, Emission and Engine Wear of a Military 160hp Turbocharged CIDI Engine |
| Dr. Milankumar Nandgaonkar |
| Multimodal Problems, Premature Convergence versus Computation Effort in Dynamic Design Optimization |
| Dr. ALFAYO ANYIKA Alugongo |
| Design of Size Flexible and Leak Preventing Hydrobushing |
| Dr. Min Lu |
| Squareness Evaluation using Computational Geometric Approach |
| Dr. NASINA VENKAIAH |
| From Beam to Chassis: How to Increase NVH Performances with an Optimized Moment of Inertia Distribution |
| Mr. Enrico Torricelli, and Mr. Luca D'Agostino |
ICME VIII [ Day Two ( 9:00 - 10:45 ) at Seminar Room D ] |
Session Chair: Dr. Abanti Sahoo |
| Three Dimensional Numerical Analysis of Conjugate Heat Transfer for Enhancement of Thermal Performance using Finned Tubes in an Economical Unglazed Solar Flat Plate Collector |
| Mr. Manjunath M.S |
| Solar Operated Multiple Granulated Pesticide Duster |
| Mr. Abhishek Jivrag |
| Individual-Based Model to Simulate Crowd Dynamics Using Artificial Potential Fields |
| Dr. Mohamed Mabrouk |
| Comparative Approaches of Calculation of the Back Water Curves in a Trapezoidal Channel with Weak Slope |
| Mr. Rachid Chiremsel |
| Parametric Optimization in WEDM of WC-Co Composite by Neuro-Genetic Technique |
| Dr. Probir Saha |
ICME IX [ Day Two ( 11:15 - 13:00 ) at Seminar Room D ] |
Session Chair: Mr. Jacek Kroczak |
| Mathematical Modelling for Hydrodynamic Studies of Spouted Bed |
| Dr. Abanti Sahoo |
| Experimental Identification of Convective Heat Transfer in Machine Tools |
| Mr. Peter Kohut |
| Limitations of Numerical Methods in Analysis of Contact Stresses of Joints in Mechanical Engineering |
| Prof. Marian Dudziak |
| Numerical Simulation of a Solar Flat Plate Collector using Discrete Transfer Radiation Model (DTRM) - A CFD Approach |
| Dr. VASUDEVA KARANTH |
| Linear Identification of a Steam Generation Plant |
| Prof. Magdi S. Mahmoud |
| Influence of Proportion of Abrasive Particles in conveyor Liquid on Ultrasonic Cavitation Machining Process |
| Mr. Mehdi Hadi |
ICME X [ Day Two ( 11:15 - 13:00 ) at Seminar Room E ] |
Session Chair: x |
| Effect of Orientation on Elastic-plastic Fracture Toughness of Cortical Bone |
| Mr. Nitin Kumar Sharma |
| Robust Springback Optimisation of DP600 Steels for U-Channel Forming |
| Prof. Erdem Acar |
| Simple Approach for Determination of Optimum Gradation Considering the Combined Index and Angularity Number of Stone Aggregates |
| Dr. MOHAMED ANJUM |
| Shock-free Race Track of Road Roller Vibration Exciters |
| Prof. Yerbol Temirbekov |
| An Application of the IMSC on a Non-linear Flexible Structure: Numerical Analysis and Experimental Validation |
| Dr. GABRIELE CAZZULANI |
| Hydrogen Fuel Cell Design and Manufacturing Process Used for Public Transportation in Mexico City |
| Prof. Beatriz Romero Angeles |
ICME XI [ Day Two ( 14:00 - 15:30 ) at Seminar Room D ] |
Session Chair: Dr. Ireneusz Malujda |
| Flow Control of a Hydraulic Headbox of Papermaking Machines |
| Prof. Masaru SUMIDA |
| Multicriteria Parametric Identification of a Mathematical Model of Metal Cutting Machine's Main Drive |
| Prof. Yuliyan Angelov |
| Analysis of a Three Layered Straight Wire Rope Strand Using Finite Element Method |
| Dr. Shibu Gopalakrishnan |
| Optimization Methodology for an Automotive Hood Substructure (Inner Panel) |
| Mr. Dario Costi, and Mr. Luca Splendi |
| Feasibility Study of Using TiCN and CrN Thin Film Coatings to Enhance Lifetime of Grippers Used in Hard Disk Drive Assembly Line |
| Dr. Sasithon Bland |
| A Computational Conjugate Thermal Analysis of HP Stage Turbine Blade Cooling with Innovative Cooling Passage Geometries |
| Dr. Yagnesh Sharma |
ICME XII [ Day Two ( 14:00 - 15:30 ) at Seminar Room E ] |
| Effect of Alumina Platelet Reinforcement on Dynamic Mechanical Properties of Epoxy |
| Dr. Dharmendra Kumar Shukla |
| Analysis Of Tire-road Contact Under Winter Conditions |
| Dr. Konrad Walus |
| Manufacturing of Long Thin Wall Tubes of Small Bore with Titanium |
| Dr. Sukhwinder Jolly |
| Biodiesel Oil Derived from Biomass Solid Waste |
| Dr. Mohamed Y. E. Selim |
ICME XIII [ Day Two ( 16:00 - 18:00 ) at Seminar Room D ] |
Session Chair: Dr. Mohamed Mabrouk |
| Numerical Analysis of Flow through Abrasive Water Suspension Jet: The Effect of Inlet Pressure on Wall Shear and Jet Exit Kinetic Energy |
| Mr. Deepak D |
| Thermal Convection of a Water-Based Nanofluid in an Enclosure with an Oscillating Wall |
| Dr. Murat Aktas |
| Experimental Testing of the Strength of Wood Subjected to Higher Temperature and Moisture Conditions - Tension |
| Dr. Ireneusz Malujda |
| Microscopic Analysis of Breakage in Materials for Hard Implants |
| Prof. Diana Cotoros |
| An Innovative Design of Solar based Building to Get Optimum Illumination and Create Better Living Environment with the Usage of Zero Electricity |
| Prof. MAHENDRAKUMAR MAISURIA |
| Large Deflection Analysis of Clamped Circular Plates |
| Dr. Murat Altekin |
| Numerical Simulation of Thermal Barrier Coating System under Thermo-mechanical Loadings |
| Prof. G. Hossein Farrahi |
ICME XIV [ Day Two ( 16:00 - 18:00 ) at Seminar Room E ] |
Session Chair: Prof. Erdem Acar |
| Tolerance Analysis of Involute Splines |
| Mr. Jacek Kroczak |
| Power Flows and Torque Analyses of an Independently Controllable Transmission with a Parallel Type |
| Dr. Guan-Shyong Hwang |
| Pure Bending Determination of Stress-Strain Curves for an Aluminum Alloy |
| Prof. Beatriz Romero Angeles |
| Measurement of Crushing Strength of Coal Agglomerates |
| Mr. KINGSLEY OKECHUKWU IKEBUDU |
| Statistical Approach for Tapered Bearing Fault Detection using Different Methods |
| Mr. Sylvester Aye |
ICME XV [ Day Three ( 10:00 - 10:45 ) at Seminar Room A ] |
Session Chair: Dr. Murat Aktas |
| Computationally Efficient Calculation of Aerodynamic Flows |
| Dr. Diego Alonso |
| Numerical Analysis into the Effects of the Unsteady Flow in an Automotive Hydrodynamic Torque Converter |
| Mr. Pablo De la Fuente, and Dr. Marek Wozniak |
ICME XVI [ Day Three ( 11:15 - 13:00 ) at Seminar Room C ] |
| A New Knee Prosthesis Design Based on Human Lower Limb Cinematic Analysis |
| Dr. Copilusi Petre Cristian |
| Heat Transfer Simulation by CFD from Fins of an Air Cooled Motorcycle Engine under Varying Climatic Conditions |
| Mr. PULKIT AGARWAL |
| Modeling and Simulation Methodology Techniques for Advanced Low Power Communication Circuits |
| Dr. KRIT Salah-ddine |
| Designing of Sixlink Mechanism Schemes with the Changeable Contour Taking into Account Forces Transfer |
| Dr. Yerbol Temirbekov |
| Determination of Residual Stresses Originated in a Die Process Using the Crack Compliance Method |
| Prof. Beatriz Romero Angeles |
| Numerical Simulation of Induction Hardening of Torsion Bar |
| Prof. G. Hossein Farrahi |
ICME XVII [ Day Three ( 11:15 - 13:00 ) at Seminar Room D ] |
Session Chair: Dr. Grzegorz Domek |
| Aerostatic Spherical Bearing for Mass Properties Machine (MPM) |
| Mr. ARUN KUMAR SAMPATH |
| An Optimization Method for an Aircraft Rear-end Conceptual Design Based on Surrogate Models |
| Mr. Sergio de Lucas |
| Second Law Approach for Turbulent Flow in an Annular Duct Partly Filled with a Porous Substrate |
| Dr. Nadia Allouache |
| Analysis of Bending Specific Deformation in Composite Materials Using Comparative Methods |
| Prof. Diana Cotoros |
| Flame Radiation Characteristics of Open Hydrocarbon Pool Fires |
| Mr. Emmanuel Ufuah |
| Optimization of Hydraulic Engine Mounts through Simplified and Full Vehicle models |
| Dr. Abdolreza Ohadi |
ICME XVIII [ Day Three ( 11:15 - 13:00 ) at Seminar Room E ] |
Session Chair: Dr. Walid Abdelghaffar |
| Infrastructure Assessment: A Case Study of Aluminium Smelting Plant, Nigeria |
| Mr. Bassey Okon |
| Impeller Treatment for a Centrifugal Fan using Splitter Vanes - A CFD Approach |
| Mr. MADHWESH N |
| Independent Power Producer (IPP) Participation: Solution to Nigeria Power Generation Problem |
| Mr. O. Phillips Agboola |
| Influence of Gravity on the Performance Index of Microchannel Heat Exchangers-Experimental Investigations |
| Dr. Thanhtrung Dang |
| Generation of Energy Conservation Measures for Sponge Iron Plants |
| Dr. Shabina Khanam |
| Assessing Vehicular Inspection Centers using Multiple Decision-Making Criteria |
| Dr. Mohamed Y. E. Selim |
| Bolted Joining and Repair of Composite Stiffeners |
| Miss Nisha Mohan |
ICME XIX [ Day Three ( 14:40 - 15:30 ) at Seminar Room A ] |
Session Chair: Dr. Diego Alonso |
| Determination of Kingpin Axis from Wheel Points Using Dual Quaternion Analysis |
| Prof. Yung-Chang Chen |
| Stress Concentration around Circular/Elliptical/Triangular Cutouts in Infinite Composite Plate |
| Dr. Dharmendra Sharma |
ICME XX [ Day Three ( 16:00 - 18:00 ) at Seminar Room A ] |
Session Chair: Dr. Copilusi Petre Cristian |
| Comparative Study of the Phenomenon of Propagation of Elastic Waves in Conduits |
| Mr. Fouzi Abdessemed |
| Using Stirling Engine to Increase the Efficiency of an IC Engine |
| Mr. GURUVAYURAPPAN ANANTHA PADMANABHAN RENUKA, and Mr. PRAKASH SOUNDARRAJAN |
| Effect of Varying Inlet Valve Throat Diameter at Different IVO, IVC, and OVERLAP Angles on SI Engine Performance |
| Dr. Osama Ghazal |
| Research on the Contact Area between the Timing Belt and the Toothed Pulley |
| Dr. Grzegorz Domek |
| A Performance Based Fire Analysis of Simple Beams Supporting Non-structural Concrete Slabs |
| Mr. Emmanuel Ufuah |
| Robust Stabilization of Jet Engine Compressor in the Presence of Noise and Unmeasured States |
| Prof. John A. AKPOBI |
ICME XXI [ Day Three ( 16:00 - 18:00 ) at Seminar Room D ] |
Session Chair: Dr. Shabina Khanam |
| Mechanical Prediction of Materials Behaviour: Towards a Sustainable Infrastructural Growth |
| Mr. Bassey Okon |
| Automotive Chassis Topology Optimization: a Comparison Between Spider and Coupe Designs |
| Dr. Marco Cavazzuti |
| Bio-ethanol Derivation from Energy Crop in Nigeria: A Path to Food Scarcity or Bio-fuel Advancement |
| Mr. O. Phillips Agboola |
| An Analytical Method for Failure Prediction of Composite Pinned Joints |
| Dr. Olanrewaju Aluko |
| Passive Anterior-Posterior Knee Stability After Unconstrained Unicompartmental Arthroplasty |
| Dr. Ahmed Imran |
| Computer-Aided Modelling for a Poly Articulated Robotic Arm with Spherical Joints |
| Miss Violeta Cristina Dumitru |
| Enhanced Multi-Channel Active Fuzzy Neural Network Noise Control in an Enclosure |
| Mr. Navid Azadi, and Dr. Abdolreza Ohadi |
ICME XXII [ Day Three ( 16:00 - 18:00 ) at Seminar Room E ] |
Session Chair: Dr. Thanhtrung Dang |
| Adding Fillers to Change the Mechanical Behaviour of the Glass Composite Materials |
| Prof. Camelia CERBU |
| Drying of Oil Palm Frond via Swirling Fluidization Technique |
| Mr. Mohd Faizal Mohideen Batcha |
| A Study of Impact Regime Boundary Transitions |
| Dr. Paul Bland |
| Isothermal Piston Skirts EHL Using Viscous Oil at Idling Speed Engine Start Up - Small Radial Clearance Effects |
| Mr. SYED ADNAN QASIM |
| Effects of Fuel Droplet Break-up, Heating and Evaporation in Diesel Engines |
| Dr. Walid Abdelghaffar |
Poster Session |
| An SPH Approach for Fluid-Hypoelastic Structure Interactions with Free Surfaces |
| Dr. Nima Amanifard |
| Aspects regarding the Water Jet Propulsion using Explosive Energy for Door Breaching |
| Dr. Marin Lupoae |
| Aspects Concerning Progressive Collapse of a Reinforced Concrete Frame Structure with Infill Walls |
| Dr. Marin Lupoae |
| Thermal Analysis of SI-Engine using Simplified Finite Element Model |
| Dr. Thet Thet Mon |
| Properties of (A384.1)1-x [(SiC)p]x Composites by Keeping Particle Size at 0.220 um |
| Mr. Nrip Jit |
| Numerical Simulation of the Mitral Valve Opening Using Smoothed Particle Hydrodynamics |
| Dr. Nima Amanifard |
| Study of the Parameters Affecting Erosion Wear of Ductile Material in Solid-Liquid Mixture |
| Mr. MILIND PATIL |
| Dynamic Modeling and Adaptive Control of a Cable-suspended Robot |
| Dr. Amir Lotfavar |
| Performance of Single Cylinder DI Diesel Engine - Varied Compression Ratio Fueled With Blends of Ethanol |
| Mr. MILIND PATIL |
| Comparative Analysis of SK-14 and PRINCE-15 Solar Concentrators |
| Mr. MILIND PATIL |
| Performance Characterization of Single Cylinder DI Diesel Engine Fueled with Karanja Biodiesel |
| Mr. MILIND PATIL |
| Study of an Unsteady Flow at the Downstream of a Hydraulic Structure and its Influence on the Streambed |
| Dr. Ali Fourar |
| Neural Network Based Analysis of Thermal Properties Rubber Composite Material - Pneumatic Tire |
| Dr. A.P.Sathiya Gnanam |
| Experimental Studies on the Combustion Characteristics and Performance of A Direct Injection Engine Fueled with Biodiesel/Diesel Blends with SCR |
| Dr. A.P.Sathiya Gnanam |
| Distortion Analysis of Arc Shaped Workpiece in NC Machining |
| Dr. Zhongyi Mei |
| Impact of Jet Reynolds Number and Feed Channel Geometry on Heat Transfer in a Channel with Inclined Target Surface Cooled by Single Array of Centered Impinging Jets with Outflow in Both Directions |
| Mr. Ali Al Mubarak |
| Investigation of the Virial Stress Distribution and its Relation with the Macroscopic Properties of a Single Crystal Copper Plate with an Elliptical Void |
| Mr. Iman Ebrahimi |
| Exact Analytical Solutions of Three Nonlinear Heat Transfer Models |
| Dr. Shashi Kumar |
| Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of the Human Heart |
| Dr. Mohsen Hassan |
The 2011 International Conference of Manufacturing Engineering and Engineering Management ( ICMEEM ) | |
ICMEEM I [ Day One ( 9:15 - 10:45 ) at Seminar Room G ] |
Session Chair: Dr. Sergio Sousa |
| A Wholesaler's Optimal Quantity Discount Policy for Deteriorating Items |
| Dr. Hidefumi Kawakatsu |
| The Role of Top Management in Using Knowledge Management as a Tool for Innovation - A System Dynamics Perspective |
| Mr. Vasanth Kamath |
| Optimal Multi-Period Supplier Selection and Order Allocation in a Multi-Product Supply Chain incorporating Customer Flexibility |
| Ms. Lixin Cui |
| Electrical Insulating Properties of Developed Composite Material from Palm kernel/Sawdust |
| Dr. JOHN OSARENMWINDA |
| Empirical Modeling the Effects of Cutting Parameters in High-Speed End Milling of Hardened AISI D2 under MQL Environment |
| Dr. Asif Iqbal |
| A Novel Bi-Objective Multi-Product Post-Sales Reverse Logistics Network Design Model |
| Prof. Seyed hessameddin Zegordi |
ICMEEM II [ Day One ( 14:00 - 15:30 ) at Seminar Room G ] |
Session Chair: Dr. Hidefumi Kawakatsu |
| Quality Improvement Practices Adopted by Industrial Companies in Portugal |
| Dr. Sergio Sousa |
| How to Manage and Motivate Staff During a Strategic Change Project in a Chinese Manufacturing Operation |
| Mr. Keji Xu |
| ANN Assisted Prediction of Weld Bead Geometry in Gas Tungsten Arc Welding of HSLA Steels |
| Dr. Asif Iqbal |
| Weighted Flow Distribution Model of the Reverse Logistics System |
| Prof. Deepinder Singh |
| Cloud Computing and Enterprise Resource Planning Systems |
| Prof. Dinesh Saini |
| Application of Simulation Model for Distributed Scheduling Problems in FMS |
| Dr. NAGAMUTHU SELVARAJ |
ICMEEM III [ Day Two ( 9:00 - 11:00 ) at Seminar Room G ] |
Session Chair: Dr. Isabel Lopes |
| A Novel Hybrid Algorithm for Multi-Period Production Scheduling of Jobs in Virtual Cellular Manufacturing Systems |
| Mr. Jun MA |
| Engineering Students Perception of Professor Role as a Leader: An Empirical Study |
| Prof. Shiva Prasad H.C |
| Probing Variance Separation on Coordinate Measuring Machines |
| Prof. Rene Mayer |
| Compensation of Machine Tool Spindle Error Motions in the Radial Direction for Accurate Monitoring of Cutting Forces Utilizing Sensitive Displacement Sensors |
| Dr. Ahmed Sarhan |
| Parameter Optimization during Finish End Milling of Al Alloy 5083 using Robust Design |
| Prof. JOHN KECHAGIAS |
| Milk Run Logistics: Literature Review and Directions |
| Dr. Gurinder Singh Brar |
| A Simple Approach to Project Scheduling in Networks with Stochastic Durations |
| Dr. Siamak Haji Yakhchali |
| No-wait Flowshop Scheduling Using Genetic Algorithm |
| Dr. Imran Ali Chaudhry |
ICMEEM IV [ Day Two ( 11:15 - 13:00 ) at Seminar Room G ] |
Session Chair: Dr. Ahmed Sarhan |
| Principles and Practices of Lean Production applied in a Metal Structures Production System |
| Dr. Isabel Lopes |
| Effect of Rake Angle on Wear of Coated Cutting Tools |
| Dr. Surangsee Dechjarern |
| Identifying Logistics Requirements for Enterprise Interoperability and Collaboration: A European Project Case |
| Prof. Gulcin Buyukozkan |
| Dynamic Maintenance Strategy, the Panacea to Materials Wastage from Machinery |
| Mr. MICHAEL KANISURU ADEYERI |
| Statistical Inferences for Future Outcomes with Applications to Maintenance and Reliability |
| Prof. Nicholas A. Nechval |
| On Possible and Necessary Optimality of Schedules in the Single Machine Scheduling Problem with Imprecise Processing Times and Due Dates |
| Dr. Siamak Haji Yakhchali |
ICMEEM V [ Day Two ( 14:00 - 15:30 ) at Seminar Room G ] |
Session Chair: Dr. Perminder Jit Singh |
| Optimization of a Multiphase Multiproduct Production Line based on Virtual Cells |
| Mr. Luis Pinto Ferreira |
| Hob3D: A Novel Gear Hobbing Simulation Software |
| Prof. ARISTOMENIS ANTONIADIS |
| Modeling and Simulation of Manufacturing Systems in Unstable Environment |
| Dr. Xiaofeng Hu |
| Process Modelling and Analysis of a Quality Management System for Higher Education |
| Miss Basma ElSharef |
| Fuel Consumption Modeling of an Automobile with a Leaked Exhaust System |
| Dr. Peter Kayode Oke |
| Oil Level Measurement in Front Fork |
| Mr. Shashikant Pople |
ICMEEM VI [ Day Two ( 16:00 - 18:00 ) at Seminar Room G ] |
Session Chair: Dr. Surangsee Dechjarern |
| Management Commitment and Employee Empowerment in Environmentally Conscious Manufacturing Implementation |
| Dr. Perminder Jit Singh |
| Assessing Proton and Vendors Design Capabilities towards Internationalization |
| Mrs. Ana Sakura Zainal Abidin |
| Modelling Collaboration Formation with a Game Theory Approach |
| Prof. Gulcin Buyukozkan |
| Impact of Radio Frequency Identification (RFID) on Life Cycle Engineering |
| Dr. Can (John) Saygin |
| A Study on the Attributes Sampling Plans in MIL-STD-1916 |
| Prof. Ming-Hsien Li |
| Modeling of the Market-Manufacturing System Relationship |
| Prof. Daschievici Luiza |
| Comparison of Software and Hardware Design Tools (CASE vs. Simulators) |
| Prof. Dinesh Saini |
| Force Model Study for the Bending Actuator with Multiple Shape Memory Alloy Wires |
| Mr. Yao-Jen Lai |
| Modelling of Analysis of Influence Parameters on Cycle Time in a Novel Conical Spouted Bed Dryer with a Draft Tube |
| Prof. Maria J San Jose, and Dr. Sonia Alvarez |
ICMEEM VII [ Day Three ( 9:00 - 11:00 ) at Seminar Room G ] |
Session Chair: Prof. Liana HANCU |
| Selecting the Appropriate Technology Transfer Method to Reach the Technology Localization |
| Mrs. Leila Tahmooresnejad |
| Knowledge Management in Mechanical Engineering |
| Prof. Ghelase Daniela |
| Design and Simulation of Reverse Logistics Network: A Case Study |
| Prof. Arvind Jayant |
| Bullwhip Effect Mitigation in Trading System: A System Dynamics Approach |
| Prof. Lewlyn L.R. Rodrigues |
| Knowledge Management in Machining Processes |
| Prof. Daschievici Luiza |
| On Computing the Minimal Latest Starting Times of Activities in Interval-Valued Networks with Generalized Precedence Relations |
| Dr. Siamak Haji Yakhchali |
| Vehicle Fuel Consumption Modelling: A System Dynamics Approach |
| Ms. Farahnaz Golrooy Motlagh |
ICMEEM VIII [ Day Three ( 11:15 - 13:00 ) at Seminar Room G ] |
Session Chair: Prof. Lewlyn L.R. Rodrigues |
| Lean Manufacturing Implementation in Malaysian Automotive Components Manufacturer: a Case Study |
| Mr. Rasli Muslimen |
| Research Regarding the Improvement of the Performance of Rubber Dies |
| Prof. Liana HANCU, and Mr. Nicolae Panc |
| Government Policy and SME Viability: The Heat Transfer Model for Diffusion of Government Policy for Technical SMEs |
| Dr. David Wyrick |
| Energy Based Efficient Resources for Real Time Manufacturing Systems |
| Mr. Usman Ghani |
| Investigation of Supply Chain Risk in the Indian Pharmaceutical Industry: A Case Study |
| Mr. Nakul Nagarajan, Mr. Haresh Mahendran, and Mr. Karthik Narasimhan |
| A Generalized Robust Stabilization of Nonlinear Feedback Systems in the Presence of Disturbance (Noise) Signals at each Subsystem, using Integrator Backstepping with Saturation Functions |
| Prof. John A. AKPOBI |
| Using Wavelet Transform and Boundary Elements for Flaw Detection |
| Mr. Luis Pena |
ICMEEM IX [ Day Three ( 14:00 - 15:30 ) at Seminar Room G ] |
Session Chair: Dr. Brian Boswell |
| Investment Decision based on a Genetic Algorithm to Optimize the Profitability of Fattening-sheep Farming |
| Mrs. Iracema del Pilar Angulo-Fernandez |
| Knowledge Management in Competitive Control of the Machining Systems |
| Prof. Ghelase Daniela |
| Human Resource Management Stress Management - Focused on Indian Information Technology Scenario |
| Mr. Ranjith Kumar Varadharaajulu, Mr. Ramachandran Mohan, and Mr. Sathish Ram Sivaprakasam |
| Intelligent Modeling of Surface Roughness during Diamond Grinding of Advanced Ceramics |
| Dr. Avanish Kumar Dubey |
| Hierarchical Description of Technological Devices |
| Prof. Neculai Seghedin |
| Change Point Estimation of Location Parameter in Multistage Processes |
| Mr. Mehdi Davoodi |
ICMEEM X [ Day Three ( 16:00 - 18:00 ) at Seminar Room G ] |
Session Chair: Mrs. Iracema del Pilar Angulo-Fernandez |
| Deterministic and Probabilistic EOQ models for products having Power Demand Pattern |
| Dr. Sarbjit Singh |
| An Investigation of Surface Finish in Dry Turning |
| Dr. Brian Boswell |
| Framework for Implementing Sustainable Practices in SMEs in the United States |
| Dr. David Wyrick |
| Markov Modeling and Availability Analysis of a Chemical Production System-A Case Study |
| Dr. Pardeep Gupta |
| A Case Study of Just-In-Time System in the Chinese Automotive Industry |
| Dr. Hing Chan |
| Use of Value Mapping Tools for Manufacturing Systems Redesign |
| Miss Zuhara Chavez |
| Optimization of GMAW Protocols and Parameters for Improving Weld Strength Quality Applying the Taguchi Method |
| Dr. Joseph Achebo |
| Total Productive Maintenance: A Study of Malaysian Automotive SMEs |
| Mr. Badli Shah Mohd Yusoff |
Poster Session |
| Formulation of Silicon Carbide Abrasives from Locally Sourced Raw Materials in Nigeria |
| Dr. Andrew Odior |
| Value Stream Map Simulator Using ExtendSim |
| Mr. Mohamed Shararah |
| Human Error Hotspots in Nuclear Power Plants |
| Dr. Selva Rivera |
| Asset Management: A Review of Contemporary & Individualised Strategies |
| Mr. James Hogan |
| Machinability of Hard Martensitic Stainless Steel and Hard Alloy Steel by CBN and PCBN Tools by Turning Process |
| Dr. SIVAPRAKASAM THAMIZHMANII |
| A Scenario-Based Objective Function for an M/M/K Queuing Model with Priority (A Case Study in the Gear Box Production Factory) |
| Mr. Hamid Reza Rezaei |
The 2011 International Conference of Signal and Image Engineering ( ICSIE ) | |
ICSIE I [ Day One ( 11:15 - 13:00 ) at Seminar Room G ] |
Session Chair: Mr. Jerome Foussier |
| Adaptive Embedded Zero Tree for Scalable Video Coding |
| Prof. Mehmet Resit Tolun |
| A Framework of Video News System Using Image Segmentation and Augmented Reality |
| Dr. Jia-Hong Lee |
| Automatic Absolute Distance Measurement with One Micrometer Uncertainty Using a Michelson Interferometer |
| Mr. khaled alzahrani |
| Surface Image Processing Algorithms in Scanning Probe Microscopy and Nanohardness Measurements |
| Dr. Natalia Lvova |
| Detection of Bare PCB Defects by Image Subtraction Method using Machine Vision |
| Mr. AJAY PAL SINGH CHAUHAN |
| The Modified Bidimensional Empirical Mode Decomposition for Color Image Decomposition |
| Prof. Milind Vinayakrao Sarod |
| Registration of Satellite Imagery Using Genetic Algorithm |
| Dr. JYOTI SINGHAI |
ICSIE II [ Day One ( 16:00 - 18:00 ) at Seminar Room G ] |
Session Chair: Prof. Mehmet Resit Tolun |
| Fusion of Non-Contacting Sensors and Vital Parameter Extraction Using Kalman Filtering |
| Mr. Jerome Foussier |
| Inverse Halftoning Method Using Pattern Substitution Based Data Hiding Scheme |
| Dr. Jia-Hong Lee |
| Cardiac Auscultation Improvement by Objective Criteria Computing |
| Dr. Maamar AHFIR |
| Enhancement of Context by Image Fusion |
| Dr. Jagpal Singh Ubhi |
| On an Adaptive Filter based on Simultaneous Perturbation Stochastic Approximation Method |
| Dr. Hong Son Hoang |
| Single Image Super Resolution Using Sparse Image and GLCM Statistics as Priors |
| Prof. Subrahmanyam Ravishankar |
| Vector Median Filter with Directional Detector for Color Image Denoising |
| Dr. Vladimir Khryashchev |
| First Order Fractional Fourier Transform Moment Based on Ambiguity Function |
| Dr. Sedigheh Ghofrani |
| Performance Analysis of an Adaptive Algorithm for DOA Estimation |
| Prof. Assimakis Leros |
ICSIE III [ Day Three ( 9:00 - 11:00 ) at Seminar Room C ] |
| A Novel Approach to the Restoration of AFM Images by Employing an Estimated Impulse Response for the AFM Calculated Using a Square Pillar Sample |
| Mr. Ahmed Ahtaiba |
| A Study of Some New Features for the Palmprint Based Authentication |
| Mrs. Neha Mittal |
| Speaker Identification System based on PLP Coefficients and Artificial Neural Network |
| Dr. Rachida Djeradi |
| An Interactive Colour Video Segmentation using Granular Reflex Fuzzy Neural Network |
| Dr. Abhijeet Nandedkar |
| DCT-compressive Sampling of Frequency-sparse Audio Signals |
| Mr. Cesar Marco Antonio Robles Gonzalez |
| Multiresolution Edge Fusion using SWT and SFM |
| Dr. Somkait Udomhunsakul |
| A Review of the Fingerprint, Speaker Recognition, Face Recognition and Iris Recognition Based Biometric Identification Technologies |
| Miss TIWALADE MAJEKODUNMI |
| An Obstacle Detection System for Blind People |
| Dr. Sabalan Daneshvar |
ICSIE IV [ Day Three ( 16:00 - 18:00 ) at Seminar Room C ] |
| Automatic Microaneurysm Detection from Non-dilated Diabetic Retinopathy Retinal Images |
| Dr. Akara Sopharak, and Mr. Bunyarit Uyyanonvara |
| Multiple Target Tracking with C2 Symmetric Measurements |
| Dr. Shovan Bhaumik |
| Assessing the Quality of Spot Welding Electrode Tips Using Image Processing Techniques |
| Mr. Abdulwanis Abdulhadi |
| Formantic Analysis of Speech Signal by Wavelet Transform |
| Dr. Falek Leila |
| Digital Mammogram Segmentation using Non-Shannon Measures of Entropy |
| Mr. BALJIT SINGH KHEHRA |
| A Content based CT Image Retrieval by Advance Multiple Comparison Technique |
| Mrs. J Bridget Nirmala |
| Multispectral and Panchromatic Images Fusion Based on Integrating Feedback Retina and IHS Model |
| Dr. Sabalan Daneshvar |
| Determination of Damages in Beams Using Wavelet Transforms |
| Mr. RAMON SILVA |
Poster Session |
| A Novel Prosthetic Hand Control Approach Based on Genetic Algorithm and Wavelet Packet Transform Features |
| Mr. Mohammad Karimi |
| Eclectic Genetic Algorithm for Holistic Face Recognition in L_infinite Space |
| Dr. CARLOS VILLEGAS |