 |
 |
 |
 |
 |
|
Proceedings of the World Congress on Engineering 2011 WCE 2011, July 6-8, 2011, London, U.K.
The 2011 International Conference of Applied and Engineering Mathematics Combined Eigenfunction Expansion and Convergence Accelerator Approach to the Rapid Numerical Evaluation of Hilbert Transforms Ignacio Porras, Corey D. Schuster, and Frederick W. King Proceedings of The World Congress on Engineering 2011 , pp1-6 [Online Full Text]
Spatial Disorder of Soliton Solutions for 2D Nonlinear Schrodinger Lattices Shih-Feng Shieh Proceedings of The World Congress on Engineering 2011 , pp7-12 [Online Full Text]
Behavior of Axial Dual-spin Spacecraft Vladimir Aslanov Proceedings of The World Congress on Engineering 2011 , pp13-18 [Online Full Text]
Symplectic Numerical Methods for a Linear Stochastic Oscillator with Two Additive Noises Lijin Wang, Jialin Hong, and Rudolf Scherer Proceedings of The World Congress on Engineering 2011 , pp19-23 [Online Full Text]
Solution of a Singular BVP of Reaction-diffusion in a Biocatalyst by OHAM Mohammad Danish, Shashi Kumar, and Surendra Kumar Proceedings of The World Congress on Engineering 2011 , pp24-28 [Online Full Text]
Some Results on Fuzzy Metric Spaces Bhardwaj R.K., Singhi J., Shrivastava R., and Rajput S.S Proceedings of The World Congress on Engineering 2011 , pp29-32 [Online Full Text]
State Feedback Based Linear Slip Control Formulation for Vehicular Antilock Braking System Otis T.C. Nyandoro, Jimoh O. Pedro, Barry Dwolatzky, and Olurotimi A. Dahunsi Proceedings of The World Congress on Engineering 2011 , pp33-38 [Online Full Text]
Computational Modelling on the Contact Interface with Boundary-layer Approach L. Hou, D.Z. Lin, B.Wang, H.L. Li, and L. Qiu Proceedings of The World Congress on Engineering 2011 , pp39-44 [Online Full Text]
Generalization of the Takacs' Formula for GI/M/n/0 Queuing System with Heterogeneous Servers H. Okan Isguder, Umay Uzunoglu Kocer, and C. Cengiz Celikoglu Proceedings of The World Congress on Engineering 2011 , pp45-47 [Online Full Text]
First Order Method for Optimal Control using Parmetric Optimization Amr Radwan, and Andreas Griewank Proceedings of The World Congress on Engineering 2011 , pp48-51 [Online Full Text]
Semi-infinite Model of Emissions Limits of Firms in the Areas with Mixture Landscapes V. V. Fedosov, and A. V. Fedossova Proceedings of The World Congress on Engineering 2011 , pp52-56 [Online Full Text]
Efficiency of the Strain Based Approach Compared to the Displacement Formulation for the Analysis of Structures D. HAMADI, A. OUNIS, and C.A. D'Mello Proceedings of The World Congress on Engineering 2011 , pp57-62 [Online Full Text]
Optimization of Prediction Intervals for Order Statistics Based on Censored Data Nicholas A. Nechval, Maris Purgailis, Konstantin N. Nechval, and Uldis Rozevskis Proceedings of The World Congress on Engineering 2011 , pp63-69 [Online Full Text]
Analysis of Least Stable Mode of Buoyancy Assisted Mixed Convective Flow in Vertical Pipe Filled with Porous Medium P. Bera, and Ashok Kumar Proceedings of The World Congress on Engineering 2011 , pp70-75 [Online Full Text]
Common Solution of Nonlinear Functional Equations via Iterations Muhammad Arshad, Akbar Azam, and Pasquale Vetro Proceedings of The World Congress on Engineering 2011 , pp76-81 [Online Full Text]
An Embedded Analysis Method for Complexities of Problems Xiaodong Wang, Weibin Wu, and Daxin Zhu Proceedings of The World Congress on Engineering 2011 , pp82-86 [Online Full Text]
CFD Analysis of Winglets at Low Subsonic Flow M. A Azlin, C.F Mat Taib, S. Kasolang, and F.H Muhammad Proceedings of The World Congress on Engineering 2011 , pp87-91 [Online Full Text]
A Web-based Tool to Evaluate the Iterative Processes of Direct Search Methods Pedro Mestre, Aldina Correia, Joao Matias, Christophe Teixiera, Jose Almeida, and Carlos Serodio Proceedings of The World Congress on Engineering 2011 , pp92-97 [Online Full Text]
Reliability Measures in Circulant Network Indra Rajasingh, Bharati Rajan, and R. Sundara Rajan Proceedings of The World Congress on Engineering 2011 , pp98-102 [Online Full Text]
Maximizing Power Generation in Chemical Systems and Fuel Cells S. Sieniutycz Proceedings of The World Congress on Engineering 2011 , pp103-108 [Online Full Text]
Numerical Solution of Sine-Gordon Equation by Reduced Differential Transform Method Yildiray Keskin, Ibrahim Caglar, and Ayse Betul Koc Proceedings of The World Congress on Engineering 2011 , pp109-113 [Online Full Text]
Enumeration of a Class of Cyclic Number Fields of Degree 10 Schehrazad SELMANE Proceedings of The World Congress on Engineering 2011 , pp114-116 [Online Full Text]
Multicriteria Sustainability Evaluation of Transport Networks for Selected European Countries O. Ilker Kolak, Darcin Akin, S. Ilker Birbil, Orhan Feyzioglu, and Nilay Noyan Proceedings of The World Congress on Engineering 2011 , pp117-122 [Online Full Text]
Reduced Differential Transform Method for Solving Klein Gordon Equations Yildiray Keskin, Sema Servi, and Galip Oturanc Proceedings of The World Congress on Engineering 2011 , pp123-127 [Online Full Text]
A Study of Numerical Modeling of Heat Transfer in Wall-Adjacent Turbulent Flows A K Borah, and A N Dev Proceedings of The World Congress on Engineering 2011 , pp128-132 [Online Full Text]
Unsteady MHD Heat and Mass Transfer by Mixed Convection Flow in the Forward Stagnation Region of a Rotating Sphere in the Presence of Chemical Reaction and Heat Source Ali J. Chamkha, and Sameh E. Ahmed Proceedings of The World Congress on Engineering 2011 , pp133-138 [Online Full Text]
Determining the Inventory Policy for Slow-Moving Items: A Case Study Umay Uzunoglu Kocer, and Sezin Tamer Proceedings of The World Congress on Engineering 2011 , pp139-143 [Online Full Text]
Fixed Points of Quasi-Contractive Type Operators in Normed Spaces by a Three-step Iteration Process Safeer Hussain Khan Proceedings of The World Congress on Engineering 2011 , pp144-147 [Online Full Text]
On the Nonlinear Estimation of GARCH Models Using an Extended Kalman Filter Sebastian Ossandon, and Natalia Bahamonde Proceedings of The World Congress on Engineering 2011 , pp148-151 [Online Full Text]
Artificial Neural Network Modeling & Standardization of HPTLC Method for the Estimation of Cholesterol in Edible Oils J. K. Arora, and M. M. Srivastava Proceedings of The World Congress on Engineering 2011 , pp152-154 [Online Full Text]
Inclusions Between the Spaces of Strongly Almost Convergent Sequences Defined by An Orlicz Function in A Seminormed Space Vinod K. Bhardwaj, and Indu Bala Proceedings of The World Congress on Engineering 2011 , pp155-159 [Online Full Text]
Mathematical Modelling of Bubble Nucleation in Stout Beers and Experimental Verification M. G. Devereux, and W. T. Lee Proceedings of The World Congress on Engineering 2011 , pp160-164 [Online Full Text]
Random Ishikawa Iteration Scheme of Two Random Operators Abdul Rahim Khan, and AbdulAziz Domlo Proceedings of The World Congress on Engineering 2011 , pp165-169 [Online Full Text]
Enhanced Advancing Front Technique with Extension Cases for Initial Triangular Mesh Generation Z. Abal Abas, and S. Salleh Proceedings of The World Congress on Engineering 2011 , pp170-175 [Online Full Text]
Impact of Fluid Streams on Horizontal Walls Paul Christodoulides, Frederic Dias, and Lazaros Lazari Proceedings of The World Congress on Engineering 2011 , pp176-181 [Online Full Text]
Application of the General Variational Iteration Method to a Nonlinear System A. Lotfavar, H. Rafieipour, and H. Latifizadeh Proceedings of The World Congress on Engineering 2011 , pp182-185 [Online Full Text]
Study of Solutions of a Nonlinear Fractional Partial Differential Equation M.M. Rodrigues Proceedings of The World Congress on Engineering 2011 , pp186-190 [Online Full Text]
Imbibition Phenomenon arising in Double Phase Flow through Porous Medium with Capillary Pressure Ramakanta Meher, and S.K Meher Proceedings of The World Congress on Engineering 2011 , pp191-195 [Online Full Text]
Regulated Functions with values in the Banach Algebra of Quaternions Fernandes L.A.O., and Arbach, R. Proceedings of The World Congress on Engineering 2011 , pp196-201 [Online Full Text]
On Adjacency Matrix of One Type of Graph and Pell Numbers Fatih YILMAZ, and Durmus BOZKURT Proceedings of The World Congress on Engineering 2011 , pp202-204 [Online Full Text]
A General Approach to the Formulae Used in the Conjugate Directions Method for Solving Linear Systems of Algebraic Equations Andrei Nicolaide Proceedings of The World Congress on Engineering 2011 , pp205-210 [Online Full Text]
A Risk Model on the Weekend's Returns of the U.S. Movie Industry Novriana Sumarti, and Rafki Hidayat Proceedings of The World Congress on Engineering 2011 , pp211-215 [Online Full Text]
Uncertainty in a Mixed Duopoly with Quadratic Costs Fernanda A. Ferreira Proceedings of The World Congress on Engineering 2011 , pp216-219 [Online Full Text]
Robust Cross-Layer Network Optimization for Diverse QoS Requirements: Work in Progress V. Marbukh Proceedings of The World Congress on Engineering 2011 , pp220-224 [Online Full Text]
Control and Stability on the Euclidean Group SE (2) C.C. Remsing Proceedings of The World Congress on Engineering 2011 , pp225-230 [Online Full Text]
On Riemann-Liouville and Caputo Impulsive Fractional Calculus M. De la Sen Proceedings of The World Congress on Engineering 2011 , pp231-236 [Online Full Text]
On Partial Fraction Decomposition of Rational Functions with Irreducible Quadratic Factors in the Denominators Yiu-Kwong Man Proceedings of The World Congress on Engineering 2011 , pp237-239 [Online Full Text]
Further Results on the Game of Cutblock Alessandro Cincotti Proceedings of The World Congress on Engineering 2011 , pp240-242 [Online Full Text]
Maximum-revenue Tariff with Different Roles in a Price-setting Competition Fernanda A. Ferreira, and Flavio Ferreira Proceedings of The World Congress on Engineering 2011 , pp243-246 [Online Full Text]
A Better Approximation to the Solution of Burger-Fisher Equation D. KOCACOBAN, A.B. KOC, A. KURNAZ, and Y. KESKIN Proceedings of The World Congress on Engineering 2011 , pp247-251 [Online Full Text]
Unsteady MHD Laminar Boundary Layer Flow due to an Impulsively Stretching Surface A.H. Srinivasa, and A.T. Eswara Proceedings of The World Congress on Engineering 2011 , pp252-255 [Online Full Text]
On the Heat Conduction in Natural Porous and Anisotropic Materials I. Malujda, and A. Marlewski Proceedings of The World Congress on Engineering 2011 , pp261-265 [Online Full Text]
A Generalized Stochastic Model for Number of Events in Equilibrium Renewal Process (ERP) V.K. Singh, and B.P. Singh Proceedings of The World Congress on Engineering 2011 , pp266-269 [Online Full Text]
On Solvability of the Nonlinear Optimal Control Problem for Processes Described by the Semi-linear Parabolic Equations Akylbek Kerimbekov Proceedings of The World Congress on Engineering 2011 , pp270-275 [Online Full Text]
Nonparametric Identification of the Production Functions Gennady Koshkin, and Anna Kitayeva Proceedings of The World Congress on Engineering 2011 , pp276-280 [Online Full Text]
Differentials of Eigenvalues and Eigenvectors in Undamped Discrete Systems under Alternative Normalizations Michele Bernasconi, Christine Choirat, and Raffaello Seri Proceedings of The World Congress on Engineering 2011 , pp285-287 [Online Full Text]
Solving Heat Equation by the Adomian Decomposition Method A. Cheniguel, and A. Ayadi Proceedings of The World Congress on Engineering 2011 , pp288-290 [Online Full Text]
Fuzzy TOPSIS Method in the Selection of Investment Boards by Incorporating Operational Risks Elissa Nadia Madi, and Abu Osman Md Tap Proceedings of The World Congress on Engineering 2011 , pp291-295 [Online Full Text]
Distribution of Terminal Cost Functional in Discrete-Time Controlled System with Noise-Corrupted State Information Valery Y. Glizer, Vladimir Turetsky, and Josef Shinar Proceedings of The World Congress on Engineering 2011 , pp296-300 [Online Full Text]
Gradient-based Sharpness Function Maria Rudnaya, Robert Mattheij, Joseph Maubach, and Hennie ter Morsche Proceedings of The World Congress on Engineering 2011 , pp301-306 [Online Full Text]
The 2011 International Conference of Computational Statistics and Data Engineering Initial Values in Estimation Procedures for State Space Models (SSMs) Raed Alzghool, and Yan-Xia Lin Proceedings of The World Congress on Engineering 2011 , pp307-313 [Online Full Text]
Detection of the Time of a Step Change in Monitoring Survival Time Hassan Assareh, and Kerrie Mengersen Proceedings of The World Congress on Engineering 2011 , pp314-319 [Online Full Text]
Multinomial Least Angle Regression with Application to Web Personalization Ilya Gluhovsky Proceedings of The World Congress on Engineering 2011 , pp320-325 [Online Full Text]
The Effect of Link Function on the Monitoring of Logistic Regression Profiles Mehdi Koosha, and Amirhossein Amiri Proceedings of The World Congress on Engineering 2011 , pp326-328 [Online Full Text]
Comparing Several Methods to Fit Finite Mixture Models to Grouped Data by the EM Algorithm Joanna Wengrzik, and Jurgen Timm Proceedings of The World Congress on Engineering 2011 , pp329-332 [Online Full Text]
Regularized Data-Based Nonparametric Filtration of Stochastic Signals Alexander V. Dobrovidov, and Gennady M. Koshkin Proceedings of The World Congress on Engineering 2011 , pp333-337 [Online Full Text]
Modeling and Forecasting Stock Market Volatility by Gaussian Processes based on GARCH, EGARCH and GJR Models PhichHang Ou, and Hengshan Wang Proceedings of The World Congress on Engineering 2011 , pp338-342 [Online Full Text]
Clickstream Data Warehousing for Web Crawlers Profiling Analia Lourenco, and Orlando Belo Proceedings of The World Congress on Engineering 2011 , pp343-348 [Online Full Text]
Detection of Glioma (Tumor) Growth by Advanced Diameter Technique Using MRI Data S. Karpagam, and S. Gowri Proceedings of The World Congress on Engineering 2011 , pp349-354 [Online Full Text]
Greening Data Communications and Computer Networks through the Networking Academy Analyn Niere Yumang, Glenn Ople Avendano, and Geraldo Calderero Talisic Proceedings of The World Congress on Engineering 2011 , pp355-359 [Online Full Text]
Quasi-Linear PCA: Low Order Spline's Approach to Non-Linear Principal Components Nuno Lavado, and Teresa Calapez Proceedings of The World Congress on Engineering 2011 , pp360-364 [Online Full Text]
Identifying the Time of a Linear Trend Disturbance in Odds Ratio of Clinical Outcomes Hassan Assareh, Ian Smith, and Kerrie Mengersen Proceedings of The World Congress on Engineering 2011 , pp365-370 [Online Full Text]
The 2011 International Conference of Financial Engineering Applying Variance Gamma Correlated to Estimate Optimal Portfolio of Variance Swap Lingyan Cao, and Zheng-Feng Guo Proceedings of The World Congress on Engineering 2011 , pp371-376 [Online Full Text]
An Approach to Deal with Asymmetry in the Optimal Hedge Ratio Youssef El-Khatib, and Abdulnasser Hatemi-J Proceedings of The World Congress on Engineering 2011 , pp377-380 [Online Full Text]
Artificial Intelligence Modeling of Financial Profit and Fraud D. Sawh, K. Ponnambalam, and F. Karray Proceedings of The World Congress on Engineering 2011 , pp381-383 [Online Full Text]
Simple Technical Trading Rules on the JSE Securities Exchange of South Africa, Part 2 H.M. Campbell Proceedings of The World Congress on Engineering 2011 , pp384-390 [Online Full Text]
Standardised Black-Litterman Approach using the TRP Ratio Gal Munda, and Sebastjan Strasek Proceedings of The World Congress on Engineering 2011 , pp391-396 [Online Full Text]
Prediction of Expected Rate of Return in Tehran Stock Exchange Zahra Amirhosseini, and Somayeh Mohseni Behbahani Proceedings of The World Congress on Engineering 2011 , pp397-400 [Online Full Text]
On The Price Sensitivities During Financial Crisis Youssef El-Khatib, and Abdulnasser Hatemi-J Proceedings of The World Congress on Engineering 2011 , pp401-404 [Online Full Text]
Financial Integration and Financial Efficiency: an Analysis of their Relation in the Colombian Stock Market Juan David Alban Conto, and Julio Villarreal Navarro Proceedings of The World Congress on Engineering 2011 , pp405-411 [Online Full Text]
Risk-Taking, Financial Distress and Innovation Arnav Sheth, Larry Shepp, and Oded Palmon Proceedings of The World Congress on Engineering 2011 , pp412-417 [Online Full Text]
The Random Walk Hypothesis in Emerging Stock Market-Evidence from Nonlinear Fourier Unit Root Test Seyyed Ali Paytakhti Oskooe Proceedings of The World Congress on Engineering 2011 , pp418-422 [Online Full Text]
Sensitivity Analysis based on Artificial Neural Networks for Evaluating Economical Plans Fraydoon Rahnamy Roodposti, and Reza Ehtesham Rasi Proceedings of The World Congress on Engineering 2011 , pp423-428 [Online Full Text]
Utility Implementation for Cyber Risk Insurance Modeling Dinesh Kumar Saini, Imran Azad, Nitin B Raut, and Lingaraj A. Hadimani Proceedings of The World Congress on Engineering 2011 , pp429-432 [Online Full Text]
Pricing of Volatility Derivatives using 3/2-Stochastic Models Joanna Goard Proceedings of The World Congress on Engineering 2011 , pp433-438 [Online Full Text]
A Smooth Transition GARCH Model with Asymmetric Transition Phases Zheng-Feng Guo, and Lingyan Cao Proceedings of The World Congress on Engineering 2011 , pp439-441 [Online Full Text]
The 2011 International Conference of Information Engineering Instructional Design Rationale with QOC: A Model Driven Engineering and Domain Specific Modeling Approach El Amine Ouraiba, Christophe Choquet, and Philippe Cottier Proceedings of The World Congress on Engineering 2011 , pp442-446 [Online Full Text]
Ship Wake Simulation Based on Particle System in Virtual Test Liu Chunwu, Li Ting, Huang Zhiping, Zhao Dexin, and Zhang Yimeng Proceedings of The World Congress on Engineering 2011 , pp447-450 [Online Full Text]
Specifying QoS Structural Constraints in RM-ODP Jalal Laassiri, Salah-ddine Krit, Said El Hajji, and Mohamed Bouhdadi Proceedings of The World Congress on Engineering 2011 , pp451-455 [Online Full Text]
A New Approach to Word Sense Disambiguation Based on Context Similarity M. Nameh, S.M. Fakhrahmad, and M. Zolghadri Jahromi Proceedings of The World Congress on Engineering 2011 , pp456-459 [Online Full Text]
Cross-field Usage of Rice Paddy Digitalization Chuan-Lin Lai, Chia-Chen Kuo, Yi-Haur Shiau, and Sheng-Hua Wang Proceedings of The World Congress on Engineering 2011 , pp460-464 [Online Full Text]
Cloud for Pollution Control and Global Warming Nitin B Raut, Jabar H. Yousif, Sanad Al Maskari, and Dinesh Kumar Saini Proceedings of The World Congress on Engineering 2011 , pp465-468 [Online Full Text]
The 2011 International Conference of Information Security and Internet Engineering Uncertainties of Online Phishing Risks and Consumer Decision Making in B2C E-Commerce Ping An Wang Proceedings of The World Congress on Engineering 2011 , pp469-474 [Online Full Text]
The SOAP Protocol Used for Building and Testing Web Services Mironela Pirnau, Claudiu Pirnau, Marius Apetrei, and Gheorghe Badea Proceedings of The World Congress on Engineering 2011 , pp475-480 [Online Full Text]
Securing Cloud System via Internal Control Management Ashwin Alfred Pinto, Shvetank Verma, Satyam Singh, Prashant Srivastava, Rahul Gupta, and Vijay Chourasia Proceedings of The World Congress on Engineering 2011 , pp481-484 [Online Full Text]
Broker Architecture for Quality of Service Dinesh Kumar Saini, Sanad Al Maskari, R G Dabhade, Sandhya V Khandage, and Lingaraj A. Hadimani Proceedings of The World Congress on Engineering 2011 , pp485-490 [Online Full Text]
A Proposed Framework to Prevent Financial Fraud through ATM Card Cloning Divya Singh, Pratima Kushwaha, Priyanka Choubey, Abhishek Vaish, and Utkarsh Goel Proceedings of The World Congress on Engineering 2011 , pp491-494 [Online Full Text]
Self-adaptability in Secure Embedded Systems: an Energy-Performance Trade-off N. Botezatu, V. Manta, and A. Stan Proceedings of The World Congress on Engineering 2011 , pp495-499 [Online Full Text]
A Novel Encryption System using Layered Cellular Automata M Phani Krishna Kishore, S Kanthi Kiran, B Bangaru Bhavya, and S Harsha Chaitanya S Proceedings of The World Congress on Engineering 2011 , pp500-505 [Online Full Text]
An Agent Subscription-based Model for CRLs Validation Sekpon Juntapremjitt, Somchart Fugkeaw, and Piyawit Manpanpanich Proceedings of The World Congress on Engineering 2011 , pp506-509 [Online Full Text]
An Interactive Firewall Simulator for Information Assurance Education Kenneth Williams, and Huiming Yu Proceedings of The World Congress on Engineering 2011 , pp510-513 [Online Full Text]
Standards and Frameworks for Information System Security Auditing and Assurance Mario Spremic Proceedings of The World Congress on Engineering 2011 , pp514-519 [Online Full Text]
Security and Vulnerability Issues in University Networks Sanad Al Maskari, Dinesh Kumar Saini, Swati Y Raut, and Lingraj A Hadimani Proceedings of The World Congress on Engineering 2011 , pp520-524 [Online Full Text]
Models for Recommender Systems in Web Usage Mining Based on User Ratings Gopinath Ganapathy, and K. Arunesh Proceedings of The World Congress on Engineering 2011 , pp525-530 [Online Full Text]
Dynamic Bandwidth Shaping Algorithm for Internet Traffic Sharing Environments Phongphan Danphitsanuphan Proceedings of The World Congress on Engineering 2011 , pp531-534 [Online Full Text]
The 2011 International Conference of Manufacturing Engineering and Engineering Management Compensation of Machine Tool Spindle Error Motions in the Radial Direction for Accurate Monitoring of Cutting Forces Utilizing Sensitive Displacement Sensors Ahmed A. D. Sarhan, M. A. Hassan, Atsushi Matsubara, and M. Hamdi Proceedings of The World Congress on Engineering 2011 , pp535-539 [Online Full Text]
A Wholesaler's Optimal Quantity Discount Policy for Deteriorating Items Hidefumi Kawakatsu Proceedings of The World Congress on Engineering 2011 , pp540-544 [Online Full Text]
Asset Management: A Review of Contemporary & Individualised Strategies James Hogan, Frances Hardiman, and Michael Daragh Naughton Proceedings of The World Congress on Engineering 2011 , pp545-549 [Online Full Text]
Probing Variance Separation on Coordinate Measuring Machines A. Nafi, and J. R. R. Mayer Proceedings of The World Congress on Engineering 2011 , pp550-553 [Online Full Text]
Machinability of Hard Martensitic Stainless Steel and Hard Alloy Steel by CBN and PCBN Tools by Turning Process S.Thamizhmanii, and S. Hasan Proceedings of The World Congress on Engineering 2011 , pp554-559 [Online Full Text]
A Simple Approach to Project Scheduling in Networks with Stochastic Durations Siamak Haji Yakhchali Proceedings of The World Congress on Engineering 2011 , pp560-565 [Online Full Text]
A Scenario-Based Objective Function for an M/M/K Queuing Model with Priority (A Case Study in the Gear Box Production Factory) H. R. Rezaei, A. Asgari, H. Mogouei, and Amirhossein Amiri Proceedings of The World Congress on Engineering 2011 , pp566-570 [Online Full Text]
Selecting the Appropriate Technology Transfer Method to Reach the Technology Localization L.Tahmooresnejad, R.Salami, and M.A.Shafia Proceedings of The World Congress on Engineering 2011 , pp571-575 [Online Full Text]
A Generalized Robust Stabilization of Nonlinear Feedback Systems in the Presence of Disturbance (Noise) Signals at each Subsystem, using Integrator Backstepping with Saturation Functions John A. Akpobi, and G. C. Ovuworie Proceedings of The World Congress on Engineering 2011 , pp576-586 [Online Full Text]
Bullwhip Effect Mitigation in Trading System: A System Dynamics Approach Lewlyn L. R. Rodrigues, Sunith Hebbar, and Ramdev Herle Proceedings of The World Congress on Engineering 2011 , pp587-592 [Online Full Text]
Human Resource Management Stress Management - Focused on Indian Information Technology Scenario R. Dhanapal V. Ranjith Kumar, M. Ramachandran, and S. Sathish Ram Proceedings of The World Congress on Engineering 2011 , pp593-595 [Online Full Text]
On Computing the Minimal Latest Starting Times of Activities in Interval-Valued Networks with Generalized Precedence Relations Siamak Haji Yakhchali Proceedings of The World Congress on Engineering 2011 , pp596-600 [Online Full Text]
Modeling and Simulation of Manufacturing Systems in Unstable Environment Xiaofeng Hu, and Ruxiao An Proceedings of The World Congress on Engineering 2011 , pp601-604 [Online Full Text]
Markov Modeling and Availability Analysis of a Chemical Production System-A Case Study Pardeep Gupta Proceedings of The World Congress on Engineering 2011 , pp605-610 [Online Full Text]
Knowledge Management in Mechanical Engineering D. Ghelase, L. Daschievici, and A. Epureanu Proceedings of The World Congress on Engineering 2011 , pp611-615 [Online Full Text]
Optimization of a Multiphase Multiproduct Production Line based on Virtual Cells Luis Pinto Ferreira, Enrique Ares Gomez, Gustavo Pelaez Lourido, and Benny Tjahjono Proceedings of The World Congress on Engineering 2011 , pp616-621 [Online Full Text]
Change Point Estimation of Location Parameter in Multistage Processes Seyed Taghi Akhavan Niaki, Mehdi Davoodi, and Elnaz Asghari Torkamani Proceedings of The World Congress on Engineering 2011 , pp622-626 [Online Full Text]
Parameter Optimization during Finish End Milling of Al Alloy 5083 using Robust Design John D. Kechagias, Christos K. Ziogas, Menelaos K. Pappas, and Ioannis E. Ntziatzias Proceedings of The World Congress on Engineering 2011 , pp627-631 [Online Full Text]
Force Model Study for the Bending Actuator with Multiple Shape Memory Alloy Wires Yao-Jen Lai, Long-Jyi Yeh, and Min-Chie Chiu Proceedings of The World Congress on Engineering 2011 , pp632-637 [Online Full Text]
A Study on the Attributes Sampling Plans in MIL-STD-1916 M. H. C. Li, A. Al-Refaie, and C. W. Tsao Proceedings of The World Congress on Engineering 2011 , pp638-643 [Online Full Text]
Management Commitment and Employee Empowerment in Environmentally Conscious Manufacturing Implementation Perminder Jit Singh, and KS Sangwan Proceedings of The World Congress on Engineering 2011 , pp644-649 [Online Full Text]
Optimal Control of Water Supply in Pipe Networks by Retention Tanks: A Linear Case Nagib G. N. Mohammed Proceedings of The World Congress on Engineering 2011 , pp650-655 [Online Full Text]
Investment Decision based on a Genetic Algorithm to Optimize the Profitability of Fattening-sheep Farming Iracema del P. Angulo-Fernandez, Alberto A. Aguilar-Lasserre, Magno A. Gonzalez-Huerta, and Constantino G. Moras-Sanchez Proceedings of The World Congress on Engineering 2011 , pp656-660 [Online Full Text]
Process Modelling and Analysis of a Quality Management System for Higher Education Basma El-Sharef, and Khaled S. El-Kilany Proceedings of The World Congress on Engineering 2011 , pp661-666 [Online Full Text]
Optimization of GMAW Protocols and Parameters for Improving Weld Strength Quality Applying the Taguchi Method Joseph I. Achebo Proceedings of The World Congress on Engineering 2011 , pp667-670 [Online Full Text]
Oil Level Measurement in Front Fork Pranav Deshpande, and Shashikant Pople Proceedings of The World Congress on Engineering 2011 , pp671-675 [Online Full Text]
On Possible and Necessary Optimality of Schedules in the Single Machine Scheduling Problem with Imprecise Processing Times and Due Dates Siamak Haji Yakhchali, and Ali Husseinzadeh Kashan Proceedings of The World Congress on Engineering 2011 , pp676-680 [Online Full Text]
Cloud Computing and Enterprise Resource Planning Systems S L Saini, Dinesh Kumar Saini, Jabar H. Yousif, and Sandhya V Khandage Proceedings of The World Congress on Engineering 2011 , pp681-684 [Online Full Text]
A Novel Hybrid Algorithm for Multi-Period Production Scheduling of Jobs in Virtual Cellular Manufacturing Systems K.L. Mak, and J. Ma Proceedings of The World Congress on Engineering 2011 , pp685-690 [Online Full Text]
Dynamic Maintenance Strategy, the Panacea to Materials Wastage from Machinery M.K. Adeyeri, B. Kareem, S.P. Ayodeji, and I. Emovon Proceedings of The World Congress on Engineering 2011 , pp691-695 [Online Full Text]
Quality Improvement Practices Adopted by Industrial Companies in Portugal Isabel S. Lopes, Eusebio P. Nunes, Sergio D. Sousa, and Dina Esteves Proceedings of The World Congress on Engineering 2011 , pp696-701 [Online Full Text]
Government Policy and SME Viability: The Heat Transfer Model for Diffusion of Government Policy for Technical SMEs Chinweike I. Eseonu, and David A. Wyrick Proceedings of The World Congress on Engineering 2011 , pp702-706 [Online Full Text]
Knowledge Management in Machining Processes Daschievici Luiza, Ghelase Daniela, and Epureanu Alexandru Proceedings of The World Congress on Engineering 2011 , pp707-711 [Online Full Text]
Engineering Students Perception of Professor Role as a Leader: An Empirical Study Shiva Prasad H.C Proceedings of The World Congress on Engineering 2011 , pp712-715 [Online Full Text]
A Novel Bi-Objective Multi-Product Post-Sales Reverse Logistics Network Design Model Seyed Hessameddin Zegordi, Majid Eskandarpour, and Ehsan Nikbakhsh Proceedings of The World Congress on Engineering 2011 , pp716-720 [Online Full Text]
A Study on the Blended Wax Patterns in Investment Casting Process Omkar Bemblage, and D. Benny Karunakar Proceedings of The World Congress on Engineering 2011 , pp721-727 [Online Full Text]
Assessing Proton and Vendors Design Capabilities towards Internationalization Ana Sakura Zainal Abidin, Rosnah Mohd Yusuff, Mohd. Azni Awi, Norzima Zulkifli, and Rasli Muslimen Proceedings of The World Congress on Engineering 2011 , pp728-733 [Online Full Text]
Empirical Modeling the Effects of Cutting Parameters in High-Speed End Milling of Hardened AISI D2 under MQL Environment Asif Iqbal, Ning He, and Liang Li Proceedings of The World Congress on Engineering 2011 , pp734-739 [Online Full Text]
Knowledge Management in Competitive Control of the Machining Systems D. Ghelase, L. Daschievici, and C. Falticeanu Proceedings of The World Congress on Engineering 2011 , pp740-743 [Online Full Text]
Principles and Practices of Lean Production applied in a Metal Structures Production System R. Carvalho, A. Alves, and I. Lopes Proceedings of The World Congress on Engineering 2011 , pp744-749 [Online Full Text]
Framework for Implementing Sustainable Practices in SMEs in the United States Ganapathy S. Natarajan, and David A. Wyrick Proceedings of The World Congress on Engineering 2011 , pp750-754 [Online Full Text]
Value Stream Map Simulator Using ExtendSim Mohamed A. Shararah, Khaled S. El-Kilany, and Aziz E. El-Sayed Proceedings of The World Congress on Engineering 2011 , pp755-758 [Online Full Text]
The Role of Top Management in Using Knowledge Management as a Tool for Innovation - A System Dynamics Perspective Vasanth Kamath, Lewlyn L. R. Rodrigues, and Pradeep Desai Proceedings of The World Congress on Engineering 2011 , pp759-762 [Online Full Text]
Modelling Collaboration Formation with a Game Theory Approach Jbid Arsenyan, Gulcin Buyukozkan, and Orhan Feyzioglu Proceedings of The World Congress on Engineering 2011 , pp763-767 [Online Full Text]
Comparison of Software and Hardware Design Tools (CASE vs. Simulators) Lingaraj A. Hadimani, Dinesh Kumar Saini, Vaishali P Khoche, and Sanad Al Maskari Proceedings of The World Congress on Engineering 2011 , pp768-771 [Online Full Text]
Lean Manufacturing Implementation in Malaysian Automotive Components Manufacturer: a Case Study Rasli Muslimen, Sha'ri Mohd Yusof, and Ana Sakura Zainal Abidin Proceedings of The World Congress on Engineering 2011 , pp772-776 [Online Full Text]
Identifying Logistics Requirements for Enterprise Interoperability and Collaboration: A European Project Case Gulcin Buyukozkan, Leyla Arsan, Mehmet Tanyas, and Aslihan Kagnici Proceedings of The World Congress on Engineering 2011 , pp777-782 [Online Full Text]
Research Regarding the Improvement of the Performance of Rubber Dies N. Panc, L. Hancu, and N. Balc Proceedings of The World Congress on Engineering 2011 , pp783-786 [Online Full Text]
Formulation of Silicon Carbide Abrasives from Locally Sourced Raw Materials in Nigeria A. O. Odior, and F. A. Oyawale Proceedings of The World Congress on Engineering 2011 , pp787-791 [Online Full Text]
Modeling of the Market-Manufacturing System Relationship Daschievici Luiza, Ghelase Daniela, and Falticeanu Constantin Proceedings of The World Congress on Engineering 2011 , pp792-796 [Online Full Text]
Milk Run Logistics: Literature Review and Directions Gurinder Singh Brar, and Gagan Saini Proceedings of The World Congress on Engineering 2011 , pp797-801 [Online Full Text]
Energy Based Efficient Resources for Real Time Manufacturing Systems Usman Ghani, Radmehr Monfared, and Robert Harrison Proceedings of The World Congress on Engineering 2011 , pp802-806 [Online Full Text]
Study of Exponential Thermal Effect on Vibration of Non-Homogeneous Orthotropic Rectangular Plate Having Bi-Directional Linear Variation in Thickness Tripti Johri, and Indu Johri Proceedings of The World Congress on Engineering 2011 , pp807-811 [Online Full Text]
Deterministic and Probabilistic EOQ models for products having Power Demand Pattern Singh Sarbjit, and Singh Shivraj Proceedings of The World Congress on Engineering 2011 , pp812-817 [Online Full Text]
ANN Assisted Prediction of Weld Bead Geometry in Gas Tungsten Arc Welding of HSLA Steels Asif Iqbal, Saeed M. Khan, and Mukhtar, and H. Sahir Proceedings of The World Congress on Engineering 2011 , pp818-821 [Online Full Text]
Electrical Insulating Properties of Developed Composite Material from Palm kernel/Sawdust Osarenmwinda J.O., and Nwachukwu J.C Proceedings of The World Congress on Engineering 2011 , pp822-824 [Online Full Text]
Intelligent Modeling of Surface Roughness during Diamond Grinding of Advanced Ceramics Pankaj Kumar Shrivastava, and Avanish Kumar Dubey Proceedings of The World Congress on Engineering 2011 , pp825-830 [Online Full Text]
Effect of Rake Angle on Wear of Coated Cutting Tools Surangsee Dechjarern, and Esteban P. Busso Proceedings of The World Congress on Engineering 2011 , pp831-835 [Online Full Text]
Investigation of Supply Chain Risk in the Indian Pharmaceutical Industry: A Case Study Haresh Mahendran, Karthik Narasimhan, Nakul Nagarajan, and Gopinath S Proceedings of The World Congress on Engineering 2011 , pp836-841 [Online Full Text]
How to Manage and Motivate Staff During a Strategic Change Project in a Chinese Manufacturing Operation KeJi XU Proceedings of The World Congress on Engineering 2011 , pp842-849 [Online Full Text]
Use of Value Mapping Tools for Manufacturing Systems Redesign Romero D., and Chavez Z. Proceedings of The World Congress on Engineering 2011 , pp850-854 [Online Full Text]
Impact of Radio Frequency Identification (RFID) on Life Cycle Engineering C. Saygin, and B. Guleryuz Proceedings of The World Congress on Engineering 2011 , pp855-860 [Online Full Text]
Hob3D: A Novel Gear Hobbing Simulation Software Nikolaos Tapoglou, and Aristomenis Antoniadis Proceedings of The World Congress on Engineering 2011 , pp861-864 [Online Full Text]
Statistical Inferences for Future Outcomes with Applications to Maintenance and Reliability Nicholas A. Nechval, Konstantin N. Nechval, and Maris Purgailis Proceedings of The World Congress on Engineering 2011 , pp865-871 [Online Full Text]
Design and Simulation of Reverse Logistics Network: A Case Study Arvind Jayant, P. Gupta, and S.K. Garg Proceedings of The World Congress on Engineering 2011 , pp872-876 [Online Full Text]
Hierarchical Description of Technological Devices N. Seghedin Proceedings of The World Congress on Engineering 2011 , pp877-884 [Online Full Text]
Application of Simulation Model for Distributed Scheduling Problems in FMS N. Selvaraj Proceedings of The World Congress on Engineering 2011 , pp885-889 [Online Full Text]
Human Error Hotspots in Nuclear Power Plants Jorge E. Nunez Mc Leod, and Selva S. Rivera Proceedings of The World Congress on Engineering 2011 , pp890-894 [Online Full Text]
An Investigation of Surface Finish in Dry Turning M. N. Islam, and Brian Boswell Proceedings of The World Congress on Engineering 2011 , pp895-900 [Online Full Text]
Weighted Flow Distribution Model of the Reverse Logistics System Deepinder Singh, Harpuneet Singh, and Nikhil Walia Proceedings of The World Congress on Engineering 2011 , pp901-903 [Online Full Text]
A Case Study of Just-In-Time System in the Chinese Automotive Industry Bo Hou, Hing Kai Chan, and Xiaojun Wang Proceedings of The World Congress on Engineering 2011 , pp904-908 [Online Full Text]
Fuel Consumption Modeling of an Automobile with a Leaked Exhaust System P.K. Oke, B. Kareem, and O.E. Alayande Proceedings of The World Congress on Engineering 2011 , pp909-912 [Online Full Text]
Optimal Multi-Period Supplier Selection and Order Allocation in a Multi-Product Supply Chain incorporating Customer Flexibility K.L. Mak, and L.X. Cui Proceedings of The World Congress on Engineering 2011 , pp913-918 [Online Full Text]
The 2011 International Conference of Computational Intelligence and Intelligent Systems Robot Navigation Using View Sequences and Sliding Window Search Mateus Mendes, A. Paulo Coimbra, and Manuel M. Crisostomo Proceedings of The World Congress on Engineering 2011 , pp920-925 [Online Full Text]
Multiple Products Partner Selection Model of Virtual Enterprise based on Multi-agent Systems Chunxia Yu, and T. N. Wong Proceedings of The World Congress on Engineering 2011 , pp926-931 [Online Full Text]
A Semantic-Supported Knowledge Development Conception Eckhard Ammann, Ismael Navas-Delgado, and Jose F. Aldana-Montes Proceedings of The World Congress on Engineering 2011 , pp932-937 [Online Full Text]
Robust Component-based Face Detection Using Color Feature Ali Atharifard, and Sedigheh Ghofrani Proceedings of The World Congress on Engineering 2011 , pp938-943 [Online Full Text]
Evolutionary Optimization Approach for Fingerprint Classification Jing-Wein Wang Proceedings of The World Congress on Engineering 2011 , pp944-948 [Online Full Text]
Algorithm for Compiling Unrestricted Ladder Diagram to IEC 61131-3 Compliant Instruction List Kando Hamiyanze Moonga, You Linru, and Liu Shaojun Proceedings of The World Congress on Engineering 2011 , pp949-954 [Online Full Text]
Combined Complex-Valued Artificial Neural Network (CCVANN) Murat Ceylan Proceedings of The World Congress on Engineering 2011 , pp955-959 [Online Full Text]
A Meta-logical Approach for Reasoning with Ontologies and Rules in OWL 2 Visit Hirankitti, and Trang Mai Xuan Proceedings of The World Congress on Engineering 2011 , pp960-965 [Online Full Text]
Improving FSM Evolution Algorithm Nada M. A. Al Sallami Proceedings of The World Congress on Engineering 2011 , pp966-969 [Online Full Text]
Fuzzy Uncertainties in Human Reliability Analysis Selva S. Rivera, Pedro A. Baziuk, and Jorge E. NunezMcLeod Proceedings of The World Congress on Engineering 2011 , pp970-975 [Online Full Text]
Tuning of Type-2 Fuzzy Systems by Simulated Annealing to Predict Time Series Majid Almaraashi, and Robert John Proceedings of The World Congress on Engineering 2011 , pp976-980 [Online Full Text]
Rotor Bar Fault Diagnosis by Using Power Factor Hayri Arabaci, Osman Bilgin, and Abdullah Urkmez Proceedings of The World Congress on Engineering 2011 , pp981-984 [Online Full Text]
Pattern Recognition for Discrimination of Dyslipidemic States Gerard G. Dumancas, Mary Muriuki, A. David Marais, Neil Purdie, and Lisa Reilly Proceedings of The World Congress on Engineering 2011 , pp985-990 [Online Full Text]
Machine Learning Classification Technique for Famine Prediction Washington Okori, and Joseph Obua Proceedings of The World Congress on Engineering 2011 , pp991-996 [Online Full Text]
Artificial Intelligence in E-Leaning-Pedagogical and Cognitive Aspects Jabar H.Yousif, Dinesh Kumar Saini, and Hassan S. Uraibi Proceedings of The World Congress on Engineering 2011 , pp997-1002 [Online Full Text]
Wavelet Neural Network for Classification of Bundle Branch Blocks Rahime Ceylan, and Yuksel Ozbay Proceedings of The World Congress on Engineering 2011 , pp1003-1007 [Online Full Text]
An Interval Type-2 Fuzzy Logic Approach for Instrument Fault Detection and Diagnosis Vitor E. Andrade, Cristiano H. Fontes, and Marcelo Embirucu Proceedings of The World Congress on Engineering 2011 , pp1008-1012 [Online Full Text]
Design of Circular Microstrip Antenna Using Artificial Neural Networks Jagtar Singh, A.P. Singh, and T.S. Kamal Proceedings of The World Congress on Engineering 2011 , pp1013-1016 [Online Full Text]
Passenger Car Unit Value for Trucks using Fuzzy Model Praveen Aggarwal Proceedings of The World Congress on Engineering 2011 , pp1017-1020 [Online Full Text]
Detecting Comfort-based Climate Settings Using Surveys Pablo Aparicio Ruiz, Jose Guadix Martin, Jesus Munuzuri Sanz, and Luis Onieva Gimenez Proceedings of The World Congress on Engineering 2011 , pp1021-1026 [Online Full Text]
Modeling and Optimization of Precedence-Constrained Production Sequencing and Scheduling Using Multi-Objective Genetic Algorithms Son Duy DAO, and Romeo MARIAN Proceedings of The World Congress on Engineering 2011 , pp1027-1032 [Online Full Text]
Application of Genetic Algorithm-Support Vector Machine for Prediction of Spinning Quality Zhi-jun Lv, Qian Xiang, and Jian-guo Yang Proceedings of The World Congress on Engineering 2011 , pp1033-1038 [Online Full Text]
Suggestions for the Structure of Kernel Software in Intelligent Seismic Nets George R. Daglish, and Yuri P. Sizov Proceedings of The World Congress on Engineering 2011 , pp1039-1045 [Online Full Text]
Personalized Multimedia Recommendation with Social Tags and Context Awareness Che Kao-Li, Tsung-Hsien Yang, and Wei-Po Lee Proceedings of The World Congress on Engineering 2011 , pp1046-1051 [Online Full Text]
Vehicle Tracking using Convolutional Neural Network S. Shruthi Proceedings of The World Congress on Engineering 2011 , pp1052-1055 [Online Full Text]
A Robot Group Control Based on Bayesian Reasoning Tomislav Stipancic, Bojan Jerbic, and Petar Curkovic Proceedings of The World Congress on Engineering 2011 , pp1056-1060 [Online Full Text]
An Auction-based Approach with Closed-loop Bid Adjustment to Dynamic Task Allocation in Robot Teams W. K. Zhu, and S. H. Choi Proceedings of The World Congress on Engineering 2011 , pp1061-1066 [Online Full Text]
The 2011 International Conference of Computational Intelligence and Intelligent Systems Special Session: Computational Intelligence and Intelligent Systems in Industrial Engineering Preface of the 2011 International Conference of Computational Intelligence and Intelligent Systems Special Session: Computational Intelligence and Intelligent Systems in Industrial Engineering Cengiz Kahraman Proceedings of The World Congress on Engineering 2011 , pp1067-1067 [Online Full Text]
Knowledge Representation and Discovery Using Formal Concept Analysis: An HRM Application M. Bal, Y. Bal, and A. Ustundag Proceedings of The World Congress on Engineering 2011 , pp1068-1073 [Online Full Text]
Fuzzy Multi-criteria Method for Revaluation of ERP System Choices Using Real Options A.Cagri Tolga Proceedings of The World Congress on Engineering 2011 , pp1074-1078 [Online Full Text]
Optimization of First Order Partial Differential Inclusions in Gradient Form Elimhan N. Mahmudov, and Murat E. Unal Proceedings of The World Congress on Engineering 2011 , pp1079-1082 [Online Full Text]
Bayesian Network Scenarios to improve The Aviation Supply Chain M. Yorukoglu, and G. Kayakutlu Proceedings of The World Congress on Engineering 2011 , pp1083-1088 [Online Full Text]
Analysing the Impact of Universities on Regional Development: A Case Study Using Fuzzy Cognitive Maps K. Bulut, and G. Kayakutlu Proceedings of The World Congress on Engineering 2011 , pp1089-1093 [Online Full Text]
Animal Food Chain Based Particle Swarm Optimization Ayca Altay, and Gulgun Kayakutlu Proceedings of The World Congress on Engineering 2011 , pp1094-1099 [Online Full Text]
A Fuzzy Optimization Model for Single-Period Inventory Problem H. Behret, and C. Kahraman Proceedings of The World Congress on Engineering 2011 , pp1100-1105 [Online Full Text]
Fuzzy Estimations of Process Incapability Index Cengiz Kahraman, and Ihsan Kaya Proceedings of The World Congress on Engineering 2011 , pp1106-1110 [Online Full Text]
Selection of Calibration Supplier under Fuzzy Environment Nihal Erginel, and Ayse Gecer Proceedings of The World Congress on Engineering 2011 , pp1111-1115 [Online Full Text]
Ranking of the GSM Operators with Fuzzy ANP Nihal ERGINEL, and Sevil SENTURK Proceedings of The World Congress on Engineering 2011 , pp1116-1121 [Online Full Text]
Determining Weights in Multi-Objective Linear Programming under Fuzziness Gulcin Dinc Yalcin, and Nihal Erginel Proceedings of The World Congress on Engineering 2011 , pp1122-1127 [Online Full Text]
The Cruise Port Place Selection Problem with Extended VIKOR and ANP Methodologies under Fuzzy Environment Nihan CETIN DEMIREL, and G.Nilay YUCENUR Proceedings of The World Congress on Engineering 2011 , pp1128-1133 [Online Full Text]
Genetic Algorithm Performance with Different Selection Strategies in Solving TSP Noraini Mohd Razali, and John Geraghty Proceedings of The World Congress on Engineering 2011 , pp1134-1139 [Online Full Text]
The Selection of Renewable Energy Power Plant Technology Using Fuzzy Data Envelopment Analysis M. Emin Baysal, Ahmet Sarucan, Cengiz Kahraman, and Orhan Engin Proceedings of The World Congress on Engineering 2011 , pp1140-1143 [Online Full Text]
A Scatter Search Method for Fuzzy Job Shop Scheduling Problem with Availability Constraints Orhan Engin, M. Kerim Yilmaz, Cengiz Kahraman, M. Emin Baysal, and Ahmet Sarucan Proceedings of The World Congress on Engineering 2011 , pp1144-1148 [Online Full Text]
A Hierarchy Grey Relational Analysis for Selecting the Renewable Electricity Generation Technologies Ahmet Sarucan, M. Emin Baysal, Cengiz Kahraman, and Orhan Engin Proceedings of The World Congress on Engineering 2011 , pp1149-1154 [Online Full Text]
Aircraft Selection Using Analytic Network Process: A Case for Turkish Airlines Yavuz Ozdemir, Huseyin Basligil, and Merve Karaca Proceedings of The World Congress on Engineering 2011 , pp1155-1159 [Online Full Text]
Supplier Selection Using Analytic Hierarchy Process: An Application From Turkey Betul Ozkan, Huseyin Basligil, and Nergis Sahin Proceedings of The World Congress on Engineering 2011 , pp1160-1165 [Online Full Text]
An Application with Non-identical Parallel Machines using Genetic Algorithm with the Help of Fuzzy Logic Pelin Alcan, and Huseyin Basligil Proceedings of The World Congress on Engineering 2011 , pp1166-1169 [Online Full Text]
Comparison of Energy Storage Alternatives Using Fuzzy TOSIS Method Ronay Ak, and Canan Aglan Proceedings of The World Congress on Engineering 2011 , pp1170-1173 [Online Full Text]
A Modified Fuzzy Analytic Hierarchy Process Based Multicriteria Decision making Methodology for Assessing E-commerce Website Quality: A Case Study in Turkey Serhat AYDIN, and Cengiz KAHRAMAN Proceedings of The World Congress on Engineering 2011 , pp1174-1178 [Online Full Text]
Multi Criteria Evaluation of the Methods for Preventing Soil Erosion Using Fuzzy ANP: The Case of Turkey Tufan Demirel, and Serhat Tuzun Proceedings of The World Congress on Engineering 2011 , pp1179-1183 [Online Full Text]
Project Scheduling to Maximize Fuzzy Net Present Value Irem UCAL, and Dorota KUCHTA Proceedings of The World Congress on Engineering 2011 , pp1184-1189 [Online Full Text]
A Genetic Algorithm Approach for Minimizing Total Tardiness in Parallel Machine Scheduling Problems Tufan Demirel, Vildan Ozkir, Nihan Cetin Demirel, and Belgin Tasdelen Proceedings of The World Congress on Engineering 2011 , pp1190-1193 [Online Full Text]
The 2011 International Conference of Computer Science and Engineering Complex Stochastic Boolean Systems: New Properties of the Intrinsic Order Graph Luis Gonzalez Proceedings of The World Congress on Engineering 2011 , pp1194-1199 [Online Full Text]
System Performance Improvement By Server Virtualization Hitoshi Ueno, Tomohide Hasegawa, and Keiichi Yoshihama Proceedings of The World Congress on Engineering 2011 , pp1200-1205 [Online Full Text]
Speaker Clustering of Stereophonic Speech Signal Using Spatial and Sequential Gathering S. Ouamour, and H. Sayoud Proceedings of The World Congress on Engineering 2011 , pp1206-1210 [Online Full Text]
Information and Communication Technology as a Provider of Food Security: Design of an Expert System to Assist in Communication where Non-Audible Communication is Expedient O. T. Jinadu, and O. V. Johnson Proceedings of The World Congress on Engineering 2011 , pp1211-1214 [Online Full Text]
The Efficient Implementation of S8 AES Algorithm W. Ahmed, H. Mahmood, and U. Siddique Proceedings of The World Congress on Engineering 2011 , pp1215-1219 [Online Full Text]
Research on Numerical Simulation Metadata Hong Chen, Fang Xia, and Lei Song Proceedings of The World Congress on Engineering 2011 , pp1220-1225 [Online Full Text]
Software Quality Model Six Sigma Initiatives Dinesh Kumar Saini, Lingaraj A Hadiman, Poonam V Vaidya, and Sanad Al Maskari Proceedings of The World Congress on Engineering 2011 , pp1226-1230 [Online Full Text]
Towards Component-Based System Integration Testing Framework Sajjad Mahmood Proceedings of The World Congress on Engineering 2011 , pp1231-1235 [Online Full Text]
A Polynomial Time Algorithm for Undirected Graph Isomorphism Aimin Hou, and Zhifeng Hao Proceedings of The World Congress on Engineering 2011 , pp1236-1239 [Online Full Text]
Efficient Dynamic Load Balancing Algorithms for Multiclass Jobs in Peer to Peer Networks R Manjula, Pavankumar Kolla, and Kolla Haripriyanka Proceedings of The World Congress on Engineering 2011 , pp1240-1244 [Online Full Text]
Development of Computer Software for Predicting Fuel Consumption Rate of an Automobile with a Leaked Exhaust System P.K. Oke, and B. Kareem Proceedings of The World Congress on Engineering 2011 , pp1245-1248 [Online Full Text]
Code Cognitive Complexity: A New Measure Jitender Kumar Chhabra Proceedings of The World Congress on Engineering 2011 , pp1249-1253 [Online Full Text]
Hypothesis Test for Unsuccessful Partial Explorations of State Spaces of Petri Nets Eleazar JIMENEZ SERRANO Proceedings of The World Congress on Engineering 2011 , pp1254-1259 [Online Full Text]
Evaluation of Fusion and Denoising Algorithm for Multifocus Images Milindkumar V. Sarode, and Prashant R. Deshmukh Proceedings of The World Congress on Engineering 2011 , pp1260-1263 [Online Full Text]
Evaluation of Biometric Identification Systems With New Criteria of Good Quality Template Mohamed Mostafa Abd Allah Proceedings of The World Congress on Engineering 2011 , pp1264-1269 [Online Full Text]
New Technique for Road Transportation of Hazardous Materials (Hazmat) in Malaysia via Quantitative Risk Analysis Approaches Zulkifli Abdul Rashid, Mohanad El-Harbawi, K. H. K.Hamid, Sherif A. A, and A. R. Shariff Proceedings of The World Congress on Engineering 2011 , pp1270-1275 [Online Full Text]
A New Word Sense Disambiguation System Based on Deduction S.M. Fakhrahmad, A.R. Rezapour, M. Zolghadri Jahromi, and M.H. Sadreddini Proceedings of The World Congress on Engineering 2011 , pp1276-1281 [Online Full Text]
Computer Aided Assembly Animation of a Tricycle for Paraplegics S.P. Ayodeji, and M.K. Adeyeri Proceedings of The World Congress on Engineering 2011 , pp1282-1287 [Online Full Text]
Using Pre-Execution and Helper Threads for Speeding Up Data Intensive Applications Akos Dudas, and Sandor Juhasz Proceedings of The World Congress on Engineering 2011 , pp1288-1293 [Online Full Text]
Weather-adapted Vehicle Detection for Forward Collision Warning System En-Fong Chou, and Din-Chang Tseng Proceedings of The World Congress on Engineering 2011 , pp1294-1299 [Online Full Text]
The 2011 International Conference of Electrical and Electronics Engineering Harmonics and Interharmonics Measurement using Group-harmonic Power Minimizing Algorithm Hsiung Cheng Lin, Chao Hung Chen, and Liang Yih Liu Proceedings of The World Congress on Engineering 2011 , pp1300-1305 [Online Full Text]
Robust and Intelligent Control Methods to Improve the Performance of a Unified Power Flow Controller C. BENACHAIBA, AHMED M. A. HAIDAR, and M. L. DOUMBIA Proceedings of The World Congress on Engineering 2011 , pp1306-1310 [Online Full Text]
Design of an UWB Quasi Rhomboid Shaped Element Bowtie Antenna for MIMO Applications T. Phairat, and T. Chanchai Proceedings of The World Congress on Engineering 2011 , pp1311-1314 [Online Full Text]
A Modified Approach to Induction Motor Stator Voltage and Frequency Control Cosmas .U. Ogbuka, and Marcel. U. Agu Proceedings of The World Congress on Engineering 2011 , pp1315-1320 [Online Full Text]
Fuzzy Logic Control for DVR to Counter Voltage Sag on a Distribution Network Puneet Chawla, Rintu Khanna, and Abinash Singh Proceedings of The World Congress on Engineering 2011 , pp1321-1326 [Online Full Text]
Accurate Time-Domain Simulation of Nonlinear Inductors Including Hysteresis and Eddy-Current Effects Lucian MANDACHE, Dumitru TOPAN, and Ioana Gabriela SIRBU Proceedings of The World Congress on Engineering 2011 , pp1327-1332 [Online Full Text]
Embedding a Low Power Test Set for Deterministic BIST using a Gray Counter S. Kundu, and S. Chattopadhyay Proceedings of The World Congress on Engineering 2011 , pp1333-1338 [Online Full Text]
Design of Switching Control Systems Using Control Performance Assessment Index Arefeh Moridi, Shabnam Armaghan, Ali Khaki Sedigh, and Saleheh Choobkar Proceedings of The World Congress on Engineering 2011 , pp1339-1342 [Online Full Text]
Measuring the Quality Indicators of the Electric Energy Service Robin A. Pena, Victor A. Gomez, and Cesar Hernandez Proceedings of The World Congress on Engineering 2011 , pp1343-1347 [Online Full Text]
Modeling and Control of the PFC Stage for a 50KW EV Fast Battery Charger A. Kuperman, U. Levy, J. Goren, A. Zafranski, and A. Savernin Proceedings of The World Congress on Engineering 2011 , pp1348-1352 [Online Full Text]
Diaphragm Design for MEMS Pressure Sensors using a Data Mining Tool K. Y. Madhavi, Sumithradevi. K.A, M Krishna, and Andhe Dharani Proceedings of The World Congress on Engineering 2011 , pp1353-1356 [Online Full Text]
Temperature Dependent Mobility in Strained Graphene Raheel Shah, and Tariq M. G. Mohiuddin Proceedings of The World Congress on Engineering 2011 , pp1357-1362 [Online Full Text]
Effect of Throughput in MANET for Static and Dynamic Network For IEEE 802.11 S. C. Sharma, and Kumar Manoj Proceedings of The World Congress on Engineering 2011 , pp1363-1366 [Online Full Text]
Study the Influence of Thermal Oxidation on the Structures of Titanium Very Thin Layers Saeid Rafizadeh, and Haleh Kangarlou Proceedings of The World Congress on Engineering 2011 , pp1367-1369 [Online Full Text]
Resource Efficient Design and Implementation of Standard and Truncated Multipliers using FPGAs Muhammad H. Rais, Mohamed H. Al Mijalli, and Mohammad Nisar Proceedings of The World Congress on Engineering 2011 , pp1370-1374 [Online Full Text]
Teaching Control System Principles Using Remote Laboratories over the Internet Lutfi Al-Sharif, Ashraf Saleem, Walid Ayoub, and Mohammad Naser Proceedings of The World Congress on Engineering 2011 , pp1375-1379 [Online Full Text]
An Adaptive Radar Design for Small Satellite Missions Sunday C. Ekpo, and Danielle George Proceedings of The World Congress on Engineering 2011 , pp1380-1383 [Online Full Text]
Current Component Index Algorithm for Voltage Sag Source Localization N. Hamzah, A. Mohamed, and A. Hussain Proceedings of The World Congress on Engineering 2011 , pp1384-1389 [Online Full Text]
Simulation and Design of Broad-Band Slot Antenna for Wireless Applications Amar Partap Singh Pharwaha, and Shweta Rani Proceedings of The World Congress on Engineering 2011 , pp1390-1393 [Online Full Text]
Robust Actuator Fault Detection and Isolation in a Multi-Area Interconnected Power System Istemihan Genc, and Fikret Caliskan Proceedings of The World Congress on Engineering 2011 , pp1394-1398 [Online Full Text]
Design and Implementation of 8-Bit Read-Write Memory Using FIFO Algorithm Ranjan Chakraborty Proceedings of The World Congress on Engineering 2011 , pp1399-1402 [Online Full Text]
Tomography Analysis of Compacted Soil Using Electrical Conductivity Zamri Chik, and Taohidul Islam Proceedings of The World Congress on Engineering 2011 , pp1403-1405 [Online Full Text]
Modeling and Simulation of Heat Exchanger Used in Soda Recovery Chhaya Sharma, Sanjeev Gupta, and Vipin Kumar Proceedings of The World Congress on Engineering 2011 , pp1406-1409 [Online Full Text]
Solar Tracker of Two Degrees of Freedom for Photovoltaic Solar Cell Using Fuzzy Logic Gustavo Ozuna, Carlos Anaya, Diana Figueroa, and Nun Pitalua Proceedings of The World Congress on Engineering 2011 , pp1410-1413 [Online Full Text]
Optimal Placement of Wind Farm on the Power System Using Multiobjective Bees Algorithm Prakornchai Phonrattanasak Proceedings of The World Congress on Engineering 2011 , pp1414-1418 [Online Full Text]
Energy Saving in DC/AC Drive Compressors & Pumps Using ZCTF PWM Inverter: A Study Saeed Jahdi, and Loi Lei Lai Proceedings of The World Congress on Engineering 2011 , pp1419-1424 [Online Full Text]
Calculation of Optical Parameters of Titanium Nano-layers with Different Deposition Angles Haleh Kangarlou, and Maryam Motallebi Aghgonbad Proceedings of The World Congress on Engineering 2011 , pp1425-1427 [Online Full Text]
Q-Factor Evaluation of Spiral Inductor for 5.8GHz WiMAX Application Kama Azura Othman, Zuhani Ismail Khan, Siti Aminah Kadri, and Norhayati Hamzah Proceedings of The World Congress on Engineering 2011 , pp1428-1431 [Online Full Text]
Detection of Rotor Bar Faults by Using Stator Current Envelope Hayri Arabaci, and Osman Bilgin Proceedings of The World Congress on Engineering 2011 , pp1432-1435 [Online Full Text]
Optical Properties of Four Phase Systems Amir Bazdar, and Saeid Rafizadeh Proceedings of The World Congress on Engineering 2011 , pp1436-1438 [Online Full Text]
Growth of Carbon Nanotube Using Microwave Plasma Chemical Vapor Deposition and Its Application to Thermal Dissipation of High-Brightness Light Emitting Diode K. J. Gan, C. H. Chang, J. J. Lu, C. L. Lin, Y. K. Su, B. J. Li, and W. K. Yeh Proceedings of The World Congress on Engineering 2011 , pp1439-1443 [Online Full Text]
Comparison by Simulation of Various Strategies of Three Level Induction Motor Torque Control Schemes for Electrical Vehicle Application L. YOUB, and A. CRACIUNESCU Proceedings of The World Congress on Engineering 2011 , pp1444-1449 [Online Full Text]
Alternative Electric Energy Source Selection in Construction Projects: A Case Study in Turkey Farrokh Rostami Kia, Alper Cabuk, A.Emre Cengiz, Amir Taghizadeh Vahed, and Sunay Mutlu Proceedings of The World Congress on Engineering 2011 , pp1450-1454 [Online Full Text]
Interfacial Reactions between the Sn-9Zn Solder and Au/Ni/SUS304 Multi-layer Substrate Yee-Wen Yen, Chien-Chung Jao, Kuo-Sing Chao, and Shu-Mei Fu Proceedings of The World Congress on Engineering 2011 , pp1455-1459 [Online Full Text]
Grounding Electrode Calculations Using the Matrix Method A. M. R Martins, S. J. P. S. Mariano, and M. R. A. Calado Proceedings of The World Congress on Engineering 2011 , pp1460-1464 [Online Full Text]
Energy Function Analysis of a Single-Machine Infinite-Bus Power System A. Cifci, Y. Uyaroglu, and A. T. Hocaoglu Proceedings of The World Congress on Engineering 2011 , pp1465-1470 [Online Full Text]
Analysis of a Comb Type Microactuator Used in Micro Thermal Switches P. K. Patowari, J. Saikia, P.S. Chatterjee, A. Ramachandran, Ashwin P.G., and S. Baishya Proceedings of The World Congress on Engineering 2011 , pp1471-1474 [Online Full Text]
Preparation of MnOX Nano-supercapacitor with Silver Addition by Electrochemical Deposition Yi Hu, Jiun-Shing Liu, Chien-Lung Huang, and Tung-Cheng Liu Proceedings of The World Congress on Engineering 2011 , pp1475-1478 [Online Full Text]
Designing Vivaldi Antenna with Various Sizes using CST Software NORHAYATI HAMZAH, and KAMA AZURA OTHMAN Proceedings of The World Congress on Engineering 2011 , pp1479-1483 [Online Full Text]
Digital Control for Dynamic Performance Enhancement of DC-DC Switching Converters Yan-Fei Liu Proceedings of The World Congress on Engineering 2011 , pp1484-1488 [Online Full Text]
An Efficient Hybrid Neuro-fuzzy Control Scheme of Synchronous Generator: A Case Study Gagandeep Kaur Proceedings of The World Congress on Engineering 2011 , pp1489-1492 [Online Full Text]
Hysteresis Modeling in a Piezoelectric Nanopositioner Stage A. Telba, and Wahied G. Ali Proceedings of The World Congress on Engineering 2011 , pp1493-1495 [Online Full Text]
Resistance Switching Properties in Cu/Cu-SiO2/TaN Device Shyankay Jou, Bohr-Ran Hwang, and Chia-Jen Li Proceedings of The World Congress on Engineering 2011 , pp1496-1499 [Online Full Text]
Deposition of Doped TiO2 Thin Film by Sol Gel Technique and its Characterization: A Review A.M Gaur, Rajat Joshi, and Mukesh Kumar Proceedings of The World Congress on Engineering 2011 , pp1500-1503 [Online Full Text]
Modeling of BLDC Motor with Ideal Back-EMF for Automotive Applications A. Tashakori, M. Ektesabi, and N. Hosseinzadeh Proceedings of The World Congress on Engineering 2011 , pp1504-1508 [Online Full Text]
A Remote Microprocessor-Based Monitoring and Control System via Internet in Case Study of Pet Care H. C. Lin, K. H. Pai, C. H. Chen, S. Y. Lai, and Y. C. Lai Proceedings of The World Congress on Engineering 2011 , pp1509-1514 [Online Full Text]
Design and Simulation of Diminished-One Modulo 2n+1 Adder Using Circular Carry Selection Ruchi Singh, and R. A. Mishra Proceedings of The World Congress on Engineering 2011 , pp1515-1518 [Online Full Text]
The 2011 International Conference of Parallel and Distributed Computing Improving Performance of Collection-Oriented Operations through Parallel Fusion Bruce P. Lester Proceedings of The World Congress on Engineering 2011 , pp1519-1529 [Online Full Text]
Cost based Resource Provisioning Policy for Grids Rajni Aron, and Inderveer Chana Proceedings of The World Congress on Engineering 2011 , pp1530-1533 [Online Full Text]
Parallelizing Multi-objective Evolutionary Genetic Algorithms G. N. Shinde, Sudhir B. Jagtap, and Subhendu Kumar Pani Proceedings of The World Congress on Engineering 2011 , pp1534-1537 [Online Full Text]
Shortest Path Routing on Multi-Mesh of Trees Sudhanshu Kumar Jha, and Prasanta K. Jana Proceedings of The World Congress on Engineering 2011 , pp1538-1542 [Online Full Text]
The 2011 International Conference of Signal and Image Engineering Inverse Halftoning Method Using Pattern Substitution Based Data Hiding Scheme Mei-Yi Wu, Jia-Hong Lee, and Hong-Jie Wu Proceedings of The World Congress on Engineering 2011 , pp1543-1548 [Online Full Text]
Multiple Target Tracking with C2 Symmetric Measurements Swati, and Shovan Bhaumik Proceedings of The World Congress on Engineering 2011 , pp1549-1552 [Online Full Text]
DCT-compressive Sampling of Frequency-sparse Audio Signals R.G. Moreno-Alvarado, and Mauricio Martinez-Garcia Proceedings of The World Congress on Engineering 2011 , pp1553-1556 [Online Full Text]
Assessing the Quality of Spot Welding Electrode Tips Using Image Processing Techniques Abdulwanis Abdulhadi, Munther Gdeisat, Dave Burton, and Francis Lilley Proceedings of The World Congress on Engineering 2011 , pp1557-1562 [Online Full Text]
Single Image Super Resolution Using Sparse Image and GLCM Statistics as Priors Subrahmanyam Ravishankar, Nagadastagiri Reddy.C, and M.V.Joshi Proceedings of The World Congress on Engineering 2011 , pp1563-1566 [Online Full Text]
Adaptive Embedded Zero Tree for Scalable Video Coding Roya Choupani, Stephan Wong, and Mehmet R. Tolun Proceedings of The World Congress on Engineering 2011 , pp1567-1571 [Online Full Text]
Formantic Analysis of Speech Signal by Wavelet Transform L. Falek, A. Amrouche, L. Fergani, H. Teffahi, and A. Djeradi Proceedings of The World Congress on Engineering 2011 , pp1572-1576 [Online Full Text]
Surface Image Processing Algorithms in Scanning Probe Microscopy and Nanohardness Measurements N. Lvova, I. Shirokov, A. Useinov, and K. Gogolinskiy Proceedings of The World Congress on Engineering 2011 , pp1577-1582 [Online Full Text]
Automatic Microaneurysm Detection from Non-dilated Diabetic Retinopathy Retinal Images Akara Sopharak, Bunyarit Uyyanonvara, Sarah Barman, and Tom Williamson Proceedings of The World Congress on Engineering 2011 , pp1583-1586 [Online Full Text]
Enhancement of Context by Image Fusion Jagpal Singh Ubhi, and Jaspreet Kaur Proceedings of The World Congress on Engineering 2011 , pp1587-1591 [Online Full Text]
Fusion of Non-Contacting Sensors and Vital Parameter Extraction Using Kalman Filtering Jerome Foussier, Daniel Teichmann, Jing Jia, and Steffen Leonhardt Proceedings of The World Congress on Engineering 2011 , pp1592-1596 [Online Full Text]
Detection of Bare PCB Defects by Image Subtraction Method using Machine Vision Ajay Pal Singh Chauhan, and Sharat Chandra Bhardwaj Proceedings of The World Congress on Engineering 2011 , pp1597-1601 [Online Full Text]
An Obstacle Detection System for Blind People Nazli Mohajeri, Roozbeh Raste, and Sabalan Daneshvar Proceedings of The World Congress on Engineering 2011 , pp1602-1605 [Online Full Text]
Cardiac Auscultation Improvement by Objective Criteria Computing Maamar Ahfir, and Izzet Kale Proceedings of The World Congress on Engineering 2011 , pp1606-1609 [Online Full Text]
The Modified Bidimensional Empirical Mode Decomposition for Color Image Decomposition Faten Ben Arfia, Abdelouahed Sabri, Mohamed Ben Messaoud, and Mohamed Abid Proceedings of The World Congress on Engineering 2011 , pp1610-1613 [Online Full Text]
Multispectral and Panchromatic Images Fusion Based on Integrating Feedback Retina and IHS Model Sabalan Daneshvar, Mosleh Elyasi, and Morad Danishvar Proceedings of The World Congress on Engineering 2011 , pp1614-1618 [Online Full Text]
Multiresolution Edge Fusion using SWT and SFM Somkait Udomhunsakul, Pradab Yamsang, Suwut Tumthong, and Pusit Borwonwatanadelok Proceedings of The World Congress on Engineering 2011 , pp1619-1622 [Online Full Text]
A Study of Some New Features for the Palmprint Based Authentication Madasu Hanmandlu, Ritu Vijay, and Neha Mittal Proceedings of The World Congress on Engineering 2011 , pp1623-1628 [Online Full Text]
Automatic Absolute Distance Measurement with One Micrometer Uncertainty Using a Michelson Interferometer Khaled Alzahrani, David Burton, Francis Lilley, Munther Gdeisat, and Frederic Bezombes Proceedings of The World Congress on Engineering 2011 , pp1629-1633 [Online Full Text]
Digital Mammogram Segmentation using Non-Shannon Measures of Entropy Baljit Singh Khehra, and Amar Partap Singh Pharwaha Proceedings of The World Congress on Engineering 2011 , pp1634-1640 [Online Full Text]
Speaker Identification System based on PLP Coefficients and Artificial Neural Network Fatma zohra Chelali, Amar Djeradi, and Rachida Djeradi Proceedings of The World Congress on Engineering 2011 , pp1641-1646 [Online Full Text]
A Novel Prosthetic Hand Control Approach Based on Genetic Algorithm and Wavelet Packet Transform Features Mohammad Karimi Proceedings of The World Congress on Engineering 2011 , pp1647-1652 [Online Full Text]
First Order Fractional Fourier Transform Moment Based on Ambiguity Function Sedigheh Ghofrani Proceedings of The World Congress on Engineering 2011 , pp1653-1656 [Online Full Text]
A Novel Approach to the Restoration of AFM Images by Employing an Estimated Impulse Response for the AFM Calculated Using a Square Pillar Sample Ahmed Ahtaiba, Munther Gdeisat, David Burton, Francis Lilley, and Mark Murphy Proceedings of The World Congress on Engineering 2011 , pp1657-1662 [Online Full Text]
A Framework of Video News System Using Image Segmentation and Augmented Reality Jia-Hong Lee, Mei-Yi Wu, and Tzu-Hao Tseng Proceedings of The World Congress on Engineering 2011 , pp1663-1668 [Online Full Text]
A Content based CT Image Retrieval by Advance Multiple Comparison Technique J.Bridget Nirmala, and S.Gowri Proceedings of The World Congress on Engineering 2011 , pp1669-1674 [Online Full Text]
On an Adaptive Filter based on Simultaneous Perturbation Stochastic Approximation Method Hong Son Hoang, and Remy Baraille Proceedings of The World Congress on Engineering 2011 , pp1675-1680 [Online Full Text]
A Review of the Fingerprint, Speaker Recognition, Face Recognition and Iris Recognition Based Biometric Identification Technologies Tiwalade O. Majekodunmi, and Francis E. Idachaba Proceedings of The World Congress on Engineering 2011 , pp1681-1687 [Online Full Text]
An Interactive Colour Video Segmentation using Granular Reflex Fuzzy Neural Network Abhijeet V. Nandedkar Proceedings of The World Congress on Engineering 2011 , pp1688-1693 [Online Full Text]
Eclectic Genetic Algorithm for Holistic Face Recognition in L_infinite Space C. Villegas, J. Climent, C.R. Murillo, A. Otero, and C.R. Villegas Proceedings of The World Congress on Engineering 2011 , pp1694-1698 [Online Full Text]
Vector Median Filter with Directional Detector for Color Image Denoising Vladimir V. Khryashchev, Denis K. Kuykin, and Alina A. Studenova Proceedings of The World Congress on Engineering 2011 , pp1699-1704 [Online Full Text]
The 2011 International Conference of Wireless Networks Performance Analysis of Energy Consumption of AFECA in Wireless Sensor Networks Yun Won Chung Proceedings of The World Congress on Engineering 2011 , pp1705-1709 [Online Full Text]
A Comparison of Multiple Algorithms for Fingerprinting using IEEE802.11 Carlos Serodio, Luis Coutinho, Hugo Pinto, and Pedro Mestre Proceedings of The World Congress on Engineering 2011 , pp1710-1715 [Online Full Text]
Vertical Handover in Wireless Overlay Networks with Quality of Service Factors Nadia Qasim, and Muhammad Saleem Sheikh Proceedings of The World Congress on Engineering 2011 , pp1716-1721 [Online Full Text]
Deployment and Evaluation of IEEE 802.11 based Wireless Mesh Networks in Campus Environments Divya Bansal, Sanjeev Sofat, Puneet Chawla, and Prafulla Kumar Proceedings of The World Congress on Engineering 2011 , pp1722-1727 [Online Full Text]
Performance of Linear Maximum Likelihood Alamouti Decoder with Diversity Techniques Azlina Idris, Kaharudin Dimyati, and Sharifah K. Syed Yusof Proceedings of The World Congress on Engineering 2011 , pp1728-1731 [Online Full Text]
Data Collection, Communications and Processing in the Sumatran GPS Array (SuGAr) Ian Vince McLoughlin, Kai Juan Wong, and Su Lim Tan Proceedings of The World Congress on Engineering 2011 , pp1732-1736 [Online Full Text]
Power Optimization in Ad hoc Sensor Networks using Clustering Approach Andhe Dharani, Vijayalakshmi M. N, Vijay Singh, and Sumithra Devi K. A Proceedings of The World Congress on Engineering 2011 , pp1737-1740 [Online Full Text]
Comparing Wireless N (IEEE 802.11n) and Wireless G (IEEE 802.11g) Standards in terms of Performance and Reliability Albert K. Ansah, T. Kwantwi, and Agangiba W. Akotam Proceedings of The World Congress on Engineering 2011 , pp1741-1744 [Online Full Text]
Comparative Performance Evaluation of Wi-Fi IEEE 802.11 B,G WEP Point-to-Point Links J. A. R. Pacheco de Carvalho, H. Veiga, N. Marques, C. F. Ribeiro Pacheco, and A. D. Reis Proceedings of The World Congress on Engineering 2011 , pp1745-1750 [Online Full Text]
Adaptive Power Control in 802.11 Wireless Mesh Networks N. Botezatu, and R. Dhaou Proceedings of The World Congress on Engineering 2011 , pp1751-1754 [Online Full Text]
Congestion-less Energy Aware Token Based MAC Protocol Integrated with Sleep Scheduling for Wireless Sensor Networks Soumya Ray, Subhasis Dash, Nachiketa Tarasia, Anuja Ajay, and Amulya Ratan Swain Proceedings of The World Congress on Engineering 2011 , pp1755-1760 [Online Full Text]
Faster Investigation of Shear Modulus of Soil through Wireless Networking Zamri Chik, and S.M. Taohidul Islam Proceedings of The World Congress on Engineering 2011 , pp1761-1764 [Online Full Text]
A QoS Framework for Heterogeneous Networking Mahdi Aiash, Glenford Mapp, and Aboubaker Lasebae Proceedings of The World Congress on Engineering 2011 , pp1765-1769 [Online Full Text]
Laboratory Performance of Wi-Fi IEEE 802.11 B,G WPA2 Point-to-Point Links: a Case Study J. A. R. Pacheco de Carvalho, H. Veiga, N. Marques, C. F. Ribeiro Pacheco, and A. D. Reis Proceedings of The World Congress on Engineering 2011 , pp1770-1774 [Online Full Text]
An Energy Efficient Hybrid Node Scheduling Scheme in Cluster Based Wireless Sensor Networks Sounak Paul, and Naveen Kumar Sao Proceedings of The World Congress on Engineering 2011 , pp1775-1779 [Online Full Text]
Study of Wireless Sensor Networks as a Software Engineering Approach Pankaj Nagar, and Kripa Shanker Chaturvedi Proceedings of The World Congress on Engineering 2011 , pp1780-1785 [Online Full Text]
Propagation of IEEE802.15.4 in Vegetation Pedro Mestre, Jose Ribeiro, Carlos Serodio, and Joao Monteiro Proceedings of The World Congress on Engineering 2011 , pp1786-1791 [Online Full Text]
A Public Transport System Based Sensor Network for Fake Alcohol Detection Maneesha V Ramesh, and Riji N Das Proceedings of The World Congress on Engineering 2011 , pp1792-1795 [Online Full Text]
Power Allocation with Random Removal Scheme in Cognitive Radio System Deepti Kakkar, Arun khosla, and Moin Uddin Proceedings of The World Congress on Engineering 2011 , pp1796-1801 [Online Full Text]
Techniques Of Detection Of The Hidden Node In Wireless Ad Hoc Network MOSTEFA Fatima zohra, MEKKAKIA Maaza zoulikha, and KHELIFA Said Proceedings of The World Congress on Engineering 2011 , pp1802-1805 [Online Full Text]
A Novel Positioning Technique with Low Complexity in Wireless LAN: Hardware implementation Monji ZAIDI, Ridha OUNI, Jamila Bhar, and Rached TOURKI Proceedings of The World Congress on Engineering 2011 , pp1806-1812 [Online Full Text]
The 2011 International Conference of Data Mining and Knowledge Engineering A User-Interests Approach to Music Recommendation Ye-In Chang, Chen-Chang Wu, and Meng-Chang Tsai Proceedings of The World Congress on Engineering 2011 , pp1813-1817 [Online Full Text]
Chinese Researcher Profile Annotation Based on Conditional Random Fields with Semantic Rules Sun Jian, Xu Jungang, and Cen Zhiwang Proceedings of The World Congress on Engineering 2011 , pp1818-1822 [Online Full Text]
Representing, Storing and Mining Moving Objects Data Jorge Huere Pena, and Maribel Yasmina Santos Proceedings of The World Congress on Engineering 2011 , pp1823-1828 [Online Full Text]
Matching and Merging of Ontologies Using Conceptual Graphs Gopinath Ganapathy, and Ravi Lourdusamy Proceedings of The World Congress on Engineering 2011 , pp1829-1833 [Online Full Text]
Applying Weighted KNN to Word Sense Disambiguation A. R. Rezapour, S. M. Fakhrahmad, and M. H. Sadreddini Proceedings of The World Congress on Engineering 2011 , pp1834-1838 [Online Full Text]
A Fuzzy Clustering Approach to Filter Spam E-Mail N.T. Mohammad Proceedings of The World Congress on Engineering 2011 , pp1839-1844 [Online Full Text]
Towards Ontology Development for Teaching Programming Language Gopinath Ganapathi, Ravi Lourdusamy, and Veeraraghavan Rajaram Proceedings of The World Congress on Engineering 2011 , pp1845-1848 [Online Full Text]
Simultaneous Spectrophotometric and Chemometric Determination of Oleic, Linoleic, and Linolenic Fatty Acids in Vegetable Oils Gerard G. Dumancas, Mary Muriuki, Neil Purdie, and Lisa Reilly Proceedings of The World Congress on Engineering 2011 , pp1849-1854 [Online Full Text]
Knowledge Management via Facebook: Building a Framework for Knowledge Management on a Social Network by Aligning Business, IT and Knowledge Management Satidchoke Phosaard, and Mongkolchai Wiriyapinit Proceedings of The World Congress on Engineering 2011 , pp1855-1860 [Online Full Text]
Hierarchical Sequence Clustering Algorithm for Data Mining V. Umadevi Chezhian, Thanappan Subash, and M. Ragavan Samy Proceedings of The World Congress on Engineering 2011 , pp1861-1864 [Online Full Text]
StreamSVC: A New Approach To Cluster Large And High-Dimensional Data Streams Hasan Saberi, and Mohammadali Mehdiaghaei Proceedings of The World Congress on Engineering 2011 , pp1865-1870 [Online Full Text]
Gaining Competitive Advantage on the Basis of Data Warehousing and Data Architecture V.V.R. Raman, and Veena Tewari Proceedings of The World Congress on Engineering 2011 , pp1871-1876 [Online Full Text]
Extraction of Method Signatures from Ontology Towards Reusability for the Given System Requirement Specification S. Sagayaraj, and Gopinath Ganapathy Proceedings of The World Congress on Engineering 2011 , pp1877-1882 [Online Full Text]
Achieving High Recall and Precision with HTLM Documents: An Innovation Approach in Information Retrieval Ammar Al-Dallal, and Rasha S. Abdulwahab Proceedings of The World Congress on Engineering 2011 , pp1883-1888 [Online Full Text]
A Study of Intrusion Detection in Data Mining E.Kesavulu Reddy, V.Naveen Reddy, and P.Govinda Rajulu Proceedings of The World Congress on Engineering 2011 , pp1889-1894 [Online Full Text]
The Robust Classification for Large Data (Case: Classification of Jakarta Vegetation area by Using Remote Sensing Data) Dyah E. Herwindiati, Sani M. Isa, and Desi Arisandi Proceedings of The World Congress on Engineering 2011 , pp1895-1900 [Online Full Text]
Recommendation System Using Information Needs Radar Model C. W. Shih, M. Y. Chen, H. C. Chu, and Y. M. Chen Proceedings of The World Congress on Engineering 2011 , pp1901-1904 [Online Full Text]
The 2011 International Conference of Mechanical Engineering Contribution of Brownian Motion in Thermal Conductivity of Nanofluids S. M. Sohel Murshed, and C. A. Nieto de Castro Proceedings of The World Congress on Engineering 2011 , pp1905-1909 [Online Full Text]
Robust Stabilization of Jet Engine Compressor in the Presence of Noise and Unmeasured States John A. Akpobi, and Aloagbaye I. Momodu Proceedings of The World Congress on Engineering 2011 , pp1910-1923 [Online Full Text]
Computationally Efficient Calculation of Aerodynamic Flows Diego Alonso, Jose M. Vega, and Angel Velazquez Proceedings of The World Congress on Engineering 2011 , pp1924-1929 [Online Full Text]
Effect of Alumina Platelet Reinforcement on Dynamic Mechanical Properties of Epoxy Dharmendra Kumar Shukla, and Rachit Kumar Srivastava Proceedings of The World Congress on Engineering 2011 , pp1930-1934 [Online Full Text]
About the Simulation of Stochastically Excited Elastic Systems and Their Stability Vadim Potapov Proceedings of The World Congress on Engineering 2011 , pp1935-1940 [Online Full Text]
Using Stirling Engine to Increase the Efficiency of an IC Engine S. Prakash, and A. R. Guruvayurappan Proceedings of The World Congress on Engineering 2011 , pp1941-1943 [Online Full Text]
Thermal Analysis of SI-Engine using Simplified Finite Element Model Thet T. Mon, Rizalman Mamat, and Nazri Kamsah Proceedings of The World Congress on Engineering 2011 , pp1944-1948 [Online Full Text]
Comparative Analysis of SK-14 and PRINCE-15 Solar Concentrators Ajay Chandak, Sunil K. Somani, and Patil Milind Suryaji Proceedings of The World Congress on Engineering 2011 , pp1949-1951 [Online Full Text]
Flame Radiation Characteristics of Open Hydrocarbon Pool Fires E. Ufuah, and C. G. Bailey Proceedings of The World Congress on Engineering 2011 , pp1952-1958 [Online Full Text]
Numerical Simulation of Thermal Barrier Coating System under Thermo-mechanical Loadings A. Moridi, M. Azadi, and G.H. Farrahi Proceedings of The World Congress on Engineering 2011 , pp1959-1964 [Online Full Text]
Microscopic Analysis of Breakage in Materials for Hard Implants Cotoros Diana, Stanciu Anca, Baritz Mihaela, and Cristea Luciana Proceedings of The World Congress on Engineering 2011 , pp1965-1968 [Online Full Text]
Testing of the Shear Strength of Compressed Material at Increased Temperature I. Malujda, and K. Talaska Proceedings of The World Congress on Engineering 2011 , pp1969-1972 [Online Full Text]
Individual-Based Model to Simulate Crowd Dynamics Using Artificial Potential Fields Mohamed H. Mabrouk Proceedings of The World Congress on Engineering 2011 , pp1973-1980 [Online Full Text]
Impeller Treatment for a Centrifugal Fan using Splitter Vanes - A CFD Approach Madhwesh N., K. Vasudeva Karanth, and N. Yagnesh Sharma Proceedings of The World Congress on Engineering 2011 , pp1981-1986 [Online Full Text]
Feasibility Study of Using TiCN and CrN Thin Film Coatings to Enhance Lifetime of Grippers Used in Hard Disk Drive Assembly Line T. Sangkla, S. Bland, and K. Tuchinda Proceedings of The World Congress on Engineering 2011 , pp1987-1992 [Online Full Text]
Properties of (A384.1)1-x [(SiC)p]x Composites by Keeping Particle Size at 0.220 um Nrip Jit, Anand K Tyagi, Nirmal Singh, and Dayal Chand Proceedings of The World Congress on Engineering 2011 , pp1993-1997 [Online Full Text]
The Truck Mounted Concrete Boom Pump: A Dynamic Numerical Model G. Cazzulani, H. Giberti, F. Resta, and F. Ripamonti Proceedings of The World Congress on Engineering 2011 , pp1998-2003 [Online Full Text]
Numerical Analysis of Flow through Abrasive Water Suspension Jet: The Effect of Inlet Pressure on Wall Shear and Jet Exit Kinetic Energy Deepak D, Anjaiah D, and N Yagnesh Sharma Proceedings of The World Congress on Engineering 2011 , pp2004-2008 [Online Full Text]
Hydrogen Fuel Cell Design and Manufacturing Process Used for Public Transportation in Mexico City G. Luna-Sandoval, G. Urriolagoitia-C, L.H. Hernandez, G. Urriolagoitia-S, and E. Jimenez Proceedings of The World Congress on Engineering 2011 , pp2009-2014 [Online Full Text]
Neural Network Based Analysis of Thermal Properties Rubber Composite Material - Pneumatic Tire P. Balaguru, N. Krishna Mohan, and A. P . Sathiyagnanam Proceedings of The World Congress on Engineering 2011 , pp2015-2019 [Online Full Text]
Power Flows and Torque Analyses of an Independently Controllable Transmission with a Parallel Type Guan-Shyong Hwang, Chung-Chi Lin, Der-Min Tsay, Jao-Hwa Kuang, and Tzuen-Lih Chern Proceedings of The World Congress on Engineering 2011 , pp2020-2024 [Online Full Text]
Performance of Single Cylinder DI Diesel Engine - Varied Compression Ratio Fueled With Blends of Ethanol Eknath R. Deore, Ramchandra S. Jahagirdar, Milind Suryaji Patil, and Purushottam S. Desale Proceedings of The World Congress on Engineering 2011 , pp2025-2030 [Online Full Text]
A Performance Based Fire Analysis of Simple Beams Supporting Non-structural Concrete Slabs E. Ufuah Proceedings of The World Congress on Engineering 2011 , pp2031-2035 [Online Full Text]
Efficient Technique of Air-Conditioning S. D. Suryawanshi, Tarup M. Chordia, Nikita Nenwani, Harish Bawaskar, and Suraj Yambal Proceedings of The World Congress on Engineering 2011 , pp2036-2041 [Online Full Text]
Shape Optimization of Electrostatically Actuated Micro Cantilever Beam with Extended Travel Range Using Simulated Annealing R R Trivedi, M M Joglekar, R P Shimpi, and D N Pawaskar Proceedings of The World Congress on Engineering 2011 , pp2042-2047 [Online Full Text]
Analysis of Bending Specific Deformation in Composite Materials Using Comparative Methods Cotoros Diana, Stanciu Anca, Baritz Mihaela, and Duta Violeta Proceedings of The World Congress on Engineering 2011 , pp2048-2051 [Online Full Text]
Infrastructure Assessment: A Case Study of Aluminium Smelting Plant, Nigeria Okon B.B., and Elhag T.S.M. Proceedings of The World Congress on Engineering 2011 , pp2052-2056 [Online Full Text]
Effect of Interfacial Contact Forces in Lateral Contact Wire Strand B. K. Gnanavel, and N. S. Parthasarathy Proceedings of The World Congress on Engineering 2011 , pp2057-2063 [Online Full Text]
Determination of Kingpin Axis from Wheel Points Using Dual Quaternion Analysis Yung-Chang Chen, Hsing-Hui Huang, Ching-Hsu Hsieh, and Jia-Bin Lin Proceedings of The World Congress on Engineering 2011 , pp2064-2069 [Online Full Text]
Performance Characterization of Single Cylinder DI Diesel Engine Fueled with Karanja Biodiesel Ramchandra S. Jahagidar, Eknath R. Deore, Milind S. Patil, and Purushottam S. Desale Proceedings of The World Congress on Engineering 2011 , pp2070-2074 [Online Full Text]
Experimental Investigation of the Effect of Esterified Karanja Oil Biodiesel on Performance, Emission and Engine Wear of a Military 160hp Turbocharged CIDI Engine Anand Kumar Pandey, and M R Nandgaonkar Proceedings of The World Congress on Engineering 2011 , pp2075-2079 [Online Full Text]
Numerical Simulation of Induction Hardening of Torsion Bar H. Norouznejad, and G.H. Farrahi Proceedings of The World Congress on Engineering 2011 , pp2080-2083 [Online Full Text]
Independent Power Producer (IPP) Participation: Solution to Nigeria Power Generation Problem O. Phillips Agboola Proceedings of The World Congress on Engineering 2011 , pp2084-2087 [Online Full Text]
Design of a Hip Joint Simulator According to the ISO 14242 Nikolaos I. Galanis, and Dimitrios E. Manolakos Proceedings of The World Congress on Engineering 2011 , pp2088-2093 [Online Full Text]
Influence of Gravity on the Performance Index of Microchannel Heat Exchangers-Experimental Investigations Thanhtrung Dang, Jyh-tong Teng, and Jiann-cherng Chu Proceedings of The World Congress on Engineering 2011 , pp2094-2099 [Online Full Text]
An Application of the IMSC on a Non-linear Flexible Structure: Numerical Analysis and Experimental Validation G. Cazzulani, F. Resta, and F. Ripamonti Proceedings of The World Congress on Engineering 2011 , pp2100-2105 [Online Full Text]
Computer-Aided Modelling for a Poly Articulated Robotic Arm with Spherical Joints Violeta Dumitru, and Sorin Dumitru Proceedings of The World Congress on Engineering 2011 , pp2106-2111 [Online Full Text]
Statistical Approach for Tapered Bearing Fault Detection using Different Methods Sylvester A. Aye Proceedings of The World Congress on Engineering 2011 , pp2112-2115 [Online Full Text]
Studies on Delaminating Effects on Stress Development in Composite Structures Mohammed Haneef, Shabbir Ahmed R M, and Mohammed Mohsin Ali Proceedings of The World Congress on Engineering 2011 , pp2116-2121 [Online Full Text]
Experimental Identification of Convective Heat Transfer in Machine Tools P. Kohut, O. Horejs, and M. Mares Proceedings of The World Congress on Engineering 2011 , pp2122-2125 [Online Full Text]
Acoustic Emission based Tool Condition Monitoring System in Drilling Karali Patra Proceedings of The World Congress on Engineering 2011 , pp2126-2130 [Online Full Text]
A Portable Gait Monitoring System for Lower Limb Prosthetic Alignment Kian Sek Tee, Mohammed Awad, Abbas Dehghani, David Moser, and Saeed Zahedi Proceedings of The World Congress on Engineering 2011 , pp2131-2134 [Online Full Text]
Passive Anterior-Posterior Knee Stability After Unconstrained Unicompartmental Arthroplasty Ahmed Imran Proceedings of The World Congress on Engineering 2011 , pp2135-2137 [Online Full Text]
Aspects regarding the Water Jet Propulsion using Explosive Energy for Door Breaching M. Lupoae, D. Goga, D. Constantin, C. Baciu, and M. Moldovan Proceedings of The World Congress on Engineering 2011 , pp2138-2142 [Online Full Text]
Multicriteria Parametric Identification of a Mathematical Model of Metal Cutting Machine's Main Drive Yuliyan A. Angelov Proceedings of The World Congress on Engineering 2011 , pp2143-2146 [Online Full Text]
An Innovative Design of Solar based Building to Get Optimum Illumination and Create Better Living Environment with the Usage of Zero Electricity Mahendrakumar B. Maisuria, and Salim A. Channiwala Proceedings of The World Congress on Engineering 2011 , pp2147-2153 [Online Full Text]
A New Non-traditional Machining Method Using Cavitation Process Mehdi Hadi Proceedings of The World Congress on Engineering 2011 , pp2154-2158 [Online Full Text]
Study of the Parameters Affecting Erosion Wear of Ductile Material in Solid-Liquid Mixture Milind Suryaji Patil, Eknath R. Deore, Ramchandra S. Jahagirdar, and Santosh V Patil Proceedings of The World Congress on Engineering 2011 , pp2159-2163 [Online Full Text]
Triaxial Accelerometer Static Calibration Kian Sek Tee, Mohammed Awad, Abbas Dehghani, David Moser, and Saeed Zahedi Proceedings of The World Congress on Engineering 2011 , pp2164-2167 [Online Full Text]
A Computational Conjugate Thermal Analysis of HP Stage Turbine Blade Cooling with Innovative Cooling Passage Geometries Chandrakant R Kini, Satish Shenoy B, and N Yagnesh Sharma Proceedings of The World Congress on Engineering 2011 , pp2168-2173 [Online Full Text]
Bio-ethanol Derivation from Energy Crop in Nigeria: A Path to Food Scarcity or Bio-fuel Advancement O.Phillips Agboola, O. Mary Agboola, and F. Egelioglu Proceedings of The World Congress on Engineering 2011 , pp2174-2177 [Online Full Text]
New Insights Into Polyurethane Elastomers Obtained by Changing the Polyaddition Procedures C. Prisacariu, E. Scortanu, and B. Agapie Proceedings of The World Congress on Engineering 2011 , pp2178-2183 [Online Full Text]
A Balance for Measurement of Yaw, Lift and Drag on a Model in a Hypersonic Shock Tunnel S. Trivedi, and V. Menezes Proceedings of The World Congress on Engineering 2011 , pp2184-2189 [Online Full Text]
Design of a Switching PID Controller for a Magnetically Actuated Mass Spring Damper Shabnam Armaghan, Arefeh Moridi, and Ali Khaki Sedigh Proceedings of The World Congress on Engineering 2011 , pp2190-2193 [Online Full Text]
Contact Force Optimization For Stable Grasp Of Multifingire Robotic Grippers M. Suhaib, R. A. Khan, and S. Mukherjee Proceedings of The World Congress on Engineering 2011 , pp2194-2197 [Online Full Text]
Aspects Concerning Progressive Collapse of a Reinforced Concrete Frame Structure with Infill Walls M. Lupoae, C. Baciu, D. Constantin, and H. Puscau Proceedings of The World Congress on Engineering 2011 , pp2198-2203 [Online Full Text]
Parametric Optimization in WEDM of WC-Co Composite by Neuro-Genetic Technique P. Saha, P. Saha, and S. K. Pal Proceedings of The World Congress on Engineering 2011 , pp2204-2209 [Online Full Text]
Large Deflection Analysis of Clamped Circular Plates Murat Altekin, and R Faruk Yukseler Proceedings of The World Congress on Engineering 2011 , pp2210-2212 [Online Full Text]
Bolted Joining and Repair of Composite Stiffeners Nisha Mohan, Ankit Sharma, Kuldeep Sahu, Krishna Kumar, Vijayakumar Sahadevan, and P. Baskaran Proceedings of The World Congress on Engineering 2011 , pp2213-2217 [Online Full Text]
Squareness Evaluation using Computational Geometric Approach N. Venkaiah, and N. Srinagalakshmi Proceedings of The World Congress on Engineering 2011 , pp2218-2220 [Online Full Text]
The Active Modal Tuned Mass Damper (AMTMD) for Vibration Suppression in Flexible Structures G. Cazzulani, F. Resta, and F. Ripamonti Proceedings of The World Congress on Engineering 2011 , pp2221-2225 [Online Full Text]
Second Law Approach for Turbulent Flow in an Annular Duct Partly Filled with a Porous Substrate N. Allouache, and S. Chikh Proceedings of The World Congress on Engineering 2011 , pp2226-2230 [Online Full Text]
Experimental Studies on the Combustion Characteristics and Performance of A Direct Injection Engine Fueled with Biodiesel/Diesel Blends with SCR A.P. Sathiyagnanam, and C.G. Saravanan Proceedings of The World Congress on Engineering 2011 , pp2231-2236 [Online Full Text]
From Beam to Chassis: How to Increase NVH Performances with an Optimized Moment of Inertia Distribution E. Torricelli, L. D'Agostino, A. Baldini, and P. Moruzzi Proceedings of The World Congress on Engineering 2011 , pp2237-2241 [Online Full Text]
Research on the Contact Area between the Timing Belt and the Toothed Pulley G. Domek Proceedings of The World Congress on Engineering 2011 , pp2242-2244 [Online Full Text]
Three Dimensional Numerical Analysis of Conjugate Heat Transfer for Enhancement of Thermal Performance using Finned Tubes in an Economical Unglazed Solar Flat Plate Collector Manjunath M S, K. Vasudeva Karanth, and N Yagnesh Sharma Proceedings of The World Congress on Engineering 2011 , pp2245-2249 [Online Full Text]
Development of Energy Efficient R-134a Automotive Air Conditioning System Using Internal Heat Exchanger Avinash. D. Desai, S. N. Sapali, and Parthasarathi. V. Garikipati Proceedings of The World Congress on Engineering 2011 , pp2250-2255 [Online Full Text]
An SPH Approach for Fluid-Hypoelastic Structure Interactions with Free Surfaces Nima Amanifard, Muhammad Hesan, and Behnam Rahbar Proceedings of The World Congress on Engineering 2011 , pp2256-2261 [Online Full Text]
Biodiesel Oil Derived from Biomass Solid Waste Mohamed Y. E. Selim, Y. Haik, S.-A. B. Al-Omari, and H. Abdulrahman Proceedings of The World Congress on Engineering 2011 , pp2262-2267 [Online Full Text]
Comparative Study of the Phenomenon of Propagation of Elastic Waves in Conduits Abdessemed Fouzi, and Fourar Ali Proceedings of The World Congress on Engineering 2011 , pp2268-2273 [Online Full Text]
Mechanical Prediction of Materials Behaviour: Towards a Sustainable Infrastructural Growth Bassey Okon Proceedings of The World Congress on Engineering 2011 , pp2274-2278 [Online Full Text]
Pure Bending Determination of Stress-Strain Curves for an Aluminum Alloy D. Torres-Franco, G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderon, L. H. Hernandez-Gomez, A. Molina-Ballinas, C. Torres-Torres, and B. Romero-Angeles Proceedings of The World Congress on Engineering 2011 , pp2279-2283 [Online Full Text]
Mathematical Modelling for Hydrodynamic Studies of Spouted Bed B. Sahoo, and A. Sahoo Proceedings of The World Congress on Engineering 2011 , pp2284-2288 [Online Full Text]
Automotive Chassis Topology Optimization: a Comparison Between Spider and Coupe Designs Marco Cavazzuti, Dario Costi, Andrea Baldini, and Patrizio Moruzzi Proceedings of The World Congress on Engineering 2011 , pp2289-2293 [Online Full Text]
Adding Fillers to Change the Mechanical Behaviour of the Glass Composite Materials Camelia CERBU, Horatiu TEODORESCU, and Luminita SCUTARU Proceedings of The World Congress on Engineering 2011 , pp2294-2297 [Online Full Text]
Effect of Orientation on Elastic-plastic Fracture Toughness of Cortical Bone N.K. Sharma, D.K. Sehgal, and R.K. Pandey Proceedings of The World Congress on Engineering 2011 , pp2298-2302 [Online Full Text]
Solar Operated Multiple Granulated Pesticide Duster Abhishek Jivrag, Vinayak Chawre, and Aditya Bhagwat Proceedings of The World Congress on Engineering 2011 , pp2303-2307 [Online Full Text]
Numerical Simulation of the Mitral Valve Opening Using Smoothed Particle Hydrodynamics Nima Amanifard, Behnam Rahbar, and Muhammad Hesan Proceedings of The World Congress on Engineering 2011 , pp2308-2312 [Online Full Text]
Modeling and Simulation Methodology Techniques for Advanced Low Power Communication Circuits Salah-ddine Krit, Jalal Laassiri, and Said El Hajji Proceedings of The World Congress on Engineering 2011 , pp2313-2318 [Online Full Text]
Distortion Analysis of Arc Shaped Workpiece in NC Machining Mei Zhongyi, Wang Yunqiao, and Amir Saleem Proceedings of The World Congress on Engineering 2011 , pp2319-2324 [Online Full Text]
Designing of Sixlink Mechanism Schemes with the Changeable Contour Taking into Account Forces Transfer Y.S. Temirbekov, and S. Baimukhanov Proceedings of The World Congress on Engineering 2011 , pp2325-2328 [Online Full Text]
Measurement of Crushing Strength of Coal Agglomerates Ikebudu Kingsley Okechukwu, Chinwuko E. C, and Dara Jude Ezechi Proceedings of The World Congress on Engineering 2011 , pp2329-2332 [Online Full Text]
Impact of Jet Reynolds Number and Feed Channel Geometry on Heat Transfer in a Channel with Inclined Target Surface Cooled by Single Array of Centered Impinging Jets with Outflow in Both Directions Ali A. Al-Mubarak, S. M. Shaahid, and Luai M. Al-Hadhrami Proceedings of The World Congress on Engineering 2011 , pp2333-2338 [Online Full Text]
Thermal Convection of a Water-Based Nanofluid in an Enclosure with an Oscillating Wall Murat K. Aktas Proceedings of The World Congress on Engineering 2011 , pp2339-2344 [Online Full Text]
Experimental Testing of the Strength of Wood Subjected to Higher Temperature and Moisture Conditions - Tension I. Malujda, and K. Talaska Proceedings of The World Congress on Engineering 2011 , pp2345-2348 [Online Full Text]
Study on Energy Consumption in Turning Motion of Hexapod Walking Robots Shibendu Shekhar Roy, and Dilip Kumar Pratihar Proceedings of The World Congress on Engineering 2011 , pp2349-2354 [Online Full Text]
Numerical Simulation of a Solar Flat Plate Collector using Discrete Transfer Radiation Model (DTRM) - A CFD Approach K. Vasudeva Karanth, Manjunath M. S., and N. Yagnesh Sharma Proceedings of The World Congress on Engineering 2011 , pp2355-2360 [Online Full Text]
Tolerance Analysis of Involute Splines Jacek Kroczak, and Marian Dudziak Proceedings of The World Congress on Engineering 2011 , pp2361-2363 [Online Full Text]
Assessing Vehicular Inspection Centers using Multiple Decision-Making Criteria Mohamed Y. E. Selim, M. A. Maraqa, Y. E. Hawas, and A. M. O. Mohamed Proceedings of The World Congress on Engineering 2011 , pp2364-2369 [Online Full Text]
Simple Approach for Determination of Optimum Gradation Considering the Combined Index and Angularity Number of Stone Aggregates Mohamed Ilyas Anjum Proceedings of The World Congress on Engineering 2011 , pp2370-2374 [Online Full Text]
Drying of Oil Palm Frond via Swirling Fluidization Technique Mohd Faizal Mohideen, Mohd Faiz, Hamidon Salleh, Hanis Zakaria, and Vijay R. Raghavan Proceedings of The World Congress on Engineering 2011 , pp2375-2380 [Online Full Text]
Analysis Of Tire-road Contact Under Winter Conditions Konrad J. WALUS, and Zbigniew OLSZEWSKI Proceedings of The World Congress on Engineering 2011 , pp2381-2384 [Online Full Text]
Heat Transfer Simulation by CFD from Fins of an Air Cooled Motorcycle Engine under Varying Climatic Conditions Pulkit Agarwal, Mayur Shrikhande, and P. Srinivasan Proceedings of The World Congress on Engineering 2011 , pp2385-2389 [Online Full Text]
Optimization Methodology for an Automotive Hood Substructure (Inner Panel) D. Costi, E. Torricelli, L. Splendi, and M. Pettazzoni Proceedings of The World Congress on Engineering 2011 , pp2390-2393 [Online Full Text]
Aerostatic Spherical Bearing for Mass Properties Machine (MPM) Arun Kumar.S, A. Sekar, K.V. Govinda, and T.L. Danabalan Proceedings of The World Congress on Engineering 2011 , pp2394-2398 [Online Full Text]
Robust Springback Optimisation of DP600 Steels for U-Channel Forming Deniz Bekar, Erdem Acar, Firat Ozer, and Mehmet A. Guler Proceedings of The World Congress on Engineering 2011 , pp2399-2404 [Online Full Text]
Numerical Analysis into the Effects of the Unsteady Flow in an Automotive Hydrodynamic Torque Converter Pablo De la Fuente, Horst Stoff, Werner Volgmann, and Marek Wozniak Proceedings of The World Congress on Engineering 2011 , pp2405-2410 [Online Full Text]
Model Reduction for a Variable Geometry Fluid Thermal Problem Elliott Bache, Jose M. Vega, and A. Velazquez Proceedings of The World Congress on Engineering 2011 , pp2411-2416 [Online Full Text]
Performance and Modeling of a Direct Methanol Fuel Cell S. O. Bade Shrestha, and Sujith Mohan Proceedings of The World Congress on Engineering 2011 , pp2417-2422 [Online Full Text]
Investigation of the Virial Stress Distribution and its Relation with the Macroscopic Properties of a Single Crystal Copper Plate with an Elliptical Void Iman Ebrahimi, and Mehrdad Farid Proceedings of The World Congress on Engineering 2011 , pp2423-2426 [Online Full Text]
Limitations of Numerical Methods in Analysis of Contact Stresses of Joints in Mechanical Engineering Tomasz Podolski, and Marian Dudziak Proceedings of The World Congress on Engineering 2011 , pp2427-2430 [Online Full Text]
CFD Analysis of Multi-jet Air Impingement on Flat Plate Chougule N.K., Parishwad G.V., Gore P.R., Pagnis S., and Sapali S.N. Proceedings of The World Congress on Engineering 2011 , pp2431-2435 [Online Full Text]
Use of Cold Air Velocity Test (CAVT) to Locate Erosion Prone Zones in Pulverized Coal Fired Utility Boiler P R Dhamangaonkar, S R Kajale, M R Nandgaonkar, Abhishek Deshmukh, Aditya Deshmukh, and Swaroop Thakur Proceedings of The World Congress on Engineering 2011 , pp2436-2440 [Online Full Text]
Experimental Investigation of Convective Heat Transfer Coefficient of CNTs Nanofluid under Constant Heat Flux F. Rashidi, and N. Mosavari Nezamabad Proceedings of The World Congress on Engineering 2011 , pp2441-2446 [Online Full Text]
Comparative Approaches of Calculation of the Back Water Curves in a Trapezoidal Channel with Weak Slope Fourar Ali, Chiremsel Rachid, and Abdessemed Fouzi Proceedings of The World Congress on Engineering 2011 , pp2447-2451 [Online Full Text]
Design of Size Flexible and Leak Preventing Hydrobushing Min Lu Proceedings of The World Congress on Engineering 2011 , pp2452-2456 [Online Full Text]
Linear Identification of a Steam Generation Plant Magdi S. Mahmoud Proceedings of The World Congress on Engineering 2011 , pp2457-2465 [Online Full Text]
Buckling Analysis of Nonuniform Nanowires under Axial Compression Haw-Long Lee, Ruo-Ping Chang, and Win-Jin Chang Proceedings of The World Congress on Engineering 2011 , pp2466-2468 [Online Full Text]
Dynamic Modeling and Adaptive Control of a Cable-suspended Robot M. Zarebidoki, A. Lotfavar, and H.R Fahham Proceedings of The World Congress on Engineering 2011 , pp2469-2473 [Online Full Text]
Study of an Unsteady Flow at the Downstream of a Hydraulic Structure and its Influence on the Streambed Fourar Ali, and Lahbari Noureddine Proceedings of The World Congress on Engineering 2011 , pp2474-2479 [Online Full Text]
Generation of Energy Conservation Measures for Sponge Iron Plants Anil Kumar Prasad, Vivek Kumar, and Shabina Khanam Proceedings of The World Congress on Engineering 2011 , pp2480-2484 [Online Full Text]
Effects of Fuel Droplet Break-up, Heating and Evaporation in Diesel Engines W A Abdelghaffar, A E Elwardany, and S S Sazhin Proceedings of The World Congress on Engineering 2011 , pp2485-2490 [Online Full Text]
A New Knee Prosthesis Design Based on Human Lower Limb Cinematic Analysis Cristian Copilusi, Mihnea Marin, and Ligia Rusu Proceedings of The World Congress on Engineering 2011 , pp2491-2496 [Online Full Text]
High Pressure Structural Properties of Cerium Monopnictide Purvee Bhardwaj, and Sadhna Singh Proceedings of The World Congress on Engineering 2011 , pp2497-2500 [Online Full Text]
Finite Element Modelling of Titanium Foam Behaviour for Dental Application Wiwat Tanwongwan, and Julaluk Carmai Proceedings of The World Congress on Engineering 2011 , pp2501-2506 [Online Full Text]
Optimization of Hydraulic Engine Mounts through Simplified and Full Vehicle models Yadollah Rasekhipour, and Abdolreza Ohadi Proceedings of The World Congress on Engineering 2011 , pp2507-2513 [Online Full Text]
Shock-free Race Track of Road Roller Vibration Exciters S.U. Dzholdasbekov, and Y.S. Temirbekov Proceedings of The World Congress on Engineering 2011 , pp2514-2517 [Online Full Text]
Modeling and Identification of Building's Construction Defects V. Volkovas, and K. Petkevicius Proceedings of The World Congress on Engineering 2011 , pp2518-2522 [Online Full Text]
A Study of Impact Regime Boundary Transitions Paul W. Bland, and Sarin Tiranasawadi Proceedings of The World Congress on Engineering 2011 , pp2523-2528 [Online Full Text]
Statistical Linear Dynamic Control of Automatic Devices Jamal Tariq Mian, and Akram Muhammad Chaudhry Proceedings of The World Congress on Engineering 2011 , pp2529-2531 [Online Full Text]
Enhanced Multi-Channel Active Fuzzy Neural Network Noise Control in an Enclosure Navid Azadi, and Abdolreza Ohadi Proceedings of The World Congress on Engineering 2011 , pp2532-2536 [Online Full Text]
Multimodal Problems, Premature Convergence versus Computation Effort in Dynamic Design Optimization A A Alugongo Proceedings of The World Congress on Engineering 2011 , pp2537-2542 [Online Full Text]
Studies on Increasing Conductivity of Polyurethane Films and Nanofibers M. Yanilmaz, H. Karakas, A. Sezai Sarac, and F. Kalaoglu Proceedings of The World Congress on Engineering 2011 , pp2543-2545 [Online Full Text]
Towards All-Electric FSAE Race Cars S. Watkins, G. Pearson, and M. King Proceedings of The World Congress on Engineering 2011 , pp2546-2549 [Online Full Text]
Exact Analytical Solutions of Three Nonlinear Heat Transfer Models Mohammad Danish, Shashi Kumar, and Surendra Kumar Proceedings of The World Congress on Engineering 2011 , pp2550-2555 [Online Full Text]
Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of the Human Heart Hassan M A, Ahmed A. D. Sarhan, and Amano A Proceedings of The World Congress on Engineering 2011 , pp2556-2561 [Online Full Text]
Multi-Objective Optimization Of Cyclogram Mechanisms Machine-Automaton A. A. Assylbek Jomartov Proceedings of The World Congress on Engineering 2011 , pp2562-2565 [Online Full Text]
Isothermal Piston Skirts EHL Using Viscous Oil at Idling Speed Engine Start Up - Small Radial Clearance Effects Syed Adnan Qasim, and M. Afzaal Malik Proceedings of The World Congress on Engineering 2011 , pp2566-2571 [Online Full Text]
Determination of Residual Stresses Originated in a Die Process Using the Crack Compliance Method A. Molina-Ballinas, G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderon, L. H. Hernandez-Gomez, V. F. Verduzco-Cedeno, D. Torres-Franco, C. R. Torres-San Miguel, and B. Romero-Angeles Proceedings of The World Congress on Engineering 2011 , pp2572-2576 [Online Full Text]
Study Velocities Distribution of Unsteady Turbulent Flows in an Open Channel Fourar Ali, Merrouchi Farida, Abdessemed Fouzi, and Boudjellal Samia Proceedings of The World Congress on Engineering 2011 , pp2577-2580 [Online Full Text]
An Analytical Method for Failure Prediction of Composite Pinned Joints Olanrewaju Aluko Proceedings of The World Congress on Engineering 2011 , pp2581-2587 [Online Full Text]
Analysis of a Three Layered Straight Wire Rope Strand Using Finite Element Method Shibu. G, Mohankumar K.V, and Devendiran. S Proceedings of The World Congress on Engineering 2011 , pp2588-2593 [Online Full Text]
Influence of Proportion of Abrasive Particles in conveyor Liquid on Ultrasonic Cavitation Machining Process Mehdi Hadi Proceedings of The World Congress on Engineering 2011 , pp2594-2598 [Online Full Text]
Effect of Varying Inlet Valve Throat Diameter at Different IVO, IVC, and OVERLAP Angles on SI Engine Performance Osama H. Ghazal, Yousef S. Najjar, and Kutaeba J. AL-Khishali Proceedings of The World Congress on Engineering 2011 , pp2599-2603 [Online Full Text]
Finite Element Modeling of Delamination Crack Propagation in Laminated Composites Vipul Ranatunga Proceedings of The World Congress on Engineering 2011 , pp2604-2609 [Online Full Text]
An Optimization Method for an Aircraft Rear-end Conceptual Design Based on Surrogate Models Sergio de Lucas, Angel Velazquez, and Jose M. Vega Proceedings of The World Congress on Engineering 2011 , pp2610-2615 [Online Full Text]
Manufacturing of Long Thin Wall Tubes of Small Bore with Titanium Sukhwinder Singh Jolly Proceedings of The World Congress on Engineering 2011 , pp2616-2620 [Online Full Text]
Flow Control of a Hydraulic Headbox of Papermaking Machines M. Sumida, and S. Suzuki Proceedings of The World Congress on Engineering 2011 , pp2621-2625 [Online Full Text]
Stress Concentration around Circular/Elliptical/Triangular Cutouts in Infinite Composite Plate Dharmendra S Sharma Proceedings of The World Congress on Engineering 2011 , pp2626-2631 [Online Full Text]
The 2011 International Conference of Systems Biology and Bioengineering Computational Study on Obstructive Sleep Apnea Syndrome Using Patient - Specific Models Y. Fan, L. K. Cheung, M. M. Chong, K. W. Chow, and C. H. Liu Proceedings of The World Congress on Engineering 2011 , pp2632-2635 [Online Full Text]
Computational Modelling of Magnetic Resonance Elastography Shear Wave Behaviour through Atherosclerotic Plaque with Disease Development Lauren E. J. Thomas-Seale, Pankaj Pankaj, Neil Roberts, and Peter R. Hoskins Proceedings of The World Congress on Engineering 2011 , pp2636-2639 [Online Full Text]
Micro- and Meso-Scale Analyses for Quantifying Hypoxemia in Methemoglobinemia Tanmoy Sanyal, and Saikat Chakraborty Proceedings of The World Congress on Engineering 2011 , pp2640-2645 [Online Full Text]
On the Equilibrium Points and Some Properties of a SVEIRS Epidemic Model M. De la Sen, S. Alonso-Quesada, and A. Ibeas Proceedings of The World Congress on Engineering 2011 , pp2646-2652 [Online Full Text]
On the Electrical Current Trajectories for the Two-Dimensional Electrical Impedance Equation, When the Conductivity is a Cubic Polynomial Function M.P. Ramirez T., and J.J. Gutierrez C. Proceedings of The World Congress on Engineering 2011 , pp2653-2657 [Online Full Text]
Uncertainty through Polynomial Chaos in the EEG Problem Rob H. De Staelen Proceedings of The World Congress on Engineering 2011 , pp2658-2662 [Online Full Text]
Artificial Tactile Sensing Capability Analysis in Abnormal Mass Detection with Application in Clinical Breast Examination A. Mojra, S. Najarian, S.M. Towliat Kashani, and F. Panahi Proceedings of The World Congress on Engineering 2011 , pp2663-2666 [Online Full Text]
A Biomechanical Consideration on Immediate Post Operative Mobilisation after Medial Ulnar Collateral Ligament Reconstruction Qureish Vanat, Bin Wang, Minoo Esat, and Mahmoud Chizari Proceedings of The World Congress on Engineering 2011 , pp2667-2670 [Online Full Text]
Computer-Assisted Navigation for Acetabular Cup Placement: a Single Image Guiding System Jui-Ting Hsu, Ming-Tzu Tsai, Chih-Han Chang, Heng-Li Huang, and Kuo-An Lai Proceedings of The World Congress on Engineering 2011 , pp2671-2675 [Online Full Text]
A New Approach for Removal of Caffeine from Coffee using Sunflower Oil Md M Hossain, and Wei E. Chong Proceedings of The World Congress on Engineering 2011 , pp2676-2680 [Online Full Text]
Kinematics Analysis of the Elbow Joint; Comparison of the Kinematics of the Left and Right Elbow Mohammad Alrashidi, Ibrahim Yildiz, Qureish Vanat, Minoo Esat, and Mahmoud Chizari Proceedings of The World Congress on Engineering 2011 , pp2681-2684 [Online Full Text]
A SEIR Epidemic Model with Infectious Population Measurement M. De la Sen, S. Alonso-Quesada, and A. Ibeas Proceedings of The World Congress on Engineering 2011 , pp2685-2689 [Online Full Text]
Non-contacting Monitoring of Respiration and Pulse Based on Capacitive Coupling with Thoracic Tissue Daniel Teichmann, Jerome Foussier, Jing Jia, and Steffen Leonhardt Proceedings of The World Congress on Engineering 2011 , pp2695-2698 [Online Full Text]
On the Construction of Separable-Variables Conductivity Functions, and Their Application for Approaching Numerical Solutions of the Two-Dimensional Electrical Impedance Equation M.P. Ramirez T., M. C. Robles G., and R. A. Hernandez-Becerril Proceedings of The World Congress on Engineering 2011 , pp2699-2704 [Online Full Text]
Do Threaded Size and Surface Roughness Affect the Bone Stress and Bone-Implant Interfacial Sliding of Titanium Dental Implant? Heng-Li Huang, Ming-Tzu Tsai, Jui-Ting Hsu, Lih-Jyh Fuh, Ming-Gene Tu, and Aaron Yu-Jen Wu Proceedings of The World Congress on Engineering 2011 , pp2705-2708 [Online Full Text]
Abstract of Oral Presentation Only On Statistic for a New Test of Discordancy in Circular Data Abdul G. Hussin, Ali A., and Ibrahim M. Proceedings of The World Congress on Engineering 2011 , pp919-919 [Online Full Text]
|
|
International Association of Engineers © Copyright International Association of Engineers |